Engine-Codes.com
Engine-Codes – Chevrolet – C0710 2015 Chevrolet Silverado

C0710 2015 Chevrolet Silverado Code - Steering Position Signal

Quick Answer

The C0710 code in a 2015 Chevrolet Silverado indicates an issue with the Steering Position Signal, which is critical for the proper functioning of the vehicle's steering system. Common causes include Faulty Steering Angle Sensor: The sensor itself may be defective, leading to inaccurate readings, Wiring Issues: Damaged or corroded wiring in the steering system can disrupt signal transmission, Software Glitches: The vehicle's control modules may require software updates or recalibration. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0710 2015 Chevrolet Silverado indicates Steering Position Signal.
Common causes
Common causes include Faulty Steering Angle Sensor: The sensor itself may be defective, leading to inaccurate readings, Wiring Issues: Damaged or corroded wiring in the steering system can disrupt signal transmission, Software Glitches: The vehicle's control modules may require software updates or recalibration.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 18, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code C0710 2015 Chevrolet Silverado Description

The C0710 code in a 2015 Chevrolet Silverado indicates an issue with the Steering Position Signal, which is critical for the proper functioning of the vehicle's steering system. This code is triggered when the Engine Control Module (ECM) detects an inconsistency or malfunction in the signals received from the steering angle sensor. The steering angle sensor is responsible for measuring the angle of the steering wheel and sending this information to the vehicle's electronic control systems, including the power steering system and stability control systems.

OBDII Code C0710 2015 Chevrolet Silverado - Steering Position Signal
C0710 2015 Chevrolet Silverado Code - Steering Position Signal

Common Causes of C0710 2015 Chevrolet Silverado

  1. Faulty Steering Angle Sensor: The sensor itself may be defective, leading to inaccurate readings.
  2. Wiring Issues: Damaged or corroded wiring in the steering system can disrupt signal transmission.
  3. Software Glitches: The vehicle's control modules may require software updates or recalibration.
  4. Mechanical Damage: Physical damage to the steering column or related components can affect sensor performance.
  5. Electrical Interference: Issues such as poor grounding or interference from other electrical systems can impact the sensor's operation.

Symptoms of C0710 2015 Chevrolet Silverado

  1. Steering Wheel Warning Light: The dashboard may display a warning light indicating a problem with the steering system.
  2. Unresponsive Steering: The steering may feel loose or unresponsive, making it difficult to control the vehicle.
  3. Erratic Steering Behavior: The vehicle may exhibit unpredictable steering responses, particularly during turns.
  4. Stability Control Malfunction: The stability control system may engage unexpectedly or fail to activate when needed.
  5. Difficulty in Maneuvering: Drivers may experience challenges when attempting to maneuver the vehicle in tight spaces or during parking.

How to Fix C0710 2015 Chevrolet Silverado

  1. Diagnostic Scan: Begin by using an OBD-II scanner to confirm the C0710 code and check for any additional codes that may provide further insight.
  2. Inspect Wiring and Connectors: Examine the wiring harness and connectors associated with the steering angle sensor for signs of damage, corrosion, or loose connections.
  3. Test the Steering Angle Sensor: Use a multimeter to test the sensor's output and ensure it is functioning within the manufacturer's specifications.
  4. Replace Faulty Components: If the sensor is found to be defective, replace it with a new one. Repair any damaged wiring or connectors as needed.
  5. Recalibrate the System: After repairs, recalibrate the steering angle sensor using a diagnostic tool to ensure accurate readings and proper integration with the vehicle's control systems.

Cost to Fix C0710 2015 Chevrolet Silverado

The typical repair costs for addressing a C0710 code can range from $200 to $600, depending on the specific issue and the components that need to be replaced. This estimate includes parts such as a new steering angle sensor, which can cost between $100 and $300, and labor costs that can vary significantly. Labor rates at auto repair shops generally range from $80 to $150 per hour. Factors such as location, vehicle make and model, and engine type can influence the final cost. In metropolitan areas or at dealerships, rates may be higher, while independent shops often offer more competitive pricing. For a precise estimate, it's advisable to check local rates and obtain quotes from multiple repair shops.

What does this mean?

Tech Notes for C0710 2015 Chevrolet Silverado

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.



Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.



C0710:09 Steering Position Signal Too Fast Transitions

C0710:0A Steering Position Signal Too Slow Transitions

C0710:11 Steering Position Signal High Input

C0710:18 Steering Position Signal Low Signal Amplitude

C0710:19 Steering Position Signal High Signal Amplitude

C0710:42 Steering Position Signal Calibration Not Programmed

C0710:4B Steering Position Signal Calibration Not Learned

C0710:5A Steering Position Signal Not Plausible

C0710:71 Steering Position Signal Invalid Data

Need more information about the C0710 2015 Chevrolet Silverado code?

Need more information on how to fix the C0710 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 2015 Chevrolet Silverado Code

1. What does OBDII code C0710 mean on a 2015 Chevrolet Silverado?

Code C0710 indicates a problem with the steering position sensor signal, which is essential for systems like electronic power steering and stability control.

2. What are the symptoms of code C0710 in a 2015 Chevrolet Silverado?

Common symptoms include a warning light on the dashboard, such as the Service Stabilitrak or Service Power Steering message, and possible issues with steering assist or stability control performance.

3. What causes code C0710 on a 2015 Chevrolet Silverado?

Potential causes include a faulty steering position sensor, damaged wiring or connectors, or a failure in the electronic control module (ECM) or related components.

4. Can I drive my 2015 Chevrolet Silverado with code C0710?

While the vehicle may still be drivable, you may experience reduced steering assist or compromised stability control, making it less safe to drive. It’s best to address the issue promptly.

5. How do I fix code C0710 on a 2015 Chevrolet Silverado?

Repairing code C0710 typically involves inspecting and repairing any damaged wiring or connectors, recalibrating the steering position sensor, or replacing the sensor if it is faulty.

6. How is the steering position sensor tested for code C0710?

A technician will use a scan tool to check the sensor's data readings and verify its output. They may also test wiring continuity and inspect for corrosion or loose connections.

7. Does code C0710 require steering system recalibration?

Yes, after replacing or repairing the steering position sensor, recalibration using a diagnostic tool is often required to ensure accurate signal communication.

8. Is a faulty steering position sensor the only possible cause of code C0710?

No, other causes such as damaged wiring, connector issues, or a malfunctioning control module can also trigger this code.

9. How much does it cost to repair code C0710 on a 2015 Chevrolet Silverado?

The repair cost depends on the cause. Replacing a steering position sensor typically costs $150-$300, including parts and labor, while simpler fixes like repairing wiring may cost less.

10. Can a weak battery cause code C0710 in a 2015 Chevrolet Silverado?

Yes, a weak or failing battery can potentially cause electrical issues, including erratic sensor signals, which may trigger the C0710 code. Always check the battery and charging system as part of the diagnosis.

Discuss the causes and fixes for C0710 2015 Chevrolet Silverado OBDII Code

Submit a New Comment

Code C0710 2015 Chevrolet Silverado comments

No comments found for this page.