C1562 2018 GMC Sierra Code - Device Voltage Reference Output 2 Circuit Malfunction
Quick Answer
The C1562 code indicates a malfunction in the Device Voltage Reference Output 2 circuit within the 2018 GMC Sierra. Common causes include Wiring Issues: Damaged or frayed wiring in the voltage reference circuit can disrupt the signal, Corroded Connectors: Corrosion at connectors can impede electrical flow, leading to voltage reference issues, Faulty Sensors: A malfunctioning sensor that draws too much current can affect the voltage reference output. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1562 2018 GMC Sierra indicates Device Voltage Reference Output 2 Circuit Malfunction.
- Common causes
- Common causes include Wiring Issues: Damaged or frayed wiring in the voltage reference circuit can disrupt the signal, Corroded Connectors: Corrosion at connectors can impede electrical flow, leading to voltage reference issues, Faulty Sensors: A malfunctioning sensor that draws too much current can affect the voltage reference output.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1562 2018 GMC Sierra Description
The C1562 code indicates a malfunction in the Device Voltage Reference Output 2 circuit within the 2018 GMC Sierra. This code is part of the vehicle's onboard diagnostic system, which monitors various electrical circuits and components for proper functionality. The voltage reference outputs are critical for the operation of various sensors and modules throughout the vehicle, including those related to the engine, transmission, and stability control systems. When the voltage reference output is compromised, it can lead to erratic sensor readings, which may affect the vehicle's performance and safety features.
Common Causes of C1562 2018 GMC Sierra
- Wiring Issues: Damaged or frayed wiring in the voltage reference circuit can disrupt the signal.
- Corroded Connectors: Corrosion at connectors can impede electrical flow, leading to voltage reference issues.
- Faulty Sensors: A malfunctioning sensor that draws too much current can affect the voltage reference output.
- Short Circuits: A short circuit in the wiring harness can cause a drop in voltage, triggering the code.
- ECM Malfunction: A failure in the Engine Control Module itself may lead to incorrect voltage reference signals.
Symptoms of C1562 2018 GMC Sierra
- Check Engine Light: The most common symptom is the illumination of the check engine light on the dashboard.
- Erratic Sensor Readings: Inconsistent or incorrect readings from various sensors, such as the throttle position sensor or wheel speed sensors.
- Poor Engine Performance: Noticeable reduction in engine power, stalling, or hesitation during acceleration.
- Traction Control or ABS Malfunction: Warning lights for traction control or anti-lock braking systems may appear, indicating a potential failure in these systems.
- Increased Fuel Consumption: A malfunctioning voltage reference can lead to inefficient fuel usage, resulting in higher fuel costs.
How to Fix C1562 2018 GMC Sierra
- Visual Inspection: Begin with a thorough visual inspection of the wiring and connectors associated with the Device Voltage Reference Output 2 circuit for any signs of damage or corrosion.
- Test Voltage Outputs: Use a multimeter to check the voltage outputs from the reference circuit to ensure they are within specifications.
- Repair or Replace Wiring: If damaged wiring or corroded connectors are found, repair or replace them as necessary to restore proper electrical flow.
- Sensor Testing: Test the related sensors for functionality; replace any faulty sensors that may be affecting the voltage reference.
- ECM Diagnostics: If all else fails, perform a diagnostic check on the ECM to rule out internal failures or software issues.
Cost to Fix C1562 2018 GMC Sierra
The cost to repair a C1562 code can vary widely based on the underlying cause and the specific repairs needed. On average, you might expect to pay between $150 and $600 for parts and labor. Simple repairs, such as fixing wiring or replacing connectors, may cost on the lower end of that range, while more complex issues, such as replacing sensors or the ECM, could push costs higher. It's important to note that diagnostic time and labor rates can vary significantly based on location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour; however, rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It is advisable to check local rates for a more precise estimate.
Need more information about the C1562 2018 GMC Sierra code?
Need more information on how to fix the C1562 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1562 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1562 2018 GMC Sierra Code
1. What does the OBDII code C1562 mean on a 2018 GMC Sierra?
C1562 indicates a malfunction in the Device Voltage Reference Output 2 Circuit, which affects the voltage supplied to specific components.
2. What are common symptoms of code C1562 on a GMC Sierra?
Symptoms include warning lights on the dashboard, erratic behavior of components relying on the voltage reference, or loss of functionality in certain systems.
3. What causes the C1562 code to appear?
Common causes include wiring issues, damaged connectors, a faulty control module, or grounding problems in the voltage reference circuit.
4. How can I diagnose the C1562 code on my GMC Sierra?
Use an OBDII scanner to confirm the code, visually inspect wiring and connectors, and perform voltage tests on the related circuit.
5. Can a faulty ground connection cause the C1562 code?
Yes, a poor or damaged ground connection can disrupt the voltage reference circuit and trigger this code.
6. Is it safe to drive with the C1562 code active on a GMC Sierra?
It’s not recommended, as the code can impact critical systems, potentially leading to erratic vehicle behavior.
7. What parts should I check when troubleshooting code C1562?
Inspect the wiring harness, connectors, voltage reference circuit paths, and the control module associated with the circuit.
8. How do I fix the C1562 code on my GMC Sierra?
Repairs may involve fixing damaged wiring, replacing faulty connectors, or replacing the control module if it’s determined to be defective.
9. Will clearing the code fix the problem permanently?
Clearing the code might remove it temporarily, but the underlying issue must be addressed to prevent it from returning.
10. Should I take my GMC Sierra to a mechanic for the C1562 code?
If you’re not experienced with electrical diagnostics, it’s advisable to consult a qualified mechanic for accurate troubleshooting and repairs.
Discuss the causes and fixes for C1562 2018 GMC Sierra OBDII Code
Code C1562 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.