C1951 Lexus Code - Rear Stabilizer Target Angle Not Attained
Quick Answer
The C1951 code for Lexus vehicles indicates that the rear stabilizer target angle has not been attained. Common causes include Worn or damaged stabilizer bar links, Loose or broken stabilizer bar bushings, Misaligned stabilizer bar brackets. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1951 Lexus indicates Rear Stabilizer Target Angle Not Attained.
- Common causes
- Common causes include Worn or damaged stabilizer bar links, Loose or broken stabilizer bar bushings, Misaligned stabilizer bar brackets.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1951 Lexus Description
The C1951 code for Lexus vehicles indicates that the rear stabilizer target angle has not been attained. This means that the vehicle's rear stabilizer system, which is responsible for maintaining stability and control during cornering and rough road conditions, is not functioning as intended. The rear stabilizer, also known as the sway bar or anti-roll bar, is a crucial component of the suspension system that helps reduce body roll and keeps the vehicle level during turns.
Common Causes of C1951 Lexus
- Worn or damaged stabilizer bar links
- Loose or broken stabilizer bar bushings
- Misaligned stabilizer bar brackets
- Improper installation of stabilizer components
- Corrosion or rust on stabilizer bar components
Symptoms of C1951 Lexus
- Increased body roll during turns
- Excessive sway or instability when driving over bumps or uneven surfaces
- Clunking or rattling noises from the rear suspension
- Uneven tire wear, especially on the rear tires
- Difficulty maintaining control of the vehicle at higher speeds
How to Fix C1951 Lexus
- Diagnose the specific cause of the issue by inspecting the rear stabilizer system for any visible damage or wear.
- Replace worn or damaged stabilizer bar links, bushings, or brackets with new parts.
- Ensure proper alignment and installation of the stabilizer components to meet the target angle specifications.
- Test drive the vehicle to verify that the rear stabilizer target angle is attained and that the handling performance has improved.
- Perform a final inspection to check for any abnormal noises or handling issues before returning the vehicle to the owner.
Cost to Fix C1951 Lexus
The typical repair costs for addressing a rear stabilizer target angle not attained code can range from $200 to $500, including parts and labor. However, the actual cost may vary depending on the specific components that need replacement, the vehicle's make and model, and the labor rates at the auto repair shop. It is recommended to consult with a qualified mechanic or service center to obtain a more accurate estimate based on the individual circumstances. Keep in mind that diagnosis time and labor rates can fluctuate, so it's advisable to inquire about these factors before proceeding with the repair.
Need more information about the C1951 Lexus code?
Need more information on how to fix the C1951 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1951 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1951 Lexus Code
1. What are the common symptoms of OBDII code C1951 in a Lexus related to the rear stabilizer target angle not being attained?
The common symptoms include stability control system warning lights illuminated on the dashboard, erratic handling or steering response, and potential noises coming from the rear of the vehicle.
2. What could cause the OBDII code C1951 in a Lexus indicating that the rear stabilizer target angle is not attained?
Possible causes of this code include faulty rear stabilizer bar components, damaged stabilizer bar links, misaligned or damaged rear suspension components, or issues with the vehicle's steering angle sensor.
3. How can I diagnose the OBDII code C1951 in a Lexus related to the rear stabilizer target angle?
Diagnosing this code typically involves using a diagnostic scanner to retrieve the trouble codes, inspecting the rear stabilizer bar and related components for any visible damage, and conducting a thorough inspection of the rear suspension system.
4. Are there any DIY repair tips for fixing the OBDII code C1951 in a Lexus due to the rear stabilizer target angle issue?
DIY repair tips may include visually inspecting the rear stabilizer bar and links for any signs of damage, ensuring proper alignment of the rear suspension components, and checking the steering angle sensor for any faults.
5. Can driving with the OBDII code C1951 in a Lexus indicating rear stabilizer target angle not attained be dangerous?
Continuing to drive with this code present can potentially impact the vehicle's stability and handling, so it is recommended to address the issue promptly to ensure safe driving conditions.
6. Is it necessary to take my Lexus to a professional mechanic for repairs if the OBDII code C1951 is triggered?
While some DIY checks and repairs may be possible, it is advisable to consult a qualified mechanic or Lexus dealership for a thorough diagnosis and proper repair of the rear stabilizer target angle issue.
7. How much does it typically cost to repair the OBDII code C1951 in a Lexus related to the rear stabilizer target angle?
The cost of repairs can vary depending on the exact cause of the issue, but it may involve replacing damaged stabilizer bar components, suspension parts, or recalibrating the steering angle sensor, which can range from a few hundred to over a thousand dollars.
8. Can resetting the OBDII system clear the C1951 code related to the rear stabilizer target angle in a Lexus?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear once the system detects the problem again.
9. How long can I safely drive my Lexus with the OBDII code C1951 indicating rear stabilizer target angle not attained?
It is recommended to address the issue as soon as possible to prevent any potential safety hazards or further damage to the vehicle. Continuing to drive with this code present may compromise the vehicle's stability and handling.
10. Will fixing the OBDII code C1951 in a Lexus related to the rear stabilizer target angle impact the vehicle's performance?
Addressing and resolving the issue causing the C1951 code can help restore the vehicle's stability, handling, and overall performance, ensuring a safer and more comfortable driving experience.
Discuss the causes and fixes for C1951 Lexus OBDII Code
Code C1951 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.