C1402 2018 Toyota RAV4 Code - Front Speed Sensor Left Malfunction
Quick Answer
The C1402 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 indicates a Front Speed Sensor Left Malfunction. Common causes include Damaged or corroded front left wheel speed sensor, Faulty wiring or connectors related to the speed sensor, Contaminants or debris interfering with the sensor's operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1402 2018 Toyota RAV4 indicates Front Speed Sensor Left Malfunction.
- Common causes
- Common causes include Damaged or corroded front left wheel speed sensor, Faulty wiring or connectors related to the speed sensor, Contaminants or debris interfering with the sensor's operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1402 2018 Toyota RAV4 Description
The C1402 diagnostic trouble code (DTC) for a 2018 Toyota RAV4 indicates a Front Speed Sensor Left Malfunction. This code is specifically related to the front left wheel speed sensor, which is a crucial component of the vehicle's anti-lock braking system (ABS) and traction control system. The speed sensor is responsible for measuring the rotational speed of the wheel and sending this information to the ABS control module. This data is used to determine if a wheel is locking up during braking or losing traction, allowing the ABS system to intervene and prevent skidding.
Common Causes of C1402 2018 Toyota RAV4
- Damaged or corroded front left wheel speed sensor
- Faulty wiring or connectors related to the speed sensor
- Contaminants or debris interfering with the sensor's operation
- Electronic control module (ECM) issues affecting the speed sensor signals
- Physical damage to the front left wheel speed sensor due to road debris or impact
Symptoms of C1402 2018 Toyota RAV4
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Increased stopping distances during braking
- Loss of traction on slippery surfaces
- Unusual noises coming from the front left wheel area
How to Fix C1402 2018 Toyota RAV4
- Diagnose the issue by using a scan tool to retrieve the specific DTC and verify the front left wheel speed sensor malfunction.
- Inspect the front left wheel speed sensor and its wiring for any visible damage, corrosion, or contamination.
- Replace the front left wheel speed sensor if it is found to be faulty, ensuring proper installation and connection.
- Clear the DTC from the vehicle's memory using the scan tool to reset the ABS system.
- Test drive the vehicle to confirm that the ABS warning light is no longer illuminated and that the ABS system functions correctly.
Cost to Fix C1402 2018 Toyota RAV4
The typical repair costs for addressing a Front Speed Sensor Left Malfunction on a 2018 Toyota RAV4 can range from $150 to $300, including parts and labor. However, it is important to note that the actual cost may vary based on factors such as the location of the repair shop, the specific make and model of the vehicle, and the extent of the damage. Additionally, diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. It is recommended to obtain quotes from local repair shops to get a more accurate estimate for this repair.
Tech Notes for C1402 2018 Toyota RAV4
If there is iron powder sticking to the rotor, this will result in a malfunction, so confirm that the rotor is not contaminated with foreign material before replacing the sensor.
Check the speed sensor signal after cleaning or replacement.
On most vehicles, the Front Speed Sensor Rotor is incorporated into the Front Axle Hub Sub-Assembly. If the Speed Sensor Rotor needs to be replaced, replace it together with the Front Axle Hub Sub-Assembly.
Need more information about the C1402 2018 Toyota RAV4 code?
Need more information on how to fix the C1402 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1402 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1402 2018 Toyota RAV4 Code
1. What does the OBDII code C1402 mean on a 2018 Toyota RAV4?
C1402 indicates a malfunction in the front left wheel speed sensor, which is part of the ABS (Anti-lock Braking System).
2. What are the common symptoms of code C1402 in a 2018 Toyota RAV4?
Symptoms may include the ABS warning light turning on, reduced ABS functionality, or loss of traction control.
3. What causes the C1402 code to appear on a Toyota RAV4?
The code is typically caused by a faulty front left wheel speed sensor, damaged sensor wiring, a dirty or damaged tone ring, or a failed ABS control module.
4. Can I drive my 2018 Toyota RAV4 with the C1402 code?
While the vehicle may still be drivable, the ABS and traction control systems may not function properly, increasing the risk of skidding in slippery conditions.
5. How do I diagnose the C1402 code on a Toyota RAV4?
Start by visually inspecting the front left wheel speed sensor and its wiring for damage. Use a multimeter to test the sensor and scan the ABS system with an OBDII scanner to confirm the fault.
6. What is the front left wheel speed sensor, and what does it do?
The wheel speed sensor monitors the rotational speed of the wheel and sends this data to the ABS module to help maintain traction and prevent wheel lock-up.
7. How do I fix the C1402 code on my 2018 Toyota RAV4?
To fix the issue, replace the faulty wheel speed sensor, repair damaged wiring, or clean/replace the tone ring if it’s dirty or broken.
8. How much does it cost to repair a C1402 code on a Toyota RAV4?
The cost to replace a wheel speed sensor typically ranges from $150 to $400, depending on labor rates and parts pricing.
9. Can a dirty tone ring cause a C1402 code?
Yes, dirt, debris, or damage to the tone ring can cause incorrect readings from the speed sensor, triggering the code.
10. Do I need to clear the C1402 code after repairs?
Yes, after completing repairs, use an OBDII scanner to clear the code and verify that it does not return during a test drive.
Discuss the causes and fixes for C1402 2018 Toyota RAV4 OBDII Code
Code C1402 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.