C1405 Dodge Code - Transfer Case Range Position Sensor Circuit High
Quick Answer
The C1405 diagnostic trouble code for Dodge vehicles specifically refers to an issue with the Transfer Case Range Position Sensor Circuit being too high. Common causes include Faulty Sensor: The transfer case range position sensor itself may be malfunctioning, sending incorrect voltage readings to the vehicle's computer, Wiring Issues: There could be a problem with the wiring harness connecting the sensor to the computer, such as a short circuit or open circuit, Computer Malfunction: The vehicle's computer system may be unable to interpret the data from the sensor correctly, leading to the high voltage reading. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1405 Dodge indicates Transfer Case Range Position Sensor Circuit High.
- Common causes
- Common causes include Faulty Sensor: The transfer case range position sensor itself may be malfunctioning, sending incorrect voltage readings to the vehicle's computer, Wiring Issues: There could be a problem with the wiring harness connecting the sensor to the computer, such as a short circuit or open circuit, Computer Malfunction: The vehicle's computer system may be unable to interpret the data from the sensor correctly, leading to the high voltage reading.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1405 Dodge Description
The C1405 diagnostic trouble code for Dodge vehicles specifically refers to an issue with the Transfer Case Range Position Sensor Circuit being too high. The transfer case range position sensor is responsible for monitoring the position of the transfer case, which is a critical component in 4WD and AWD vehicles. This sensor ensures that the transfer case is in the correct range (such as 2WD, 4WD high, 4WD low) and sends this information to the vehicle's computer system.
Common Causes of C1405 Dodge
- Faulty Sensor: The transfer case range position sensor itself may be malfunctioning, sending incorrect voltage readings to the vehicle's computer.
- Wiring Issues: There could be a problem with the wiring harness connecting the sensor to the computer, such as a short circuit or open circuit.
- Computer Malfunction: The vehicle's computer system may be unable to interpret the data from the sensor correctly, leading to the high voltage reading.
- Corrosion or Contamination: Moisture or debris may have entered the sensor or wiring connections, causing interference with signal transmission.
Symptoms of C1405 Dodge
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Incorrect Transfer Case Operation: The vehicle may experience issues shifting between different drive modes or may get stuck in a particular mode.
- Harsh Shifting: The vehicle may exhibit harsh or erratic shifting patterns due to incorrect data being sent to the transmission.
- Limited Traction Control: The vehicle's traction control system may not function properly, leading to decreased stability and control on slippery or uneven surfaces.
How to Fix C1405 Dodge
- Diagnostic Testing: The first step in addressing this issue is to perform a diagnostic test to pinpoint the exact cause of the high voltage reading. This may involve using a scan tool to read the code and checking the sensor and wiring for any visible damage.
- Sensor Replacement: If the sensor is found to be faulty, it will need to be replaced with a new one. The sensor is typically located on the transfer case and can be accessed by removing the surrounding components.
- Wiring Inspection and Repair: The wiring harness connecting the sensor to the computer should be inspected for any damage or corrosion. Any issues found should be repaired or replaced as needed.
- Computer Reset: After the sensor and wiring have been addressed, the vehicle's computer system may need to be reset to clear the code and ensure that the new sensor is functioning properly.
- Test Drive: Once the repairs have been completed, a test drive should be conducted to ensure that the issue has been resolved and that the vehicle is operating correctly.
Cost to Fix C1405 Dodge
The cost of repairing a Transfer Case Range Position Sensor Circuit High issue can vary depending on the extent of the problem and the specific components that need to be replaced. In general, the cost of a new sensor can range from $50 to $150, while labor costs can range from $100 to $200 depending on the shop's hourly rate and the complexity of the repair. Overall, the total repair cost for this issue could range from $150 to $400. It's important to note that these are rough estimates, and actual costs may vary based on the vehicle's make and model, as well as the location and labor rates of the repair shop.
Need more information about the C1405 Dodge code?
Need more information on how to fix the C1405 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1405 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1405 Dodge Code
1. What are the common symptoms of OBDII code C1405 in a Dodge vehicle?
Common symptoms of OBDII code C1405 include the check engine light illuminating, difficulty shifting gears, and potential issues with the transfer case.
2. What causes the OBDII code C1405 in a Dodge vehicle?
The most common cause of OBDII code C1405 is a malfunction in the transfer case range position sensor circuit, which can be due to wiring issues, sensor failure, or a faulty transfer case control module.
3. How can I diagnose the OBDII code C1405 in my Dodge?
Diagnosing OBDII code C1405 involves using a scan tool to retrieve the trouble code, checking the transfer case range position sensor for proper operation, inspecting the wiring for damage, and testing the transfer case control module.
4. Can I continue driving my Dodge with OBDII code C1405?
It is not recommended to drive your Dodge with OBDII code C1405, as it can lead to further damage to the transfer case and affect the vehicle's drivability.
5. How can I repair OBDII code C1405 in my Dodge?
Repairing OBDII code C1405 typically involves replacing the transfer case range position sensor, repairing any damaged wiring, or replacing the transfer case control module if necessary.
6. Is it possible to reset OBDII code C1405 in a Dodge without fixing the underlying issue?
Resetting OBDII code C1405 without addressing the underlying issue will only temporarily clear the check engine light, and the code is likely to return once the problem persists.
7. Are there any DIY tips for fixing OBDII code C1405 in a Dodge?
While some may attempt to diagnose and repair OBDII code C1405 themselves, it is recommended to seek professional help to ensure the issue is properly identified and resolved.
8. How much does it cost to fix OBDII code C1405 in a Dodge?
The cost to fix OBDII code C1405 in a Dodge can vary depending on the specific cause of the issue, parts needed for repair, and labor costs at the repair shop.
9. Can OBDII code C1405 cause other problems in my Dodge if left unresolved?
If left unresolved, OBDII code C1405 can lead to further damage to the transfer case components, affect the vehicle's drivability, and potentially cause safety issues while driving.
10. Is OBDII code C1405 a common issue in Dodge vehicles?
OBDII code C1405 related to the transfer case range position sensor circuit high is a relatively common issue in Dodge vehicles, especially in models equipped with electronic transfer case controls.
Discuss the causes and fixes for C1405 Dodge OBDII Code
Code C1405 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.