C0760 2014 GMC Sierra Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The C0760 code indicates a fault with the left rear tire pressure sensor in a 2014 GMC Sierra. Common causes include Faulty Tire Pressure Sensor: The sensor itself may be malfunctioning due to internal failure or battery depletion, Damaged Tire or Rim: Physical damage to the tire or rim can lead to air leaks, causing low tire pressure, Wiring Issues: Damaged or corroded wiring connecting the sensor to the vehicle's computer can disrupt communication. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 2014 GMC Sierra indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Faulty Tire Pressure Sensor: The sensor itself may be malfunctioning due to internal failure or battery depletion, Damaged Tire or Rim: Physical damage to the tire or rim can lead to air leaks, causing low tire pressure, Wiring Issues: Damaged or corroded wiring connecting the sensor to the vehicle's computer can disrupt communication.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0760 2014 GMC Sierra Description
The C0760 code indicates a fault with the left rear tire pressure sensor in a 2014 GMC Sierra. This code is part of the vehicle's Tire Pressure Monitoring System (TPMS), which is designed to monitor the air pressure in each tire and alert the driver when pressure drops below a certain threshold. When the left rear tire pressure sensor fails or reports low pressure, the vehicle's onboard diagnostic system triggers this code.
Common Causes of C0760 2014 GMC Sierra
- Faulty Tire Pressure Sensor: The sensor itself may be malfunctioning due to internal failure or battery depletion.
- Damaged Tire or Rim: Physical damage to the tire or rim can lead to air leaks, causing low tire pressure.
- Wiring Issues: Damaged or corroded wiring connecting the sensor to the vehicle's computer can disrupt communication.
- Improper Installation: If the tire was recently changed or serviced, the sensor may not have been properly installed or calibrated.
- Environmental Factors: Extreme temperatures can affect tire pressure and sensor performance, leading to erroneous readings.
Symptoms of C0760 2014 GMC Sierra
- TPMS Warning Light: The dashboard warning light for low tire pressure will illuminate, indicating a potential issue with one or more tire sensors.
- Inaccurate Tire Pressure Readings: The driver may notice discrepancies in the displayed tire pressure for the left rear tire compared to actual measurements.
- Poor Handling: The vehicle may exhibit handling issues, such as drifting or pulling to one side, particularly during turns.
- Increased Tire Wear: Visual inspection may reveal uneven tire wear patterns, especially on the left rear tire.
- Decreased Fuel Efficiency: A noticeable drop in fuel economy may occur due to increased rolling resistance from under-inflated tires.
How to Fix C0760 2014 GMC Sierra
- Visual Inspection: Begin with a thorough visual inspection of the left rear tire and sensor for any obvious signs of damage or wear.
- Check Tire Pressure: Verify the actual tire pressure using a manual gauge to determine if it is indeed low or if the sensor is malfunctioning.
- Replace Sensor: If the sensor is confirmed to be faulty, replace it with a new tire pressure sensor compatible with the 2014 GMC Sierra.
- Reprogram TPMS: After replacing the sensor, the TPMS may need to be reprogrammed or reset to ensure it recognizes the new sensor and displays accurate readings.
- Test Drive: Conduct a test drive to confirm that the TPMS warning light has turned off and that the system is functioning correctly.
Cost to Fix C0760 2014 GMC Sierra
** The typical repair costs for addressing a C0760 code can vary widely based on several factors, including parts, labor, and location. On average, replacing a tire pressure sensor can cost between $100 and $200, including parts and labor. Labor rates typically range from $80 to $150 per hour, depending on the shop's location and type. In metropolitan areas or at dealerships, rates may be higher, while independent shops often charge less. Additionally, if further diagnostics or repairs are needed (such as wiring repairs or tire replacement), costs can increase. It's advisable to consult local repair shops for a more precise estimate tailored to your specific vehicle and situation.
Tech Notes for C0760 2014 GMC Sierra
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
Need more information about the C0760 2014 GMC Sierra code?
Need more information on how to fix the C0760 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 2014 GMC Sierra Code
1. What does the OBDII code C0760 mean on a 2014 GMC Sierra?
C0760 indicates an issue with the left rear tire pressure sensor, typically related to low tire pressure or a malfunctioning sensor.
2. What are the common symptoms of code C0760 on a 2014 GMC Sierra?
Common symptoms include the tire pressure warning light illuminating, inaccurate tire pressure readings, or no data displayed for the left rear tire.
3. What causes the C0760 code to appear on a 2014 GMC Sierra?
The most common causes are low tire pressure, a faulty tire pressure sensor, damaged sensor wiring, or interference with the sensor signal.
4. How do I fix the C0760 code on my 2014 GMC Sierra?
Start by checking the left rear tire pressure and inflating it to the recommended level. If the issue persists, inspect or replace the tire pressure sensor.
5. Can driving with the C0760 code damage my 2014 GMC Sierra?
While the code itself won’t damage the vehicle, ignoring it could lead to driving on improperly inflated tires, which can cause uneven tire wear or reduced fuel efficiency.
6. How do I reset the tire pressure monitoring system after fixing the C0760 code?
After inflating the tire or replacing the sensor, use a TPMS reset tool or follow the owner's manual instructions to recalibrate the system.
7. How much does it cost to repair a faulty tire pressure sensor on a 2014 GMC Sierra?
Replacing a single tire pressure sensor typically costs between $50 and $150, depending on parts and labor.
8. Can I ignore the C0760 code if my tire pressure looks fine?
No, because the sensor may still be malfunctioning, leading to inaccurate tire pressure monitoring, which is crucial for safety.
9. How can I test if the left rear tire pressure sensor is working?
You can use a TPMS diagnostic tool to check the sensor's signal and battery status or have a professional inspect it.
10. Is the C0760 code unique to the left rear tire on a 2014 GMC Sierra?
Yes, it specifically refers to the left rear tire pressure sensor. Other tires have different codes for similar issues.
Discuss the causes and fixes for C0760 2014 GMC Sierra OBDII Code
Code C0760 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.