Engine-Codes
 
OBDII Code List
 
C1112 HYUNDAI

C1112 HYUNDAI - Sensor Source Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

C1112 Hyundai Possible Causes

  • Faulty Torque Sensor
  • Torque Sensor harness is open or shorted
  • Torque Sensor circuit poor electrical connection

Cost of diagnosing the C1112 Hyundai code

    Labor: 1.0

    The cost of diagnosing the C1112 Hyundai code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

C1112 Hyundai Possible Symptoms

  • Anti-Lock Brake System (ABS) Warning Light ON
  • Engine Light ON (or Service Engine Soon Warning Light)

C1112 Hyundai Meaning

A torque sensor, installed in the middle of steering column, is one unit composed of a main sensor and sub sensor. When the steering wheel is turned, the torsion bar is twisted in proportion to load of the wheel, and the assembled shaft turns as well. At this moment, due to twist of shaft, a change in the magnetic field is generated in main sensor coil surrounds the shaft and in the sub-sensor coil which is inside torque sensor. The change in current produced by this process is input to the EPS CM. With a change of input sensor signal current, EPS CM determines driver's steering direction then, comparing current differences between the two sensors, the EPS CM determines whether main sensor is open/short. The Torque sensor can be damaged during disassembly of the sensor. You must disassemble or remove the sensor when removing or replacing the assembly.
OBDII Code C1112 Hyundai - Sensor Source Voltage - Engine-Codes.com

Related Information