P0014 CHEVROLET - Exhaust Camshaft Position System Performance
P0014 CHEVROLET Possible Causes
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
First diagnose P0014 CHEVROLET code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0014 CHEVROLET Tech NotesThere is a factory service bulletin for the following Chevrolet models:
2004-2009 Chevrolet TrailBlazer
2004-2009 Chevrolet Colorado
2004-2009 Chevrolet TrailBlazer, Colorado Factory Service Bulletin OBDII Code P0014
P0014 / P0306 2002 Trailblazer Wells Vehicle Electronics
User Submitted Video
Cost of diagnosing the P0014 CHEVROLET code
Labor: 1.0The cost of diagnosing the P0014 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0014 CHEVROLET Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0014 CHEVROLET MeaningThe Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation.
P0014 CHEVROLET More InformationNeed more information on how to fix the P0014 CHEVROLET code?
Get Access to Factory Service Manuals