C0760:29 Code - Left Rear Low Tire Pressure Sensor Too Few Pulses
Quick Answer
The C0760:29 diagnostic trouble code indicates that the left rear tire pressure sensor is not sending enough pulses to the vehicle's electronic control unit (ECU). Common causes include Faulty left rear tire pressure sensor, Corroded or damaged wiring connecting the sensor to the ECU, ECU malfunction affecting sensor communication. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760:29 indicates Left Rear Low Tire Pressure Sensor Too Few Pulses.
- Common causes
- Common causes include Faulty left rear tire pressure sensor, Corroded or damaged wiring connecting the sensor to the ECU, ECU malfunction affecting sensor communication.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0760:29 Description
The C0760:29 diagnostic trouble code indicates that the left rear tire pressure sensor is not sending enough pulses to the vehicle's electronic control unit (ECU). This sensor is responsible for monitoring the tire pressure in real-time and transmitting this data to the ECU. When the sensor fails to send an adequate number of pulses, it can lead to inaccurate tire pressure readings being displayed on the dashboard or even a complete loss of tire pressure monitoring functionality.
Common Causes of C0760:29
- Faulty left rear tire pressure sensor.
- Corroded or damaged wiring connecting the sensor to the ECU.
- ECU malfunction affecting sensor communication.
- Low battery voltage affecting sensor operation.
- Physical damage to the sensor from road debris or impact.
Symptoms of C0760:29
- Tire pressure warning light illuminated on the dashboard.
- Inaccurate tire pressure readings displayed on the instrument cluster.
- Loss of tire pressure monitoring system functionality.
- Uneven tire wear on the left rear tire.
- Decreased fuel efficiency due to underinflated tire.
How to Fix C0760:29
- Begin by visually inspecting the left rear tire pressure sensor and its wiring for any visible damage or corrosion.
- Use a diagnostic tool to read the specific error codes and confirm that the issue is related to the sensor's pulse count.
- Replace the left rear tire pressure sensor if it is found to be faulty or not sending enough pulses.
- Check and repair any damaged wiring or connections between the sensor and the ECU.
- Reset the ECU and recalibrate the tire pressure monitoring system to ensure accurate readings.
Cost to Fix C0760:29
The typical repair costs for addressing a left rear low tire pressure sensor issue can vary depending on the specific cause of the problem and the vehicle's make and model. In general, replacing a tire pressure sensor can cost between $50 to $200 per sensor, including parts and labor. Additional costs may apply if wiring repairs or ECU diagnostics are necessary. It's advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on the individual circumstances of the vehicle. Keep in mind that labor rates can vary, with hourly rates typically ranging from $80 to $150, so it's recommended to inquire about local rates for a precise cost estimate.
Tech Notes for C0760:29
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
Need more information about the C0760:29 code?
Need more information on how to fix the C0760:29 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760:29 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760:29 Code
No Frequently Asked Questions about C0760:29 Code found.
Discuss the causes and fixes for C0760:29 OBDII Code
Code C0760:29 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.