Engine-Codes
 
OBDII Code List
 
P0010 2000 TOYOTA COROLLA

P0010 2000 TOYOTA COROLLA - Camshaft Position 'A' Actuator Circuit Bank 1 3ZZ-FE Engine

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P0010 2000 TOYOTA COROLLA Possible Causes

  • Dirty Oil
  • Variable Valve Timing (VVT) circuit is open or shorted
  • Oil Control Valve (OCV) circuit is open or shorted
  • Faulty variable valve timing (VVT)
  • Faulty oil control valve (OCV)
  • Damaged ECM

First diagnose P0010 2000 TOYOTA COROLLA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

P0010 2000 TOYOTA COROLLA Tech Notes

If the engine oil is clean and the VVT and OCV circuits are OK, replaced the VVT to resolve the problem.

Cost of diagnosing the P0010 2000 TOYOTA COROLLA code

    Labor: 1.0

    The cost of diagnosing the P0010 2000 TOYOTA COROLLA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0010 2000 TOYOTA COROLLA code detected?

After the ECM sends the target duty cycle signal to the OCV, the ECM monitors the OCV current to establish an actual duty cycle. The ECM determines the existence of a malfunction and sets the DTC when the actual duty cycle ratio varies from the target duty cycle ratio.

P0010 2000 TOYOTA COROLLA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of power
  • Engine rough idle

P0010 2000 TOYOTA COROLLA Meaning

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.
OBDII Code P0010 2000 TOYOTA COROLLA - Camshaft Position 'A' Actuator Circuit Bank 1 3ZZ-FE Engine - Engine-Codes.com

P0010 2000 TOYOTA COROLLA More Information

Need more information on how to fix the P0010 2000 TOYOTA COROLLA code?
Get Access to Factory Service Manuals

Related Information