Engine-Codes - Honda - P0010 2009 HONDA ACCORD

P0010 2009 HONDA ACCORD Code - Variable Control Timing Oil Control Solenoid Valve Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0010 2009 HONDA ACCORD code possible causes

  • Dirty Oil
  • Low engine oil level
  • Valve Timing Control (VTC) open or shorted circuit.
  • Valve Timing Control (VTC) electrical connector
  • Faulty Valve Timing Control (VTC)
  • Damaged ECM

|How is the P0010 2009 HONDA ACCORD code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P0010 2009 HONDA ACCORD code

Labor: 1.0

The cost to diagnose the P0010 2009 HONDA ACCORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P0010 2009 HONDA ACCORD code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of power
  • Engine rough idle

|What is P0010 2009 HONDA ACCORD code meaning?

The Engine Control Module (ECM) optimizes the valve timing using the Valve Timing Control (VTC). The ECM sends a target duty cycle control signal to the VTC. This control signal regulates the oil pressure supplied to the VTC. The VTC can advance or retard the engine timing.

|Need more information with the P0010 2009 HONDA ACCORD code?

Need more information on how to fix the P0010 2009 HONDA ACCORD code?
Get Access to Factory Service Manuals

|Need help with a P0010 2009 HONDA ACCORD code?

Get the P0010 2009 Honda Accord code diagnosed by a professional: Find a repair shop in your area