Engine-Codes.com
Engine-Codes – Chrysler – P0014 Chrysler

P0014 Chrysler Code - Exhaust Target Error Bank 1

Quick Answer

The P0014 code for Chrysler vehicles indicates an exhaust target error in Bank 1. Common causes include Faulty Camshaft Position Sensor: A defective camshaft position sensor can send incorrect signals to the engine control module, leading to an exhaust target error, Timing Chain Issues: A stretched or misaligned timing chain can cause the camshaft to be out of sync with the desired position, triggering the P0014 code, Camshaft Phaser Problems: If the camshaft phaser is malfunctioning or stuck, it can disrupt the timing of the camshaft, resulting in an exhaust target error. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0014 Chrysler indicates Exhaust Target Error Bank 1.
Common causes
Common causes include Faulty Camshaft Position Sensor: A defective camshaft position sensor can send incorrect signals to the engine control module, leading to an exhaust target error, Timing Chain Issues: A stretched or misaligned timing chain can cause the camshaft to be out of sync with the desired position, triggering the P0014 code, Camshaft Phaser Problems: If the camshaft phaser is malfunctioning or stuck, it can disrupt the timing of the camshaft, resulting in an exhaust target error.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Aug 30, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0014 Chrysler Description

The P0014 code for Chrysler vehicles indicates an exhaust target error in Bank 1. This means that there is a discrepancy between the desired position of the exhaust camshaft and the actual position detected by the camshaft position sensor. This can lead to poor engine performance, decreased fuel efficiency, and increased emissions. The exhaust target error could be caused by issues with the camshaft phaser, timing chain, camshaft sensor, or other related components. If left unaddressed, this issue can potentially cause damage to the engine and exhaust system.

OBDII Code P0014 Chrysler - Exhaust Target Error Bank 1
P0014 Chrysler Code - Exhaust Target Error Bank 1

Common Causes of P0014 Chrysler

  1. Faulty Camshaft Position Sensor: A defective camshaft position sensor can send incorrect signals to the engine control module, leading to an exhaust target error.
  2. Timing Chain Issues: A stretched or misaligned timing chain can cause the camshaft to be out of sync with the desired position, triggering the P0014 code.
  3. Camshaft Phaser Problems: If the camshaft phaser is malfunctioning or stuck, it can disrupt the timing of the camshaft, resulting in an exhaust target error.
  4. Wiring or Connection Problems: Corroded or damaged wiring, connectors, or terminals related to the camshaft position sensor can cause communication errors and trigger the code.

Symptoms of P0014 Chrysler

  1. Check Engine Light: The most common symptom associated with the P0014 code is the illumination of the Check Engine Light on the vehicle's dashboard.
  2. Engine Misfires: A faulty camshaft position can lead to engine misfires, rough idling, or hesitation during acceleration.
  3. Decreased Fuel Efficiency: An exhaust target error can result in poor fuel efficiency, causing the vehicle to consume more fuel than usual.
  4. Loud Engine Noise: A malfunctioning camshaft phaser or timing chain can cause loud noises coming from the engine, especially during startup or acceleration.

How to Fix P0014 Chrysler

  1. Diagnose the Issue: Use a scan tool to read the stored diagnostic trouble codes and perform a thorough inspection of the camshaft position sensor, timing chain, and related components.
  2. Replace Camshaft Position Sensor: If the sensor is found to be faulty, replace it with a new one and reset the error codes.
  3. Inspect Timing Chain: Check the timing chain for wear, stretch, or misalignment. Replace if necessary.
  4. Check Camshaft Phaser: Verify the operation of the camshaft phaser and replace it if it is malfunctioning.
  5. Clear Error Codes: After completing the repairs, clear the error codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P0014 Chrysler

The cost of repairing the P0014 code for Chrysler vehicles can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the parts required for this repair, such as a camshaft position sensor or timing chain, can range from $100 to $500. The labor cost can range from $200 to $500, bringing the total repair cost to around $300 to $1000. Keep in mind that the final cost may be higher if additional components need to be replaced or if the repairs are performed at a dealership or in a high-cost area. It is recommended to obtain quotes from local auto repair shops for a more accurate estimate.

Need more information about the P0014 Chrysler code?

Need more information on how to fix the P0014 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0014 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0014 Chrysler Code

1. What does the OBDII code P0014 mean on a Chrysler?

P0014 indicates "Exhaust Target Error Bank 1," meaning the exhaust camshaft timing is over-advanced compared to the engine control module’s (ECM) target value in cylinder bank 1.

2. What are the common symptoms of code P0014 in a Chrysler?

Symptoms may include rough idling, poor engine performance, reduced fuel efficiency, difficulty starting, and illuminated check engine light.

3. What causes the P0014 code to appear in a Chrysler?

Potential causes include a faulty camshaft position actuator, low engine oil levels, dirty or degraded oil, timing chain issues, or a malfunctioning ECM.

4. Can low oil cause the P0014 code on a Chrysler?

Yes, low or dirty engine oil can affect the camshaft actuator's performance, leading to the P0014 code.

5. How do I fix the P0014 code on my Chrysler?

Start by checking and replacing the engine oil if needed. If the issue persists, inspect the camshaft position actuator, timing chain, and related components for wear or damage.

6. Is it safe to drive a Chrysler with the P0014 code?

Driving with this code is not recommended, as it can lead to poor engine performance and potentially severe damage if left unresolved.

7. How much does it cost to repair a P0014 code on a Chrysler?

Repair costs can vary; an oil change may cost $50-$100, while replacing a camshaft actuator or timing chain could range from $200 to $1,000, depending on labor and parts.

8. Can a faulty ECM cause the P0014 code on a Chrysler?

While rare, a malfunctioning ECM can fail to properly control camshaft timing, triggering the P0014 code.

9. How is the P0014 code diagnosed in a Chrysler?

A mechanic will use a scan tool to confirm the code, inspect engine oil levels, check the camshaft position actuator, and verify the timing chain's condition.

10. What tools are needed to troubleshoot the P0014 code on a Chrysler?

You’ll need an OBDII scanner, basic hand tools, and possibly a multimeter or an oil pressure gauge to test related components.

Discuss the causes and fixes for P0014 Chrysler OBDII Code

Submit a New Comment

Code P0014 Chrysler comments

No comments found for this page.