Engine-Codes.com
Engine-Codes – Nissan – P0011 2008 Nissan Versa

P0011 2008 Nissan Versa Code - Intake Valve Timing Control Performance Bank 1

Quick Answer

The OBD-II code P0011 in a 2008 Nissan Versa indicates a problem with the Intake Valve Timing Control Performance on Bank 1. Common causes include Faulty intake valve timing control solenoid, Camshaft position sensor malfunction, Camshaft phaser issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0011 2008 Nissan Versa indicates Intake Valve Timing Control Performance Bank 1.
Common causes
Common causes include Faulty intake valve timing control solenoid, Camshaft position sensor malfunction, Camshaft phaser issues.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0011 2008 Nissan Versa Description

The OBD-II code P0011 in a 2008 Nissan Versa indicates a problem with the Intake Valve Timing Control Performance on Bank 1. In simpler terms, this means that there is an issue with the timing of the intake valves opening and closing in relation to the engine's operation. The engine control module (ECM) uses the intake valve timing control to optimize engine performance, fuel efficiency, and emissions.

OBDII Code P0011 2008 Nissan Versa - Intake Valve Timing Control Performance Bank 1
P0011 2008 Nissan Versa Code - Intake Valve Timing Control Performance Bank 1

Common Causes of P0011 2008 Nissan Versa

  1. Faulty intake valve timing control solenoid
  2. Camshaft position sensor malfunction
  3. Camshaft phaser issues
  4. Timing chain wear or stretch
  5. Oil control valve failure

Symptoms of P0011 2008 Nissan Versa

  1. Decreased engine power and acceleration
  2. Rough idling or engine misfires
  3. Reduced fuel efficiency
  4. Engine vibrations
  5. Limp mode activation

How to Fix P0011 2008 Nissan Versa

  1. Diagnose the issue using an OBD-II scanner to confirm the P0011 code and identify the specific component causing the problem.
  2. Inspect and test the intake valve timing control solenoid, camshaft position sensor, camshaft phaser, timing chain, and oil control valve for proper operation.
  3. Replace the faulty component that is causing the timing control issue, whether it be the solenoid, sensor, phaser, timing chain, or oil control valve.
  4. Clear the OBD-II code and test drive the vehicle to ensure the issue has been resolved.
  5. Perform a relearn procedure if necessary to calibrate the new component with the ECM for proper operation.

Cost to Fix P0011 2008 Nissan Versa

The typical repair costs for addressing the P0011 code in a 2008 Nissan Versa can range from $200 to $800, depending on the specific component that needs replacement and the labor costs involved. Parts such as the intake valve timing control solenoid or camshaft position sensor can range from $50 to $200, while more complex components like the camshaft phaser or timing chain can cost upwards of $500. Labor rates at auto repair shops can vary, but on average, expect to pay between $80 and $150 per hour for this type of repair. It's advisable to check with local shops for more accurate pricing based on your location and vehicle specifics.

What does this mean?

Tech Notes for P0011 2008 Nissan Versa

Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code.

When is the Code Detected?

When there is a gap between angle of target and phase-control angle degree, the valve will stop working and the ECM will trigger the P0011 code.

Need more information about the P0011 2008 Nissan Versa code?

Need more information on how to fix the P0011 2008 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0011 2008 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0011 2008 Nissan Versa Code

1. What are the common symptoms of OBDII code P0011 in a 2008 Nissan Versa?

- Common symptoms include rough idling, poor acceleration, engine misfires, and a noticeable decrease in fuel efficiency.

2. What does the OBDII code P0011 "Intake Valve Timing Control Performance Bank 1" mean for a 2008 Nissan Versa?

- This code indicates that there is an issue with the intake valve timing control on bank 1, which can affect the engine's performance.

3. What are the possible causes of OBDII code P0011 in a 2008 Nissan Versa?

- Possible causes include a faulty intake valve timing control solenoid, issues with the camshaft or crankshaft position sensors, timing chain problems, or low engine oil levels.

4. How can I diagnose the OBDII code P0011 in my 2008 Nissan Versa?

- Diagnosing this code may involve checking the intake valve timing control solenoid, inspecting the timing chain, testing the camshaft and crankshaft position sensors, and ensuring proper engine oil levels.

5. Can driving with OBDII code P0011 in a 2008 Nissan Versa cause further damage?

- Continuing to drive with this code may lead to engine performance issues and potentially cause damage to other engine components over time.

6. How can I repair OBDII code P0011 in my 2008 Nissan Versa?

- Repairing this code typically involves replacing the faulty intake valve timing control solenoid, addressing any timing chain issues, and ensuring the proper functioning of camshaft and crankshaft position sensors.

7. Is it safe to continue driving my 2008 Nissan Versa with OBDII code P0011?

- It is not recommended to drive the vehicle with this code present, as it can lead to decreased engine performance and potential long-term damage.

8. Can resetting the OBDII code P0011 in a 2008 Nissan Versa fix the issue?

- Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the code to appear.

9. How much does it typically cost to repair OBDII code P0011 in a 2008 Nissan Versa?

- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Will OBDII code P0011 in a 2008 Nissan Versa affect the vehicle's emissions?

- Yes, this code can impact the vehicle's emissions output, potentially causing it to fail emissions tests if not addressed promptly.

Discuss the causes and fixes for P0011 2008 Nissan Versa OBDII Code

Submit a New Comment

Code P0011 2008 Nissan Versa comments

No comments found for this page.