C1023 SUZUKI Code - Yaw Rate Sensor Signal Is Out Of Range
|C1023 SUZUKI code possible causes
- Faulty Yaw Rate Sensor
- Yaw Rate Sensor harness is open or shorted
- Yaw Rate Sensor circuit poor electrical connection
|How is the C1023 SUZUKI code repair?
Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|C1023 SUZUKI code tech notes
For 4WD vehicles, this Diagnostic Trouble Code (DTC) may be set when a vehicle is lifted up and its wheel(s) is turned. In such case, clear the DTC and check again.
|What is the cost to diagnose the C1023 SUZUKI code
The cost to diagnose the C1023 SUZUKI code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are C1023 SUZUKI code possible symptoms?
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
|What is C1023 SUZUKI code meaning?
The Anti-Lock Brake System (ABS) Module monitors the Yaw Rate Sensor. If the signal voltage of G sensor while at a stop does not vary from that while running, this Diagnostic Trouble Code (DTC) is set.