Engine-Codes.com
Engine-Codes – Generic – C0710:5A

C0710:5A Code - Steering Position Signal Not Plausible

Quick Answer

The C0710:5A diagnostic trouble code indicates that the steering position signal is not plausible. Common causes include Faulty steering position sensor, Damaged wiring or connectors related to the steering position sensor, Issues with the control module receiving the steering position signal. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0710:5A indicates Steering Position Signal Not Plausible.
Common causes
Common causes include Faulty steering position sensor, Damaged wiring or connectors related to the steering position sensor, Issues with the control module receiving the steering position signal.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 15, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code C0710:5A Description

The C0710:5A diagnostic trouble code indicates that the steering position signal is not plausible. This means that the signal being sent by the steering position sensor is not aligning with the expected values, leading to a discrepancy in the data being received by the vehicle's control module. The steering position sensor is a crucial component that helps the vehicle's electronic stability control system and other safety features function properly. When this signal is not plausible, it can affect the vehicle's performance, handling, and overall safety.

OBDII Code C0710:5A - Steering Position Signal Not Plausible
C0710:5A Code - Steering Position Signal Not Plausible

Common Causes of C0710:5A

  1. Faulty steering position sensor
  2. Damaged wiring or connectors related to the steering position sensor
  3. Issues with the control module receiving the steering position signal
  4. Corrosion or contamination affecting the sensor's performance
  5. Electrical interference disrupting the signal transmission

Symptoms of C0710:5A

  1. Erratic steering behavior
  2. Electronic stability control warning light illuminated on the dashboard
  3. Loss of power steering assistance
  4. Inaccurate steering wheel position displayed on the instrument cluster
  5. Vehicle pulling to one side while driving

How to Fix C0710:5A

  1. Diagnose the issue by using a scan tool to retrieve the trouble code and perform a thorough inspection of the steering position sensor, wiring, and related components.
  2. Replace the faulty steering position sensor if it is determined to be the root cause of the problem.
  3. Repair or replace any damaged wiring or connectors to ensure proper signal transmission.
  4. Clear the trouble code from the vehicle's memory and perform a recalibration of the steering position sensor.
  5. Test drive the vehicle to verify that the issue has been resolved and that the steering position signal is now plausible.

Cost to Fix C0710:5A

The typical repair costs for addressing a steering position signal not plausible issue can vary depending on the specific cause of the problem. On average, the parts for a new steering position sensor can range from $100 to $300, while the labor costs can be anywhere from $100 to $200. Overall, the total repair cost for this issue may fall between $200 and $500. However, it's important to note that these are rough estimates, and actual costs can vary based on factors such as location, vehicle make and model, and the rates charged by auto repair shops. It's recommended to obtain quotes from local shops to get a more accurate cost estimate.

What does this mean?

Tech Notes for C0710:5A

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.



Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.



C0710:09 Steering Position Signal Too Fast Transitions

C0710:0A Steering Position Signal Too Slow Transitions

C0710:11 Steering Position Signal High Input

C0710:18 Steering Position Signal Low Signal Amplitude

C0710:19 Steering Position Signal High Signal Amplitude

C0710:42 Steering Position Signal Calibration Not Programmed

C0710:4B Steering Position Signal Calibration Not Learned

C0710:5A Steering Position Signal Not Plausible

C0710:71 Steering Position Signal Invalid Data

Need more information about the C0710:5A code?

Need more information on how to fix the C0710:5A code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710:5A code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710:5A Code

1. What does the OBDII code C0710:5A mean?

The C0710:5A code indicates that the steering position signal from the sensor is not plausible, meaning the signal is inconsistent or outside expected parameters.

2. What are common symptoms of the C0710:5A code?

Symptoms may include a malfunctioning or inoperative electronic stability control (ESC), a warning light on the dashboard, and potential issues with power steering performance.

3. What causes the C0710:5A code to be triggered?

Common causes include a faulty steering angle sensor, wiring issues such as damaged or corroded connections, or a malfunctioning control module.

4. Can I drive my car with the C0710:5A code active?

While the vehicle may be drivable, compromised stability control or steering functionality could pose a safety risk, so it’s advisable to address the issue promptly.

5. How do I diagnose the C0710:5A code?

Diagnosis involves scanning the vehicle with an OBDII tool, inspecting the steering angle sensor and related wiring, and verifying the plausibility of the steering position signal.

6. How is the C0710:5A code typically fixed?

Repairs may include replacing the steering angle sensor, repairing or replacing damaged wiring, or reprogramming or replacing the control module if necessary.

7. Can the C0710:5A code be caused by low battery voltage?

Yes, low or fluctuating battery voltage can cause the steering angle sensor to send implausible signals, potentially triggering this code.

8. Does the C0710:5A code require calibration after repairs?

Yes, after replacing or repairing the steering angle sensor, a recalibration process may be needed to ensure the sensor functions correctly.

9. How much does it cost to repair the C0710:5A code?

Repair costs vary but can range from $150 to $400, depending on whether the steering angle sensor or related components need replacement.

10. Can a wheel alignment issue trigger the C0710:5A code?

Yes, improper wheel alignment or suspension issues can interfere with the steering angle sensor’s readings, potentially causing this code.

Discuss the causes and fixes for C0710:5A OBDII Code

Submit a New Comment

Code C0710:5A comments

No comments found for this page.