C1403 2013 Toyota RAV4 Code - Rear Speed Sensor Right Malfunction
Quick Answer
The C1403 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 indicates a malfunction in the rear speed sensor on the right side of the vehicle. Common causes include Faulty rear speed sensor, Damaged wiring or connectors, Corrosion or debris affecting sensor operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1403 2013 Toyota RAV4 indicates Rear Speed Sensor Right Malfunction.
- Common causes
- Common causes include Faulty rear speed sensor, Damaged wiring or connectors, Corrosion or debris affecting sensor operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1403 2013 Toyota RAV4 Description
The C1403 diagnostic trouble code (DTC) for a 2013 Toyota RAV4 indicates a malfunction in the rear speed sensor on the right side of the vehicle. The speed sensor is a crucial component of the anti-lock braking system (ABS) and traction control system. It is responsible for monitoring the speed of the wheel and sending this information to the vehicle's electronic control unit (ECU). The ECU uses this data to determine if any wheel is rotating at a different speed than the others, which could indicate wheel slippage or lock-up.
Common Causes of C1403 2013 Toyota RAV4
- Faulty rear speed sensor
- Damaged wiring or connectors
- Corrosion or debris affecting sensor operation
- ABS ECU malfunction
- Wheel speed sensor tone ring damage
Symptoms of C1403 2013 Toyota RAV4
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Inconsistent or erratic braking behavior
- Increased stopping distance
- Loss of stability during braking or acceleration
How to Fix C1403 2013 Toyota RAV4
- Begin by locating the rear speed sensor on the right side of the vehicle.
- Inspect the sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor using a multimeter to determine if it is functioning correctly.
- Replace the rear speed sensor if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix C1403 2013 Toyota RAV4
The typical repair costs for a rear speed sensor right malfunction on a 2013 Toyota RAV4 can range from $150 to $300, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher at dealerships or metropolitan areas and lower at independent shops. It is recommended to inquire about local rates for a more accurate estimate.
Tech Notes for C1403 2013 Toyota RAV4
Need more information about the C1403 2013 Toyota RAV4 code?
Need more information on how to fix the C1403 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1403 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1403 2013 Toyota RAV4 Code
1. What does the OBDII code C1403 mean on a 2013 Toyota RAV4?
C1403 indicates a "Rear Speed Sensor Right Malfunction," meaning the vehicle's system has detected an issue with the right rear wheel speed sensor or its circuit.
2. What are the common symptoms of a C1403 code in a 2013 Toyota RAV4?
Common symptoms include the ABS warning light turning on, traction control being disabled, and inconsistent ABS operation during braking.
3. What causes the C1403 code to appear in a 2013 Toyota RAV4?
Possible causes include a faulty right rear speed sensor, damaged wiring or connectors, debris or damage on the sensor ring, or a failure in the ABS control module.
4. How can I diagnose the C1403 code on my Toyota RAV4?
Start by visually inspecting the right rear speed sensor and its wiring for damage, use a multimeter to test the sensor's resistance, and check for proper voltage signals at the connector.
5. Can I drive my 2013 Toyota RAV4 with a C1403 code?
While the vehicle may still be drivable, the ABS and traction control systems may not work properly, which can affect safety in slippery or emergency braking situations.
6. How do I fix the C1403 code on a 2013 Toyota RAV4?
Repairs may include replacing the faulty right rear speed sensor, repairing damaged wiring, cleaning debris from the sensor ring, or replacing the ABS control module if necessary.
7. How much does it cost to repair a C1403 code on a Toyota RAV4?
The cost can vary, but replacing a wheel speed sensor typically ranges from $150 to $300, including parts and labor. Wiring repairs or ABS module replacement may cost more.
8. Can a dirty sensor cause the C1403 code on a 2013 Toyota RAV4?
Yes, dirt, debris, or rust on the sensor or sensor ring can interfere with signal transmission and trigger the C1403 code.
9. Will clearing the C1403 code with a scan tool fix the problem?
Clearing the code will turn off the warning light temporarily, but if the underlying issue isn’t resolved, the code will reappear.
10. Is the C1403 code covered under warranty for a 2013 Toyota RAV4?
It depends on your vehicle's warranty status. If the powertrain or ABS system is still under warranty, the repair might be covered. Check with your Toyota dealership for details.
Discuss the causes and fixes for C1403 2013 Toyota RAV4 OBDII Code
Code C1403 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.