C0210 Code - Right Rear Wheel Speed Sensor Signal Malfunction
Quick Answer
The C0210 diagnostic trouble code (DTC) indicates a Right Rear Wheel Speed Sensor Signal Malfunction. Common causes include Faulty right rear wheel speed sensor, Damaged or corroded wiring/connectors, Sensor mounting issues (misalignment, loose sensor). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0210 indicates Right Rear Wheel Speed Sensor Signal Malfunction.
- Common causes
- Common causes include Faulty right rear wheel speed sensor, Damaged or corroded wiring/connectors, Sensor mounting issues (misalignment, loose sensor).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0210 Description
The C0210 diagnostic trouble code (DTC) indicates a Right Rear Wheel Speed Sensor Signal Malfunction. This means that the vehicle's onboard computer has detected an issue with the signal coming from the right rear wheel speed sensor. The wheel speed sensors are crucial components of the anti-lock braking system (ABS) and traction control system, as they monitor the speed of each wheel and provide data to the vehicle's electronic control unit (ECU) to help prevent wheel lockup during braking and improve traction on slippery surfaces.
Common Causes of C0210
- Faulty right rear wheel speed sensor
- Damaged or corroded wiring/connectors
- Sensor mounting issues (misalignment, loose sensor)
- Debris or corrosion affecting the sensor
- ECU malfunction
Symptoms of C0210
- ABS warning light illuminated on the dashboard
- Traction control system warning light activated
- Erratic or inconsistent braking behavior
- Increased stopping distance
- Loss of traction on slippery surfaces
How to Fix C0210
- Diagnose the issue by using a scan tool to retrieve the DTC and inspect the right rear wheel speed sensor and its wiring for any visible damage or corrosion.
- Test the wheel speed sensor using a multimeter to verify its functionality and replace it if necessary.
- Check and repair any damaged wiring or connectors related to the right rear wheel speed sensor.
- Clean the sensor mounting area and ensure proper alignment and secure installation of the sensor.
- Clear the DTC and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix C0210
The cost of repairing a Right Rear Wheel Speed Sensor Signal Malfunction can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. Generally, the average cost of replacing a wheel speed sensor ranges from $100 to $300, including parts and labor. Additional costs may apply if wiring repairs or ECU diagnostics are necessary. It is recommended to consult with a qualified mechanic or service center for a more accurate estimate based on the vehicle's make and model.
Need more information about the C0210 code?
Need more information on how to fix the C0210 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0210 code diagnosed by a professional: Find a repair shop in your area
Code C0210 Information for Specific Makes
- C0210 Buick — Yaw Rate Sensor Signals Voltage
- C0210 Cadillac — Yaw Rate Sensor Signals Voltage
- C0210 Chevrolet — Yaw Rate Sensor Signals Voltage
- C0210 GMC — Yaw Rate Sensor Signals Voltage
- C0210 Lexus — Right Rear Wheel Speed Sensor Signal Malfunction
- C0210 Pontiac — Yaw Rate Sensor Signals Voltage
- C0210 Saturn — Yaw Rate Sensor Signals Voltage
- C0210 Scion — Right Rear Wheel Speed Sensor Signal Malfunction
- C0210 Toyota — Right Rear Wheel Speed Sensor Signal Malfunction
Frequently Asked Questions about C0210 Code
1. What does the OBDII code C0210 mean?
C0210 indicates a malfunction in the right rear wheel speed sensor circuit, which may affect the ABS or stability control systems.
2. What are the symptoms of a C0210 code?
Common symptoms include an illuminated ABS or traction control warning light, reduced braking performance, or intermittent ABS activation.
3. What causes the C0210 code to appear?
This code can be caused by a faulty wheel speed sensor, damaged sensor wiring, corroded connectors, or an issue with the ABS control module.
4. Can I still drive with a C0210 code?
You can drive with this code, but the ABS and traction control systems may not function properly, increasing the risk of skidding in certain conditions.
5. How do I diagnose a C0210 code?
Start by inspecting the right rear wheel speed sensor and its wiring for damage. Use a multimeter to test the sensor’s resistance and verify circuit continuity.
6. How do I fix the C0210 code?
Repairs may involve replacing the right rear wheel speed sensor, repairing damaged wiring, cleaning corroded connectors, or recalibrating the ABS system.
7. How much does it cost to fix a C0210 code?
Replacing a wheel speed sensor typically costs $100–$300, including parts and labor, though costs may vary based on the vehicle.
8. Can a dirty wheel bearing trigger the C0210 code?
Yes, if debris or dirt affects the sensor's ability to read the wheel speed, it can trigger this code.
9. Will clearing the C0210 code fix the problem?
Clearing the code will turn off the warning light temporarily, but if the underlying issue isn’t resolved, the code will return.
10. Does a C0210 code affect the vehicle’s braking system?
Yes, it can disable the ABS and traction control systems, but the vehicle’s standard hydraulic brakes will still function.
Discuss the causes and fixes for C0210 OBDII Code
Code C0210 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.