Engine-Codes.com
Engine-Codes – Generic – C0710

C0710 Code - Steering Position Signal

Quick Answer

The C0710 diagnostic trouble code (DTC) refers to a steering position signal issue in the vehicle. Common causes include Faulty steering angle sensor (SAS), Wiring harness or connector issues affecting the steering position signal, Electronic control module (ECM) or software problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0710 indicates Steering Position Signal.
Common causes
Common causes include Faulty steering angle sensor (SAS), Wiring harness or connector issues affecting the steering position signal, Electronic control module (ECM) or software problems.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code C0710 Description

The C0710 diagnostic trouble code (DTC) refers to a steering position signal issue in the vehicle. This code typically indicates a problem with the electronic systems that monitor the steering wheel's position and movement. In modern vehicles, various sensors and components work together to ensure accurate steering control and stability. When the steering position signal is compromised, it can affect the vehicle's overall handling, safety, and performance.

OBDII Code C0710 - Steering Position Signal
C0710 Code - Steering Position Signal

Common Causes of C0710

  1. Faulty steering angle sensor (SAS)
  2. Wiring harness or connector issues affecting the steering position signal
  3. Electronic control module (ECM) or software problems
  4. Physical damage to steering components affecting sensor readings
  5. Corrosion or water intrusion in the steering system components

Symptoms of C0710

  1. Illuminated ABS or traction control warning light on the dashboard
  2. Steering wheel feels loose or unresponsive
  3. Erratic or unpredictable steering behavior
  4. Loss of stability control or traction assistance
  5. Difficulty engaging or disengaging cruise control or other driver assistance features

How to Fix C0710

  1. Diagnose the issue with a professional scan tool to pinpoint the exact cause of the steering position signal problem.
  2. Inspect the wiring harness and connectors for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
  3. Test the steering angle sensor (SAS) for proper functionality and calibration. Replace if faulty.
  4. Check and recalibrate the electronic control module (ECM) if necessary to ensure accurate steering position signal readings.
  5. Clear the DTC and perform a test drive to verify that the steering position signal issue has been resolved.

Cost to Fix C0710

The typical repair costs for a steering position signal issue can vary depending on the specific cause of the problem and the vehicle's make and model. On average, you can expect to pay anywhere from $200 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to get a detailed estimate based on your location and vehicle type. It's always a good idea to consult with a trusted mechanic or dealership to get an accurate quote for the repair.

What does this mean?

Tech Notes for C0710

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.



Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.



C0710:09 Steering Position Signal Too Fast Transitions

C0710:0A Steering Position Signal Too Slow Transitions

C0710:11 Steering Position Signal High Input

C0710:18 Steering Position Signal Low Signal Amplitude

C0710:19 Steering Position Signal High Signal Amplitude

C0710:42 Steering Position Signal Calibration Not Programmed

C0710:4B Steering Position Signal Calibration Not Learned

C0710:5A Steering Position Signal Not Plausible

C0710:71 Steering Position Signal Invalid Data

Need more information about the C0710 code?

Need more information on how to fix the C0710 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 code diagnosed by a professional: Find a repair shop in your area

Code C0710 Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 Code

What does OBDII code C0710 indicate?

OBDII code C0710 indicates a problem with the steering position signal, which may affect the vehicle's stability control and steering response.

What are common symptoms of a C0710 code?

Common symptoms include the illumination of the check engine light, erratic steering, loss of power steering assist, and potential issues with traction control.

What can cause the C0710 code to trigger?

Causes may include a faulty steering angle sensor, wiring issues, poor connections, or problems within the vehicle's electronic control unit (ECU).

How can I diagnose a C0710 code?

To diagnose a C0710 code, start by using an OBDII scanner to confirm the code, then inspect the steering angle sensor and its wiring for damage, and check for any related codes.

What repairs are typically needed for a C0710 code?

Repairs may include replacing a faulty steering angle sensor, repairing damaged wiring or connectors, or reprogramming the ECU if necessary.

Can I drive my car with a C0710 code?

While you can drive with a C0710 code, it is not recommended as it may affect steering performance and vehicle stability, potentially leading to unsafe driving conditions.

How much does it typically cost to fix a C0710 code?

The cost to fix a C0710 code can vary widely based on the specific issue but may range from $100 for simple wiring repairs to over $500 for replacing the steering angle sensor.

Will clearing the C0710 code fix the problem?

Clearing the C0710 code will not fix the underlying issue. If the problem persists, the code will likely return after clearing.

How can I prevent a C0710 code from occurring?

Preventative measures include regular vehicle maintenance, ensuring electrical connections are secure, and addressing steering issues promptly before they escalate.

Discuss the causes and fixes for C0710 OBDII Code

Submit a New Comment

Code C0710 comments

No comments found for this page.