C1902 Mercury Code - Ride Control Right Rear Shock Actuator Circuit Open
Quick Answer
The C1902 diagnostic trouble code (DTC) for Mercury vehicles indicates a problem with the Ride Control Right Rear Shock Actuator Circuit being open. Common causes include Damaged wiring or connectors in the right rear shock actuator circuit, Faulty right rear shock actuator, Blown fuse related to the shock actuator circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1902 Mercury indicates Ride Control Right Rear Shock Actuator Circuit Open.
- Common causes
- Common causes include Damaged wiring or connectors in the right rear shock actuator circuit, Faulty right rear shock actuator, Blown fuse related to the shock actuator circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1902 Mercury Description
The C1902 diagnostic trouble code (DTC) for Mercury vehicles indicates a problem with the Ride Control Right Rear Shock Actuator Circuit being open. This means that there is an issue with the electrical circuit that controls the right rear shock absorber in the vehicle's suspension system. The shock actuator is responsible for adjusting the damping characteristics of the shock absorber to provide a smooth and controlled ride quality. When this circuit is open, it can lead to a loss of control over the shock absorber's performance, resulting in poor handling, ride comfort, and stability.
Common Causes of C1902 Mercury
- Damaged wiring or connectors in the right rear shock actuator circuit
- Faulty right rear shock actuator
- Blown fuse related to the shock actuator circuit
- Malfunctioning suspension control module
- Corrosion or poor connections in the circuit
Symptoms of C1902 Mercury
- Increased bouncing or bouncing after hitting bumps
- Harsh ride quality
- Reduced stability during cornering
- Uneven tire wear
- Illumination of the suspension warning light on the dashboard
How to Fix C1902 Mercury
- Begin by visually inspecting the wiring and connectors in the right rear shock actuator circuit for any signs of damage or corrosion.
- Test the shock actuator using a multimeter to check for proper functionality.
- Check and replace any blown fuses related to the shock actuator circuit.
- If the shock actuator is faulty, replace it with a new unit.
- Clear the DTC using a diagnostic scanner and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix C1902 Mercury
The typical repair costs for addressing the Ride Control Right Rear Shock Actuator Circuit Open code can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary significantly, so it's advisable to check with local shops for a more accurate estimate. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive pricing.
Need more information about the C1902 Mercury code?
Need more information on how to fix the C1902 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1902 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1902 Mercury Code
What does the OBDII code C1902 mean for my Mercury vehicle?
The OBDII code C1902 indicates that there is an open circuit in the right rear shock actuator, which affects the ride control system.
What symptoms might I experience if my vehicle has the C1902 code?
Common symptoms include a rough ride, instability while driving, and warning lights on the dashboard related to the suspension or ride control system.
What could cause the C1902 code to trigger?
The C1902 code can be triggered by a faulty shock actuator, damaged wiring or connectors, or issues with the ride control module.
How can I diagnose the C1902 code?
To diagnose this code, check for any damaged wiring or loose connections in the right rear shock actuator circuit and test the actuator's functionality with a multimeter.
Is it safe to drive my vehicle with the C1902 code?
While it may be safe to drive short distances, the compromised ride control system can lead to decreased vehicle stability, so it's advisable to have it repaired as soon as possible.
What are some common repairs for the C1902 code?
Common repairs include replacing the right rear shock actuator, repairing or replacing damaged wiring, or replacing the ride control module if necessary.
Can I clear the C1902 code myself?
Yes, you can clear the code using an OBDII scanner, but if the underlying issue is not resolved, the code will likely return.
How much will it cost to fix the C1902 code?
Repair costs can vary widely, but you might expect to pay anywhere from $100 to $500 depending on whether the issue is with the actuator, wiring, or module.
Will the C1902 code affect my vehicle's performance?
Yes, the C1902 code can affect ride comfort and handling, potentially leading to a less stable driving experience.
Discuss the causes and fixes for C1902 Mercury OBDII Code
Code C1902 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.