C1472 Mercury Code - Master Cylinder Pressure/Travel Plausibility Failure
Quick Answer
The C1472 code indicates a Master Cylinder Pressure/Travel Plausibility Failure, which is a diagnostic trouble code (DTC) specific to certain Mercury vehicles. Common causes include Air trapped in the brake lines, affecting hydraulic pressure, Leaking brake fluid from the master cylinder or associated components, Worn or damaged seals within the master cylinder. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1472 Mercury indicates Master Cylinder Pressure/Travel Plausibility Failure.
- Common causes
- Common causes include Air trapped in the brake lines, affecting hydraulic pressure, Leaking brake fluid from the master cylinder or associated components, Worn or damaged seals within the master cylinder.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1472 Mercury Description
The C1472 code indicates a Master Cylinder Pressure/Travel Plausibility Failure, which is a diagnostic trouble code (DTC) specific to certain Mercury vehicles. This code suggests that the vehicle's onboard diagnostic system has detected an inconsistency between the pressure readings from the master cylinder and the expected travel of the brake pedal. The master cylinder is a crucial component of the braking system, responsible for converting the force applied to the brake pedal into hydraulic pressure that engages the brakes.
Common Causes of C1472 Mercury
- Air trapped in the brake lines, affecting hydraulic pressure.
- Leaking brake fluid from the master cylinder or associated components.
- Worn or damaged seals within the master cylinder.
- Malfunctioning brake pressure sensors or electronic control units.
- Improperly adjusted brake pedal travel or linkage issues.
Symptoms of C1472 Mercury
- Soft or spongy brake pedal feel.
- Increased stopping distances or delayed braking response.
- Brake warning light illuminated on the dashboard.
- Unusual noises when applying the brakes, such as grinding or squeaking.
- Fluid leaks around the master cylinder or brake lines.
How to Fix C1472 Mercury
- Diagnostic Assessment: Begin with a thorough diagnostic assessment using an OBD-II scanner to confirm the C1472 code and check for any additional codes that may provide further insight into the braking system's condition.
- Visual Inspection: Conduct a visual inspection of the master cylinder, brake lines, and associated components for any signs of leaks, damage, or wear.
- Bleeding the Brake System: If air is suspected in the brake lines, perform a brake bleed procedure to remove trapped air and restore proper hydraulic pressure.
- Replace Faulty Components: If leaks or damaged seals are found, replace the master cylinder or any affected brake components as necessary.
- Recalibration and Testing: After repairs, recalibrate the brake system if required and conduct a test drive to ensure that the braking performance has returned to normal and that the C1472 code does not reappear.
Cost to Fix C1472 Mercury
The typical repair costs for addressing a C1472 code can vary widely based on the specific issue identified during diagnostics. On average, the cost may range from $150 to $600, which includes parts and labor. For example, replacing a master cylinder can cost between $200 and $400, while labor may add another $100 to $200 depending on the shop's hourly rate. It's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops commonly charge between $80 and $150 per hour; however, rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. Therefore, it is advisable to check local rates for a more precise estimate.
Need more information about the C1472 Mercury code?
Need more information on how to fix the C1472 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1472 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1472 Mercury Code
1. What are the common symptoms of OBDII code C1472 (Master Cylinder Pressure/Travel Plausibility Failure) in a Mercury vehicle?
- Common symptoms include the illumination of the check engine light, decreased braking performance, spongy brake pedal feel, or complete brake failure.
2. What are the possible causes of OBDII code C1472 in a Mercury vehicle?
- The code C1472 may be triggered by issues such as a faulty brake master cylinder, air in the brake system, low brake fluid level, or a malfunctioning brake pressure sensor.
3. How serious is OBDII code C1472 in a Mercury vehicle?
- OBDII code C1472 is a serious issue as it indicates a potential failure in the master cylinder pressure/travel plausibility, which directly affects the vehicle's braking system and safety.
4. Can I continue driving my Mercury with OBDII code C1472 present?
- It is not recommended to drive the vehicle with OBDII code C1472 present, as it may lead to compromised braking performance and safety hazards.
5. How can I diagnose OBDII code C1472 in my Mercury?
- Diagnosis typically involves using a professional OBDII scanner to retrieve the code, followed by inspecting the brake system components, such as the master cylinder, brake fluid level, and pressure sensor.
6. What are some repair tips for resolving OBDII code C1472 in a Mercury?
- Repair tips may include checking and replenishing brake fluid, bleeding the brake system, inspecting for leaks, testing the brake pressure sensor, and replacing the master cylinder if necessary.
7. How much does it cost to repair OBDII code C1472 in a Mercury?
- The cost of repairing OBDII code C1472 can vary depending on the specific issue causing the code, the labor rates in your area, and the cost of parts needed for the repair.
8. Can a DIY enthusiast fix OBDII code C1472 in a Mercury at home?
- While some aspects of diagnosing and repairing OBDII code C1472 may be tackled by experienced DIY enthusiasts, working on the brake system can be complex and potentially dangerous, so it is advisable to seek professional assistance.
9. Is it necessary to reset the OBDII system after repairing code C1472 in a Mercury?
- Yes, it is important to reset the OBDII system after repairing code C1472 to clear the fault code and ensure that the issue has been successfully resolved.
10. How can I prevent OBDII code C1472 from reoccurring in my Mercury?
- Regular maintenance of the brake system, including checking brake fluid levels, inspecting for leaks, and addressing any issues promptly, can help prevent the recurrence of OBDII code C1472 in your Mercury.
Discuss the causes and fixes for C1472 Mercury OBDII Code
Code C1472 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.