C1314 Scion Code - Short In Main Relay 2 Circuit
Quick Answer
The C1314 diagnostic trouble code (DTC) for Scion vehicles indicates a short in the Main Relay 2 circuit. Common causes include Damaged wiring or connectors in the Main Relay 2 circuit, Faulty main relay, Corrosion in the electrical connectors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1314 Scion indicates Short In Main Relay 2 Circuit.
- Common causes
- Common causes include Damaged wiring or connectors in the Main Relay 2 circuit, Faulty main relay, Corrosion in the electrical connectors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1314 Scion Description
The C1314 diagnostic trouble code (DTC) for Scion vehicles indicates a short in the Main Relay 2 circuit. The main relay is a critical component of the vehicle's electrical system, responsible for supplying power to various systems, including the fuel pump, ignition system, and other essential components. When a short is detected in the Main Relay 2 circuit, it means that there is an abnormal connection or low resistance in the wiring or components associated with this relay.
Common Causes of C1314 Scion
- Damaged wiring or connectors in the Main Relay 2 circuit
- Faulty main relay
- Corrosion in the electrical connectors
- Malfunctioning control module
- Electrical short circuit due to water intrusion or physical damage
Symptoms of C1314 Scion
- Intermittent starting issues
- Engine stalling or hesitation
- Complete engine failure
- Inconsistent electrical system operation
- Check Engine Light illuminated on the dashboard
How to Fix C1314 Scion
- Begin by diagnosing the specific cause of the short in the Main Relay 2 circuit using a diagnostic scanner and multimeter.
- Inspect the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the main relay for proper operation and replace if found to be faulty.
- Check the control module for any malfunctions and address any issues detected.
- Clear the DTC from the vehicle's computer memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix C1314 Scion
The cost of repairing a short in the Main Relay 2 circuit can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair cost for this issue can range from $150 to $500, including parts and labor. However, it's important to note that labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Additionally, the cost may be higher if the main relay or control module needs to be replaced. It's recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model.
Need more information about the C1314 Scion code?
Need more information on how to fix the C1314 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1314 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1314 Scion Code
1. What does the OBDII code C1314 mean in a Scion?
C1314 indicates a short circuit in the Main Relay 2 circuit, which is part of the vehicle’s electronic control system.
2. What are the common symptoms of code C1314 in a Scion?
Symptoms may include the ABS warning light illuminating, possible engine performance issues, and failure of certain electronic components to operate.
3. What causes the C1314 code to appear in a Scion?
Common causes include damaged wiring, a faulty Main Relay 2, a short circuit, or a malfunctioning ABS control module.
4. Can I drive my Scion with the C1314 code?
Driving with this code is not recommended, as it could lead to further electrical issues or compromise safety systems like the ABS.
5. How do you diagnose OBDII code C1314 in a Scion?
Diagnosis involves inspecting the Main Relay 2 circuit for damaged wiring, testing the relay itself, and checking for shorts or open circuits.
6. How can a short in Main Relay 2 circuit be repaired?
Repairs may include replacing damaged wiring, repairing connectors, or replacing the Main Relay 2 if it's found to be faulty.
7. Is the C1314 code related to the ABS system in a Scion?
Yes, the C1314 code can impact the ABS system, as the Main Relay 2 circuit may supply power to components of the ABS control system.
8. How much does it cost to fix the C1314 code in a Scion?
Repair costs depend on the issue, ranging from $50 for simple wiring repairs to $200 or more if the relay or ABS module needs replacing.
9. Can a bad battery cause the C1314 code in a Scion?
While unlikely, a weak or defective battery can sometimes contribute to electrical issues, so it’s worth checking the battery’s condition.
10. Do I need professional help to fix the C1314 code in a Scion?
If you’re experienced with automotive electrical systems, you can attempt repairs, but seeking a professional is recommended for accurate diagnosis and safe repairs.
Discuss the causes and fixes for C1314 Scion OBDII Code
Code C1314 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.