C0136 GMC Code - Base Brake System Pressure Circuit/Sensor
Quick Answer
The C0136 GMC code refers to an issue with the base brake system pressure circuit or sensor. Common causes include Faulty base brake system pressure sensor, Damaged or corroded wiring in the pressure circuit, Loose or disconnected connectors in the brake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0136 GMC indicates Base Brake System Pressure Circuit/Sensor.
- Common causes
- Common causes include Faulty base brake system pressure sensor, Damaged or corroded wiring in the pressure circuit, Loose or disconnected connectors in the brake system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0136 GMC Description
The C0136 GMC code refers to an issue with the base brake system pressure circuit or sensor. The base brake system is a crucial component of a vehicle's braking system, responsible for generating and maintaining hydraulic pressure to facilitate proper braking function. The pressure sensor within this system helps monitor and regulate the pressure levels to ensure efficient and safe braking performance.
Common Causes of C0136 GMC
- Faulty base brake system pressure sensor
- Damaged or corroded wiring in the pressure circuit
- Loose or disconnected connectors in the brake system
- Malfunctioning brake control module
- Low brake fluid levels or air in the brake lines
Symptoms of C0136 GMC
- Illumination of the brake warning light on the dashboard
- Increased brake pedal effort required to stop the vehicle
- Longer than usual stopping distances
- Abnormal noises or vibrations when applying the brakes
- In severe cases, complete brake failure
How to Fix C0136 GMC
- Perform a thorough inspection of the base brake system to identify the specific cause of the issue.
- Test the base brake system pressure sensor to determine if it is functioning correctly.
- Check and repair any damaged wiring or connectors in the pressure circuit.
- Replace the faulty pressure sensor or brake control module if necessary.
- Bleed the brake system to ensure proper hydraulic pressure and functionality.
Cost to Fix C0136 GMC
The cost of repairing a base brake system pressure circuit/sensor issue can vary depending on the specific cause of the problem and the extent of the repairs needed. On average, the parts for this repair can range from $100 to $300, while labor costs can range from $150 to $400. This brings the total cost of the repair to approximately $250 to $700. However, it is important to note that these are rough estimates, and actual costs may vary based on factors such as location, vehicle make and model, and the rates charged by individual auto repair shops. It is recommended to obtain quotes from local repair facilities for a more accurate cost estimate.
Need more information about the C0136 GMC code?
Need more information on how to fix the C0136 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0136 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0136 GMC Code
What does the OBDII code C0136 mean for my GMC vehicle?
The OBDII code C0136 indicates a problem with the base brake system pressure circuit or sensor, typically related to the hydraulic brake system.
What are the common symptoms of a C0136 code?
Common symptoms include the brake warning light illuminated on the dashboard, reduced braking efficiency, and possible abnormal brake pedal feel.
What could cause the C0136 code to trigger?
Causes may include a faulty pressure sensor, wiring issues in the brake system, low brake fluid level, or problems with the brake master cylinder.
How can I diagnose the C0136 code?
To diagnose the C0136 code, use an OBDII scanner to confirm the code, visually inspect the brake system for leaks or damaged wiring, and check the brake fluid level.
Is it safe to drive with a C0136 code?
It is not advisable to drive with a C0136 code, as it may indicate issues with your brake system that can compromise safety.
What are some potential repairs for a C0136 code?
Potential repairs include replacing the faulty pressure sensor, repairing damaged wiring, and ensuring proper brake fluid levels.
How much will it cost to fix a C0136 code?
Repair costs can vary widely depending on the specific issue but may range from $100 to $500, including parts and labor.
Can I clear the C0136 code myself?
Yes, you can clear the C0136 code using an OBDII scanner; however, it is essential to address the underlying issue to prevent the code from reappearing.
Will a C0136 code affect my vehicle's performance?
Yes, a C0136 code can affect braking performance and may lead to a longer stopping distance or brake failure if not addressed promptly.
Discuss the causes and fixes for C0136 GMC OBDII Code
Code C0136 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.