C0273 2014 GMC Sierra Code - Brake Fluid Level Switch Circuit
Quick Answer
The C0273 diagnostic trouble code for a 2014 GMC Sierra indicates a problem with the brake fluid level switch circuit. Common causes include Faulty brake fluid level switch, Wiring issues or corrosion in the circuit, Low brake fluid levels due to leaks or evaporation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0273 2014 GMC Sierra indicates Brake Fluid Level Switch Circuit.
- Common causes
- Common causes include Faulty brake fluid level switch, Wiring issues or corrosion in the circuit, Low brake fluid levels due to leaks or evaporation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0273 2014 GMC Sierra Description
The C0273 diagnostic trouble code for a 2014 GMC Sierra indicates a problem with the brake fluid level switch circuit. The brake fluid level switch is a crucial component in the vehicle's brake system that monitors the level of brake fluid in the reservoir. When the brake fluid level drops below a certain point, the switch sends a signal to the vehicle's computer system to alert the driver of a potential issue.
Common Causes of C0273 2014 GMC Sierra
- Faulty brake fluid level switch
- Wiring issues or corrosion in the circuit
- Low brake fluid levels due to leaks or evaporation
- Electrical problems in the brake fluid level switch circuit
- Sensor malfunction or damage
Symptoms of C0273 2014 GMC Sierra
- Illuminated brake warning light on the dashboard
- Inaccurate or inconsistent brake fluid level readings
- Difficulty in engaging brakes or reduced braking performance
- Brake pedal feels spongy or goes all the way to the floor
How to Fix C0273 2014 GMC Sierra
- Begin by inspecting the brake fluid level switch and its wiring for any visible damage or corrosion.
- Test the brake fluid level switch using a multimeter to determine if it is functioning properly.
- If the switch is faulty, replace it with a new one and ensure proper installation.
- Check the wiring in the circuit for any breaks or damage, repairing or replacing as needed.
- Clear the diagnostic trouble code from the vehicle's computer system using a diagnostic scanner.
Cost to Fix C0273 2014 GMC Sierra
The cost of repairing the brake fluid level switch circuit on a 2014 GMC Sierra can vary depending on the specific issue and whether any parts need to be replaced. On average, the cost for parts can range from $50 to $150, while labor costs can range from $100 to $200. Overall, the total repair cost for this issue may be around $150 to $350. It is important to note that prices can vary based on location, the shop's labor rates, and the extent of the repairs needed. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate.
Need more information about the C0273 2014 GMC Sierra code?
Need more information on how to fix the C0273 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0273 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0273 2014 GMC Sierra Code
1. What does the OBDII code C0273 mean on a 2014 GMC Sierra?
C0273 indicates an issue with the brake fluid level switch circuit, which monitors the brake fluid level and communicates with the vehicle's braking system.
2. What are the common symptoms of code C0273 in a 2014 GMC Sierra?
Typical symptoms include the brake warning light illuminating, reduced braking performance, or a message on the dashboard related to brake system issues.
3. What causes the C0273 code in a GMC Sierra?
Possible causes include a faulty brake fluid level switch, low brake fluid, damaged wiring or connectors in the circuit, or a malfunction in the electronic brake control module (EBCM).
4. Can low brake fluid trigger the C0273 code?
Yes, if the brake fluid is below the recommended level, it can cause the brake fluid level switch to send incorrect signals, resulting in the C0273 code.
5. How do I diagnose the C0273 code on my 2014 GMC Sierra?
Start by checking the brake fluid level, inspecting the brake fluid level switch for damage, and examining the wiring and connectors for corrosion or breaks. Use a diagnostic scanner to confirm the code.
6. How can I fix the C0273 code on my GMC Sierra?
Repair steps may include refilling brake fluid to the proper level, replacing a faulty brake fluid level switch, repairing damaged wiring, or replacing the EBCM if necessary.
7. Is it safe to drive with the C0273 code on my GMC Sierra?
Driving with this code is not recommended, as it may indicate a serious issue with the brake system that could compromise vehicle safety.
8. How much does it cost to fix the C0273 code on a 2014 GMC Sierra?
Repair costs vary but could range from $50 to $150 for a new brake fluid level switch, plus labor. Wiring repairs or EBCM replacement may cost more.
9. Can I clear the C0273 code without fixing the problem?
Clearing the code without addressing the root cause is not advisable, as the issue will likely return and may worsen over time.
10. Does the C0273 code mean my brakes are failing?
Not necessarily, but it signals a potential issue with the brake fluid monitoring system that should be addressed promptly to ensure proper brake function.
Discuss the causes and fixes for C0273 2014 GMC Sierra OBDII Code
Code C0273 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.