C0760 2018 Chevrolet Silverado Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The C0760 diagnostic trouble code (DTC) specifically refers to the left rear low tire pressure sensor on a 2018 Chevrolet Silverado. Common causes include Faulty left rear low tire pressure sensor, Wiring or connection issues related to the sensor, Low tire pressure in the left rear tire. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 2018 Chevrolet Silverado indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Faulty left rear low tire pressure sensor, Wiring or connection issues related to the sensor, Low tire pressure in the left rear tire.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0760 2018 Chevrolet Silverado Description
The C0760 diagnostic trouble code (DTC) specifically refers to the left rear low tire pressure sensor on a 2018 Chevrolet Silverado. This code indicates that there is an issue with the tire pressure monitoring system (TPMS) sensor located on the left rear wheel of the vehicle. The TPMS is a crucial safety feature that monitors the air pressure in each tire and alerts the driver if there is a significant drop in pressure, which could lead to decreased fuel efficiency, poor handling, and increased risk of a blowout.
Common Causes of C0760 2018 Chevrolet Silverado
- Faulty left rear low tire pressure sensor
- Wiring or connection issues related to the sensor
- Low tire pressure in the left rear tire
- Corrosion or damage to the sensor or its components
- Electronic control module (ECM) malfunction
Symptoms of C0760 2018 Chevrolet Silverado
- TPMS warning light illuminated on the dashboard
- Inaccurate tire pressure readings displayed on the instrument cluster
- Decreased fuel efficiency
- Uneven tire wear
- Poor handling or stability while driving
How to Fix C0760 2018 Chevrolet Silverado
- Begin by visually inspecting the left rear tire for any signs of damage or low pressure. Inflate the tire to the manufacturer's recommended pressure if necessary.
- Check the wiring and connections related to the left rear low tire pressure sensor for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
- Use a TPMS diagnostic tool to reset the sensor and clear the DTC from the vehicle's computer system.
- If the sensor itself is faulty, it may need to be replaced. This typically involves removing the wheel to access the sensor and installing a new one.
- After completing the repair, perform a TPMS relearn procedure to ensure that the sensor is functioning correctly and transmitting accurate tire pressure readings.
Cost to Fix C0760 2018 Chevrolet Silverado
The cost of repairing a left rear low tire pressure sensor on a 2018 Chevrolet Silverado can vary depending on the specific cause of the issue and whether any parts need to be replaced. In general, the cost of replacing a TPMS sensor can range from $50 to $200 per sensor, depending on the brand and quality of the part. Labor costs for this type of repair typically range from $50 to $150 per hour, with the total repair time usually taking around 1-2 hours.
Tech Notes for C0760 2018 Chevrolet Silverado
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
Need more information about the C0760 2018 Chevrolet Silverado code?
Need more information on how to fix the C0760 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 2018 Chevrolet Silverado Code
1. What does the OBDII code C0760 mean on a 2018 Chevrolet Silverado?
The code C0760 indicates an issue with the left rear tire pressure sensor, specifically low tire pressure or a sensor malfunction.
2. What are the common symptoms of code C0760?
Symptoms include a low tire pressure warning light on the dashboard, inaccurate tire pressure readings, or no reading for the left rear tire.
3. What causes the C0760 code to appear?
It can be caused by low tire pressure, a faulty tire pressure sensor, damaged wiring, or interference affecting the tire pressure monitoring system (TPMS).
4. How can I fix the C0760 code on my Silverado?
Start by checking and inflating the left rear tire to the recommended pressure. If the issue persists, inspect the sensor and wiring, or replace the faulty tire pressure sensor.
5. Can I drive my Silverado with the C0760 code active?
Yes, but it’s not recommended for long distances, as it may indicate a potentially hazardous low tire pressure situation.
6. How do I reset the TPMS after addressing the C0760 code?
Use the TPMS reset procedure in your owner’s manual, which typically involves cycling the ignition and using a TPMS relearn tool or the infotainment system.
7. How much does it cost to replace a faulty tire pressure sensor?
Replacing a TPMS sensor can cost between $50 and $150 per sensor, depending on labor and parts.
8. What tools are needed to diagnose the C0760 code?
A TPMS scan tool and an OBDII scanner are helpful for diagnosing the issue and verifying the fault code.
9. Can the C0760 code be triggered by temperature changes?
Yes, extreme cold or heat can temporarily lower tire pressure, triggering the code. Always check tire pressure before replacing any parts.
10. Is a sensor recalibration required after fixing the C0760 code?
Yes, after replacing or repairing the sensor, recalibration or a TPMS relearn process is typically required to sync the new sensor with the vehicle.
Discuss the causes and fixes for C0760 2018 Chevrolet Silverado OBDII Code
Code C0760 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.