C1710 GMC Code - Right Rear Center Sensor Circuit Fault
Quick Answer
The C1710 GMC code indicates a fault in the right rear center sensor circuit of the vehicle. Common causes include Damaged wiring or connectors in the right rear center sensor circuit, Faulty right rear center sensor, Issues with the ABS control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1710 GMC indicates Right Rear Center Sensor Circuit Fault.
- Common causes
- Common causes include Damaged wiring or connectors in the right rear center sensor circuit, Faulty right rear center sensor, Issues with the ABS control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1710 GMC Description
The C1710 GMC code indicates a fault in the right rear center sensor circuit of the vehicle. This sensor is part of the vehicle's anti-lock braking system (ABS) and is responsible for monitoring wheel speed and sending signals to the ABS control module. When this sensor circuit is compromised, it can lead to issues with the ABS system, affecting the vehicle's ability to brake efficiently and maintain stability during braking.
Common Causes of C1710 GMC
- Damaged wiring or connectors in the right rear center sensor circuit.
- Faulty right rear center sensor.
- Issues with the ABS control module.
- Corrosion or debris affecting the sensor's performance.
- Electrical interference or short circuits in the sensor circuit.
Symptoms of C1710 GMC
- Illumination of the ABS warning light on the dashboard.
- Decreased braking performance, especially during hard braking or slippery road conditions.
- ABS system being disabled, leading to potential loss of stability during braking.
- Unusual noises coming from the ABS system, such as grinding or clicking sounds.
- Difficulty maintaining control of the vehicle during sudden stops.
How to Fix C1710 GMC
- Begin by conducting a thorough inspection of the right rear center sensor circuit, checking for any visible damage to the wiring or connectors.
- Test the right rear center sensor with a multimeter to determine if it is functioning correctly.
- If the sensor is confirmed to be faulty, replace it with a new sensor that is compatible with the vehicle's ABS system.
- Clear the diagnostic trouble codes from the ABS control module using a scan tool and test the vehicle to ensure that the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to identify any underlying issues with the ABS control module or other components of the system.
Cost to Fix C1710 GMC
The typical repair costs for addressing a C1710 GMC code related to a right rear center sensor circuit fault can vary depending on the specific cause of the issue and the cost of parts and labor. In general, the cost of replacing a faulty sensor and conducting diagnostic testing can range from $200 to $500. However, additional costs may apply if there are underlying issues with the ABS control module or other components that need to be addressed.
Need more information about the C1710 GMC code?
Need more information on how to fix the C1710 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1710 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1710 GMC Code
1. What does the C1710 code mean on a GMC vehicle?
The C1710 code indicates a fault in the right rear center sensor circuit, typically related to the parking or proximity sensor system.
2. What are the symptoms of a C1710 code on a GMC?
Symptoms may include a malfunctioning parking assist system, warning lights on the dashboard, or incorrect distance readings from the sensors.
3. What causes the C1710 code to appear?
Common causes include damaged wiring, a faulty right rear center sensor, corroded connectors, or a failure in the control module.
4. How do I diagnose the C1710 code on my GMC?
Start by visually inspecting the right rear center sensor and its wiring for damage or corrosion. Use an OBDII scanner to confirm the code and test the sensor’s functionality with a multimeter.
5. Can I drive my GMC with a C1710 code?
Yes, but the parking assist system may not function correctly, increasing the risk of collisions when parking or reversing.
6. How do I fix the C1710 code on a GMC?
Repairs may involve replacing the faulty sensor, repairing damaged wiring or connectors, or addressing issues with the control module.
7. How much does it cost to fix a C1710 code on a GMC?
Repair costs can range from $50 to $300 depending on whether the sensor, wiring, or other components need replacement.
8. Can a dirty sensor cause the C1710 code?
Yes, dirt or debris on the right rear center sensor can interfere with its performance and potentially trigger the code.
9. Do I need a mechanic to fix the C1710 code?
If you're comfortable with basic automotive repairs, you can try fixing it yourself. Otherwise, a certified mechanic can diagnose and repair the issue efficiently.
10. Will clearing the C1710 code solve the problem?
Clearing the code with an OBDII scanner will reset the warning temporarily, but the issue will return if the underlying problem is not resolved.
Discuss the causes and fixes for C1710 GMC OBDII Code
Code C1710 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.