P0010 SATURN - Intake Camshaft Position Actuator Solenoid Control Circuit
P0010 SATURN Possible Causes
- Dirty Oil
- Low engine oil level
- Faulty Intake Camshaft Position Actuator Solenoid
- Intake Camshaft Position Actuator Solenoid harness is open or shorted
- Intake Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code P0010 SATURN?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
User Submitted Video
Cost of diagnosing the P0010 SATURN code
Labor: 1.0The cost of diagnosing the P0010 SATURN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?The ECM has detected a fault in the Camshaft Acutator Solenoid circuit
- Engine Light ON (or Service Engine Soon Warning Light)
P0010 SATURN MeaningThe Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation.
P0010 SATURN More InformationNeed more information on how to fix the P0010 SATURN code?
Get Access to Factory Service Manuals