C1235 Ford Code - Right Rear Wheel Speed Sensor Input Signal Missing
Quick Answer
The C1235 Ford code indicates that the right rear wheel speed sensor input signal is missing. Common causes include Faulty wheel speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's functionality. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1235 Ford indicates Right Rear Wheel Speed Sensor Input Signal Missing.
- Common causes
- Common causes include Faulty wheel speed sensor, Damaged wiring or connectors leading to the sensor, Corrosion or debris affecting the sensor's functionality.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C1235 Ford Description
The C1235 Ford code indicates that the right rear wheel speed sensor input signal is missing. This means that the vehicle's electronic stability control system is unable to monitor the speed of the right rear wheel, which can lead to issues with the vehicle's traction control, ABS system, and overall stability while driving. The wheel speed sensors play a crucial role in providing data to the vehicle's computer system, allowing it to adjust braking and acceleration to maintain control in various driving conditions. If this code is not addressed, it can result in decreased safety, compromised handling, and potential loss of control while driving.
Common Causes of C1235 Ford
- Faulty wheel speed sensor
- Damaged wiring or connectors leading to the sensor
- Corrosion or debris affecting the sensor's functionality
- Electronic control module (ECM) failure
- Suspension or wheel bearing issues impacting sensor alignment
Symptoms of C1235 Ford
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Inconsistent or erratic braking behavior
- Vehicle stability issues, especially during turns or on slippery surfaces
- Reduced fuel efficiency due to compromised system performance
How to Fix C1235 Ford
- Start by diagnosing the specific wheel speed sensor causing the issue using a diagnostic scanner.
- Inspect the sensor, wiring, and connectors for damage, corrosion, or debris, and repair or replace as necessary.
- Reset the fault codes and test drive the vehicle to confirm that the issue has been resolved.
- If the problem persists, consider checking the ECM and other related components for potential faults.
- Calibrate the wheel speed sensor and ensure proper alignment for accurate readings.
Cost to Fix C1235 Ford
The typical repair costs for addressing a right rear wheel speed sensor input signal missing code can range from $100 to $300, including parts and labor. However, actual costs may vary depending on the specific vehicle make and model, the location of the repair shop, and the extent of the issue. It's recommended to consult with a professional mechanic for a more accurate estimate based on your individual circumstances.
Tech Notes for C1235 Ford
2002-2004 Ford Explorer Factory Service Bulletin OBDII Code C1235
User Submitted Video
Need more information about the C1235 Ford code?
Need more information on how to fix the C1235 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1235 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1235 Ford Code
1. What are the common symptoms of OBDII code C1235 in a Ford indicating a Right Rear Wheel Speed Sensor Input Signal Missing?
- Common symptoms include the ABS warning light illuminating on the dashboard, traction control system malfunctions, and potential loss of stability control.
2. What could cause the Right Rear Wheel Speed Sensor Input Signal Missing code (C1235) in a Ford vehicle?
- Possible causes include a faulty right rear wheel speed sensor, damaged or disconnected wiring to the sensor, or problems with the ABS module.
3. How can I troubleshoot the Right Rear Wheel Speed Sensor Input Signal Missing code (C1235) in my Ford?
- Start by visually inspecting the right rear wheel speed sensor and its wiring for any damage or loose connections. You can also use a multimeter to test the sensor's resistance and check for proper voltage signals.
4. Can a dirty or contaminated wheel speed sensor cause the C1235 code in a Ford?
- Yes, dirt, debris, or metal shavings accumulation on the right rear wheel speed sensor can disrupt its signal and trigger the C1235 error code.
5. Is it safe to continue driving with the C1235 code related to a missing right rear wheel speed sensor input signal in a Ford?
- It is not recommended to drive the vehicle with this code present, as it can affect the proper functioning of the ABS and traction control systems, potentially compromising safety.
6. How do I reset the C1235 code after repairing the right rear wheel speed sensor issue in my Ford?
- Once the underlying issue causing the code is fixed, you can reset the OBDII code by using a diagnostic scanner or disconnecting the vehicle's battery for a few minutes.
7. Do I need specialized tools to replace the right rear wheel speed sensor in my Ford to resolve the C1235 code?
- Depending on the vehicle model, replacing the right rear wheel speed sensor may require basic hand tools, such as sockets and wrenches, and possibly a jack and jack stands for lifting the vehicle.
8. Can extreme weather conditions affect the right rear wheel speed sensor and trigger the C1235 code in a Ford?
- Yes, extreme cold or hot temperatures, as well as moisture or corrosion, can impact the performance of the wheel speed sensor and lead to the C1235 error code.
9. Are there any DIY tips for preventing the recurrence of the C1235 code in a Ford after repairing the right rear wheel speed sensor issue?
- Ensuring proper installation and securing of the new sensor, as well as regular maintenance to keep the sensor and its surroundings clean, can help prevent the code from reappearing.
10. Should I seek professional help for diagnosing and repairing the C1235 code related to the right rear wheel speed sensor input signal missing in my Ford?
- If you are unsure about diagnosing or repairing the issue yourself, it is advisable to consult a qualified mechanic or dealership with experience in ABS and traction control systems for accurate diagnosis and repairs.
Discuss the causes and fixes for C1235 Ford OBDII Code
-
2008 Ford Explorer, receiving code for right rear wheel speed sensor. ABS light on and not able to use traction control switch. Flashing Red light on Dash every 5 min with chime. I have replaced the sensor and cleaned the hub, checking for cracks etc but still no help eliminating code. any suggestions on where to look next?
-
What model and year is your vehicle? have you clean the hub gear and check the wires from the sensor to the control unit?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.