C1904 Mercury Code - Ride Control Right Rear Shock Actuator Circuit Short To Ground
Quick Answer
The diagnostic code C1904 for a Mercury vehicle indicates a problem with the Ride Control Right Rear Shock Actuator Circuit being shorted to ground. Common causes include Wiring harness damage or short circuit, Faulty shock actuator, Corrosion or poor connection in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1904 Mercury indicates Ride Control Right Rear Shock Actuator Circuit Short To Ground.
- Common causes
- Common causes include Wiring harness damage or short circuit, Faulty shock actuator, Corrosion or poor connection in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1904 Mercury Description
The diagnostic code C1904 for a Mercury vehicle indicates a problem with the Ride Control Right Rear Shock Actuator Circuit being shorted to ground. This means that there is an electrical issue in the circuit that controls the right rear shock absorber, which is responsible for managing the vehicle's suspension system. The shock actuator is a crucial component that helps adjust the damping of the shock absorber to optimize ride comfort and handling.
Common Causes of C1904 Mercury
- Wiring harness damage or short circuit
- Faulty shock actuator
- Corrosion or poor connection in the circuit
- Electrical system malfunction
- Impact or physical damage to the shock absorber
Symptoms of C1904 Mercury
- Rough or bouncy ride
- Reduced stability during cornering or braking
- Uneven tire wear
- Decreased handling and control
- Increased vibration and noise while driving
How to Fix C1904 Mercury
- Begin by inspecting the wiring harness and connections for any visible damage or corrosion.
- Test the shock actuator to determine if it is functioning correctly or needs to be replaced.
- Check for any loose or broken connections in the circuit and repair as necessary.
- Clear the diagnostic trouble code from the vehicle's computer using a scan tool.
- Test drive the vehicle to ensure that the issue has been resolved and that the suspension system is functioning properly.
Cost to Fix C1904 Mercury
The typical repair costs for addressing a Ride Control Right Rear Shock Actuator Circuit Short To Ground issue can range from $200 to $500, depending on the extent of the damage and the cost of replacement parts. This estimate includes both parts and labor. It is important to note that the specific diagnosis time and labor rates at auto repair shops can vary, so it's advisable to obtain quotes from multiple sources to get an accurate estimate for your specific vehicle.
Need more information about the C1904 Mercury code?
Need more information on how to fix the C1904 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1904 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1904 Mercury Code
What does the OBDII code C1904 indicate?
The OBDII code C1904 indicates a problem with the right rear shock actuator circuit, specifically a short to ground condition.
What are common symptoms of a C1904 code?
Common symptoms include a warning light on the dashboard, a rough ride, or reduced ride control performance in the rear of the vehicle.
What could cause the C1904 code to trigger?
Causes may include damaged wiring or connectors, a faulty shock actuator, or issues with the vehicle’s ride control system.
How can I diagnose the C1904 code?
Start by visually inspecting the wiring and connectors for damage. Use a multimeter to check for continuity and shorts in the actuator circuit.
What is the typical repair for a C1904 code?
Repairs often involve fixing or replacing damaged wiring, connectors, or the right rear shock actuator itself.
Can I clear the C1904 code without fixing the issue?
Yes, you can clear the code, but it will likely reappear if the underlying issue is not resolved.
Will driving with a C1904 code cause further damage?
While it may not cause immediate damage, ignoring the issue can lead to further wear on the suspension system and compromised ride quality.
How much does it typically cost to repair a C1904 code?
Repair costs can vary widely, but expect to pay anywhere from $100 to $600, depending on whether you need to replace wiring, connectors, or the shock actuator.
Is it safe to drive a vehicle with a C1904 code?
While it may be drivable, it’s not recommended to drive with this code as it can affect handling and safety due to compromised ride control.
Discuss the causes and fixes for C1904 Mercury OBDII Code
Code C1904 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.