C0696 GMC Code - Suspension Position Sensor 5V Supply
Quick Answer
The C0696 GMC code refers to an issue with the Suspension Position Sensor 5V Supply in a GMC vehicle. Common causes include Faulty suspension position sensor, Wiring issues or electrical connection problems, Malfunctioning vehicle computer system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0696 GMC indicates Suspension Position Sensor 5V Supply.
- Common causes
- Common causes include Faulty suspension position sensor, Wiring issues or electrical connection problems, Malfunctioning vehicle computer system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0696 GMC Description
The C0696 GMC code refers to an issue with the Suspension Position Sensor 5V Supply in a GMC vehicle. This sensor plays a crucial role in monitoring the position and movement of the vehicle's suspension system. The suspension position sensor works by sending a 5-volt signal to the vehicle's computer, which then interprets the data to adjust the suspension as needed for optimal performance and handling.
Common Causes of C0696 GMC
- Faulty suspension position sensor
- Wiring issues or electrical connection problems
- Malfunctioning vehicle computer system
- Damage to the suspension components
- Corrosion or rust affecting sensor operation
Symptoms of C0696 GMC
- Rough or bumpy ride quality
- Uneven tire wear
- Difficulty steering or controlling the vehicle
- Illuminated suspension warning light on the dashboard
- Abnormal noises coming from the suspension system
How to Fix C0696 GMC
- Diagnose the issue by using a diagnostic scanner to read the trouble codes and inspecting the suspension position sensor and related components.
- Check and repair any damaged wiring or electrical connections associated with the sensor.
- Replace the suspension position sensor if it is found to be faulty or malfunctioning.
- Reset the vehicle's computer system to clear the trouble code and recalibrate the suspension position sensor.
- Test drive the vehicle to ensure that the suspension system is functioning properly and the issue has been resolved.
Cost to Fix C0696 GMC
The typical repair costs for addressing a suspension position sensor 5V supply issue can vary depending on the specific cause of the problem and the extent of the repairs needed. In general, replacing the sensor and addressing any wiring issues can range from $200 to $500, including parts and labor. It's important to note that the actual cost may vary based on the location, vehicle make and model, and the rates charged by the auto repair shop. It's recommended to obtain a detailed estimate from a qualified mechanic before proceeding with the repairs.
Need more information about the C0696 GMC code?
Need more information on how to fix the C0696 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0696 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- C0696 2014 GMC Sierra — Suspension Position Sensor 5V Supply
- C0696 2015 GMC Sierra — Suspension Position Sensor 5V Supply
- C0696 2016 GMC Sierra — Suspension Position Sensor 5V Supply
- C0696 2017 GMC Sierra — Suspension Position Sensor 5V Supply
- C0696 2018 GMC Sierra — Suspension Position Sensor 5V Supply
Frequently Asked Questions about C0696 GMC Code
1. What does the OBDII code C0696 GMC indicate?
The code C0696 GMC indicates a fault in the Suspension Position Sensor 5V Supply circuit, suggesting that the sensor is not receiving the correct voltage required for operation.
2. What are common symptoms of code C0696 GMC?
Symptoms may include a malfunction indicator lamp (MIL) being illuminated on the dashboard, unusual noises from the suspension area, poor vehicle handling, and possibly a displayed suspension error message.
3. What causes the OBDII code C0696 GMC to be triggered?
Common causes include faulty or damaged suspension position sensors, wiring issues (such as shorts or disconnections in the sensor circuit), or problems with the control module not providing the correct voltage.
4. How can I diagnose the problem associated with code C0696 GMC?
Diagnosis should begin with a visual inspection of the suspension position sensors and associated wiring for any obvious damage or disconnections. Using a multimeter to check for proper voltage supply to the sensor can help identify if the issue is electrical.
5. What steps can be taken to repair the issue causing code C0696 GMC?
Repair may involve replacing faulty sensors, repairing or replacing damaged wires or connectors, and ensuring the control module is functioning correctly and supplying the correct voltage levels.
6. Is it safe to drive with the code C0696 GMC triggered?
While the vehicle may still be drivable, driving with suspension issues can affect the vehicle's handling and stability, potentially making it unsafe. It's advised to address the issue promptly to ensure safety.
7. What tools are needed to fix the OBDII code C0696 GMC?
Tools commonly needed might include a diagnostic scanner, multimeter, basic hand tools for removing and replacing components, and possibly soldering equipment for any necessary wiring repairs.
8. Could code C0696 GMC be indicative of a major issue with the vehicle's suspension system?
Yes, this code could indicate a significant issue within the suspension system's electronic controls, affecting overall vehicle dynamics and safety. It should be examined and resolved by a professional.
9. How often do suspension position sensors fail, resulting in codes like C0696 GMC?
The failure rate can vary based on vehicle usage and conditions, but suspension position sensors are generally robust. However, exposure to harsh conditions like dirt, moisture, and mechanical stress can lead to premature failure.
Discuss the causes and fixes for C0696 GMC OBDII Code
Code C0696 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.