C1255 GMC Code - EBCM Internal Malfunction
Quick Answer
The C1255 GMC code indicates an Electronic Brake Control Module (EBCM) internal malfunction. Common causes include Internal electrical failure within the EBCM, Corrosion or damage to EBCM wiring or connectors, Faulty wheel speed sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1255 GMC indicates EBCM Internal Malfunction.
- Common causes
- Common causes include Internal electrical failure within the EBCM, Corrosion or damage to EBCM wiring or connectors, Faulty wheel speed sensors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1255 GMC Description
The C1255 GMC code indicates an Electronic Brake Control Module (EBCM) internal malfunction. The EBCM is a crucial component of the vehicle's anti-lock braking system (ABS) and traction control system. When this code is triggered, it means that there is a problem within the EBCM itself, affecting its ability to properly control the vehicle's braking and traction systems. This malfunction can lead to compromised safety and performance on the road.
Common Causes of C1255 GMC
- Internal electrical failure within the EBCM
- Corrosion or damage to EBCM wiring or connectors
- Faulty wheel speed sensors
- Water intrusion into the EBCM unit
- Manufacturing defects or component wear over time
Symptoms of C1255 GMC
- Illuminated ABS warning light on the dashboard
- Traction control system malfunction warning
- Erratic ABS activation or pulsation during braking
- Loss of traction control on slippery surfaces
- Increased stopping distance during braking
How to Fix C1255 GMC
- Diagnose the specific cause of the EBCM internal malfunction using a diagnostic scanner to retrieve trouble codes and perform a thorough inspection of the ABS and traction control systems.
- Inspect and test the wheel speed sensors, wiring, and connectors for any damage or corrosion. Replace any faulty components as needed.
- Check for water intrusion into the EBCM unit and address any leaks or seals that may be compromised.
- If the EBCM itself is determined to be faulty, it may need to be repaired or replaced. This process may involve reprogramming the EBCM to ensure compatibility with the vehicle's systems.
- Clear the trouble codes, perform a road test to verify proper ABS and traction control operation, and ensure that the warning lights are no longer illuminated.
Cost to Fix C1255 GMC
The typical repair costs for addressing an EBCM internal malfunction can range from $500 to $1500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary depending on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It is recommended to obtain local estimates for a more accurate cost assessment.
Need more information about the C1255 GMC code?
Need more information on how to fix the C1255 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1255 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1255 GMC Code
1. What does the OBDII code C1255 mean on a GMC vehicle?
C1255 indicates an "EBCM Internal Malfunction," meaning the Electronic Brake Control Module (EBCM) has detected an internal error in its circuitry or processing.
2. What are the common symptoms of code C1255 on a GMC?
Symptoms may include an illuminated ABS warning light, traction control light, reduced braking performance, or loss of ABS functionality.
3. What causes the C1255 code on a GMC?
Common causes include a faulty EBCM, wiring issues such as damaged or corroded connectors, or a software glitch in the module.
4. Can I still drive my GMC with a C1255 code?
Yes, the vehicle can typically still be driven, but the ABS and traction control systems may not function properly, increasing the risk of wheel lock-up during hard braking.
5. How can I diagnose the C1255 code on a GMC?
Use an OBDII scanner to confirm the code and check live data. Inspect the EBCM wiring harness and connectors for damage or corrosion, and test the module's power and ground circuits.
6. Does clearing the C1255 code fix the problem?
Clearing the code may turn off the warning light temporarily, but if the underlying issue isn't resolved, the code will likely return.
7. How much does it cost to repair a C1255 code on a GMC?
Repair costs can vary widely, typically ranging from $150 to $1,200, depending on whether the issue is a wiring repair or an EBCM replacement.
8. Can a C1255 code be caused by a low battery?
Yes, a low or weak battery can sometimes cause the EBCM to malfunction, triggering the C1255 code. Ensure the battery is fully charged and in good condition.
9. How do I reset the C1255 code on a GMC?
After repairing the issue, use an OBDII scanner to clear the code. If the problem persists, the code will reappear.
10. Is replacing the EBCM the only solution for a C1255 code?
Not always. In some cases, the issue can be resolved by repairing wiring, cleaning corroded connectors, or updating the module’s software. Replacing the EBCM is a last resort.
Discuss the causes and fixes for C1255 GMC OBDII Code
Code C1255 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.