C1407 Jeep Code - Transfer Case Brake Control Circuit Low
Quick Answer
The C1407 code for Jeep vehicles refers to an issue with the Transfer Case Brake Control Circuit being detected as low. Common causes include Faulty transfer case brake control module, Damaged wiring or connectors in the circuit, Malfunctioning transfer case actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1407 Jeep indicates Transfer Case Brake Control Circuit Low.
- Common causes
- Common causes include Faulty transfer case brake control module, Damaged wiring or connectors in the circuit, Malfunctioning transfer case actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1407 Jeep Description
The C1407 code for Jeep vehicles refers to an issue with the Transfer Case Brake Control Circuit being detected as low. The transfer case brake control system is responsible for engaging and disengaging the transfer case, which allows the vehicle to switch between two-wheel drive and four-wheel drive modes. When this circuit is detected as low, it means that there is a problem with the electrical signal or voltage in the transfer case brake control system.
Common Causes of C1407 Jeep
- Faulty transfer case brake control module
- Damaged wiring or connectors in the circuit
- Malfunctioning transfer case actuator
- Issues with the transfer case itself
- Corrosion or moisture in the electrical components of the system
Symptoms of C1407 Jeep
- Difficulty engaging or disengaging four-wheel drive
- Illumination of the 4WD warning light on the dashboard
- Unusual noises coming from the transfer case
- Reduced traction or stability when driving in slippery conditions
- Limited ability to switch between drive modes
How to Fix C1407 Jeep
- Begin by conducting a thorough inspection of the transfer case brake control circuit, including the module, wiring, connectors, and actuator.
- Test the voltage and continuity in the circuit to identify any areas of concern.
- Replace any damaged wiring or connectors, ensuring proper connections and insulation.
- If the transfer case brake control module is faulty, replace it with a new unit and reprogram it as necessary.
- Test the system after repairs are completed to ensure proper functionality and address any remaining issues.
Cost to Fix C1407 Jeep
The typical repair costs for addressing a Transfer Case Brake Control Circuit Low issue can vary depending on the specific cause of the problem and the extent of the repairs needed. In general, parts for this repair could range from $200 to $500, while labor costs may range from $150 to $300. It's important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and the shop's labor rates. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate cost estimate tailored to your specific situation.
Need more information about the C1407 Jeep code?
Need more information on how to fix the C1407 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1407 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1407 Jeep Code
1. What does the OBDII code C1407 mean on a Jeep?
C1407 indicates a "Transfer Case Brake Control Circuit Low," meaning there is an issue with the electrical circuit that controls the transfer case brake.
2. What are the common symptoms of the C1407 code?
Symptoms include the 4WD system not engaging or disengaging properly, the transfer case being stuck in one mode, or warning lights like the ABS or 4WD light illuminating.
3. What causes the C1407 code to appear on a Jeep?
Common causes include a faulty transfer case brake solenoid, damaged or corroded wiring, a bad electrical connection, or an issue with the vehicle’s control module.
4. Can a bad transfer case brake solenoid trigger the C1407 code?
Yes, a malfunctioning or failed transfer case brake solenoid is one of the primary causes of this code.
5. How do I diagnose the C1407 code on my Jeep?
Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to test the transfer case brake solenoid and check for proper voltage and continuity in the circuit.
6. Can I drive my Jeep with the C1407 code active?
While it may be possible to drive, the 4WD system could operate unpredictably. It’s best to address the issue to avoid further damage or loss of 4WD functionality.
7. How do I fix the C1407 code on a Jeep?
Repairs may include replacing the transfer case brake solenoid, repairing damaged wiring, cleaning corroded connectors, or reprogramming the control module if needed.
8. How much does it cost to repair the C1407 code on a Jeep?
Costs vary depending on the issue. Replacing the transfer case brake solenoid may cost $150–$300, while wiring repairs or diagnostics may add to the expense.
9. Can a software issue in the control module cause the C1407 code?
Yes, a software glitch or failure in the control module can sometimes cause this code, though it is less common than physical issues with the solenoid or wiring.
10. How can I prevent the C1407 code from recurring?
Regular maintenance, such as inspecting the wiring and connectors for damage or corrosion, and ensuring the transfer case components are operating smoothly, can help prevent this code.
Discuss the causes and fixes for C1407 Jeep OBDII Code
Code C1407 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.