Engine-Codes.com
Engine-Codes – Generic – C191E

C191E Code - Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU

Quick Answer

The diagnostic trouble code C191E indicates a malfunction in the signal communication between the Steering Control ECU (Electronic Control Unit) and the Rear Active Stabilizer Control ECU in the vehicle. Common causes include Faulty wiring harness or connectors leading to poor signal communication, Defective sensors in either the Steering Control ECU or the Rear Active Stabilizer Control ECU, Corrosion or damage to the connectors or terminals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C191E indicates Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU.
Common causes
Common causes include Faulty wiring harness or connectors leading to poor signal communication, Defective sensors in either the Steering Control ECU or the Rear Active Stabilizer Control ECU, Corrosion or damage to the connectors or terminals.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code C191E Description

The diagnostic trouble code C191E indicates a malfunction in the signal communication between the Steering Control ECU (Electronic Control Unit) and the Rear Active Stabilizer Control ECU in the vehicle. The Steering Control ECU is responsible for managing the vehicle's steering system, while the Rear Active Stabilizer Control ECU controls the rear active stabilizer system, which helps to improve the vehicle's stability and handling.

OBDII Code C191E - Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU
C191E Code - Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU

Common Causes of C191E

  1. Faulty wiring harness or connectors leading to poor signal communication.
  2. Defective sensors in either the Steering Control ECU or the Rear Active Stabilizer Control ECU.
  3. Corrosion or damage to the connectors or terminals.
  4. Issues with the control units themselves, such as internal faults or malfunctions.
  5. Electrical interference or disruptions affecting the signal transmission between the ECUs.

Symptoms of C191E

  1. Illumination of the stability control warning light on the dashboard.
  2. Unusual noises coming from the rear of the vehicle, especially during turns.
  3. Decreased stability and handling while driving, especially at higher speeds.
  4. Increased body roll or swaying when cornering.
  5. Difficulty controlling the vehicle, particularly during maneuvers that require precise steering input.

How to Fix C191E

  1. Begin by conducting a thorough diagnosis using a diagnostic scanner to retrieve the specific error codes and pinpoint the exact cause of the malfunction.
  2. Inspect the wiring harness, connectors, and terminals for any damage, corrosion, or loose connections. Repair or replace any faulty components as needed.
  3. Test the sensors in both the Steering Control ECU and the Rear Active Stabilizer Control ECU to ensure they are functioning correctly. Replace any defective sensors.
  4. If the issue persists, consider testing the control units themselves for internal faults. Replace the faulty control unit if necessary.
  5. Once the repairs are complete, clear the error codes and test drive the vehicle to verify that the issue has been resolved and that the systems are functioning properly.

Cost to Fix C191E

The typical repair costs for addressing a malfunction in the signal from the Steering Control ECU to the Rear Active Stabilizer Control ECU can vary depending on the extent of the issue and the specific components that need to be replaced. In general, the cost of parts for this repair could range from $200 to $800, while labor costs could range from $150 to $400. Therefore, the total cost of the repair could be anywhere from $350 to $1200 or more.

Need more information about the C191E code?

Need more information on how to fix the C191E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C191E code diagnosed by a professional: Find a repair shop in your area

Code C191E Information for Specific Makes

  • C191E Lexus — Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU
  • C191E Toyota — Malfunction In Signal From Steering Control ECU To Rear Active Stabilizer Control ECU
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C191E Code

1. What are the common symptoms of OBDII code C191E?

- Common symptoms include stability control warning lights on the dashboard, issues with steering response, and potential problems with the rear active stabilizer system.

2. What can cause OBDII code C191E to trigger?

- This code can be triggered by a malfunction in the signal communication between the steering control ECU and the rear active stabilizer control ECU.

3. How serious is OBDII code C191E?

- This code is considered serious as it can affect the stability and control of the vehicle, especially during driving conditions that require precise handling.

4. How can I diagnose the cause of OBDII code C191E?

- Diagnosing the cause of this code typically involves using a diagnostic scanner to read the code, checking the wiring connections between the ECUs, and testing the components for any faults.

5. Can I drive my vehicle with OBDII code C191E?

- It is not recommended to drive the vehicle with this code active, as it can compromise the stability and safety of the vehicle.

6. How can I repair OBDII code C191E?

- Repairing this code may involve repairing or replacing faulty wiring connections, resetting the ECUs, or replacing the steering control ECU or rear active stabilizer control ECU if necessary.

7. Will resetting the trouble codes make OBDII code C191E go away?

- Resetting the trouble codes may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear.

8. Can weather conditions affect the occurrence of OBDII code C191E?

- Extreme weather conditions or moisture can potentially impact the signal communication between the ECUs, leading to the triggering of this code.

9. Is it possible to prevent OBDII code C191E from occurring?

- Regular maintenance checks, ensuring proper wiring connections, and addressing any issues with the stability control system promptly can help prevent this code from occurring.

10. How much does it cost to repair OBDII code C191E?

- The repair cost for OBDII code C191E can vary depending on the underlying issue, the extent of the repair needed, and labor costs. It is recommended to consult with a professional mechanic for an accurate estimate.

Discuss the causes and fixes for C191E OBDII Code

Submit a New Comment

Code C191E comments

No comments found for this page.