C0760 2014 Chevrolet Silverado Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The C0760 diagnostic trouble code for a 2014 Chevrolet Silverado specifically refers to the Left Rear Low Tire Pressure Sensor. Common causes include Faulty tire pressure sensor in the left rear wheel, Low tire pressure due to a puncture or leak in the tire, Corrosion or damage to the sensor or its components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 2014 Chevrolet Silverado indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Faulty tire pressure sensor in the left rear wheel, Low tire pressure due to a puncture or leak in the tire, Corrosion or damage to the sensor or its components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0760 2014 Chevrolet Silverado Description
The C0760 diagnostic trouble code for a 2014 Chevrolet Silverado specifically refers to the Left Rear Low Tire Pressure Sensor. This code indicates that there is an issue with the tire pressure sensor located on the left rear wheel of the vehicle. The tire pressure sensor is responsible for monitoring the air pressure in the tire and transmitting this information to the vehicle's onboard computer system. When the sensor detects low tire pressure in the left rear tire, it triggers the C0760 code.
Common Causes of C0760 2014 Chevrolet Silverado
- Faulty tire pressure sensor in the left rear wheel
- Low tire pressure due to a puncture or leak in the tire
- Corrosion or damage to the sensor or its components
- Electrical issues in the TPMS system
- Incorrect tire pressure calibration
Symptoms of C0760 2014 Chevrolet Silverado
- TPMS warning light illuminated on the dashboard
- Low tire pressure in the left rear tire
- Decreased fuel efficiency
- Uneven tire wear
- Poor handling or stability while driving
How to Fix C0760 2014 Chevrolet Silverado
- Begin by visually inspecting the left rear tire for any visible damage or signs of low pressure.
- Use a tire pressure gauge to check the actual pressure in the left rear tire and compare it to the manufacturer's recommended pressure.
- If the tire pressure is low, inflate the tire to the correct pressure and monitor for any further loss of pressure.
- If the tire pressure is normal, inspect the tire pressure sensor and its components for any damage or corrosion. Replace the sensor if necessary.
- Clear the C0760 code from the vehicle's computer system using a diagnostic scanner to reset the TPMS.
Cost to Fix C0760 2014 Chevrolet Silverado
The cost of repairing a Left Rear Low Tire Pressure Sensor issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, replacing a faulty tire pressure sensor can cost between $50 and $200, including parts and labor. Additional costs may apply if there are other underlying issues contributing to the low tire pressure. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that diagnostic time and labor rates can vary, so it's advisable to research local rates for a more precise cost estimate.
Tech Notes for C0760 2014 Chevrolet Silverado
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
Need more information about the C0760 2014 Chevrolet Silverado code?
Need more information on how to fix the C0760 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 2014 Chevrolet Silverado Code
1. What does the OBDII code C0760 mean on a 2014 Chevrolet Silverado?
The code C0760 indicates an issue with the left rear tire pressure sensor, typically involving low tire pressure or a fault in the sensor itself.
2. What are the common symptoms of code C0760 in a 2014 Chevy Silverado?
Symptoms include a tire pressure warning light on the dashboard, inaccurate tire pressure readings, or no reading from the left rear tire.
3. What causes code C0760 in the 2014 Chevrolet Silverado?
Common causes include an actual low tire pressure, a faulty tire pressure sensor, damaged wiring, or interference with the sensor signal.
4. How do I fix the C0760 code on my 2014 Chevy Silverado?
First, check and inflate the left rear tire to the recommended pressure. If the issue persists, inspect or replace the tire pressure sensor and check the wiring connections.
5. Can I drive my 2014 Silverado with a C0760 code active?
Yes, but it's not recommended for long periods, as incorrect tire pressure can affect handling, fuel efficiency, and tire longevity.
6. How do I reset the tire pressure monitoring system (TPMS) after fixing C0760?
After inflating all tires to the correct pressure, use the TPMS reset tool or follow the TPMS relearn procedure in your Silverado's owner's manual.
7. How much does it cost to replace a faulty tire pressure sensor in a 2014 Chevrolet Silverado?
The cost of replacing a tire pressure sensor typically ranges from $50 to $150 per sensor, depending on labor and parts.
8. Can bad weather or cold temperatures trigger the C0760 code?
Yes, cold weather can lower tire pressure, potentially triggering the code. Check and adjust tire pressure during temperature changes.
9. How can I check if the left rear tire pressure sensor is faulty?
Use an OBDII scanner with TPMS functionality to test the sensor's signal or consult a mechanic for diagnosis.
10. What is the recommended tire pressure for a 2014 Chevrolet Silverado?
The recommended tire pressure is usually listed on a sticker inside the driver's doorframe and is typically around 35 PSI, but check your specific model for accuracy.
Discuss the causes and fixes for C0760 2014 Chevrolet Silverado OBDII Code
Code C0760 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.