P000C BMW - 'A' Camshaft Position Slow Response Bank 2
P000C BMW Possible Causes
- Erratic camshaft position due to low oil pressure
- Oil flow restriction in the oil passages or the variable camshaft timing (VCT) valve body
- Camshaft advance mechanism binding (VCT unit)
- Damaged VCT phaser
- Radio frequency interference (RFI)
How is the P000C BMW code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P000C BMW code
Labor: 1.0The cost to diagnose the P000C BMW code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P000C BMW MeaningThe Powertrain Control Module (PCM) monitors and evaluates the response of the actual position on a target position change. The setpoint and camshaft position are saved at the beginning of a setpoint change. If this change over time is large enough (gradient), the camshaft phasing change is evaluated. If the change after the diagnostic time is smaller than a threshold, a slow response is detected, and if the value is greater, then there is no concern. By detecting a concern, an antibounce counter is incremented otherwise the counter is decremented. If the counter exceeds an adjustable limit, the P000C is set.
More InformationNeed more information on how to fix the P000C BMW code?
Get Access to Factory Service Manuals