C0106 Code - Abnormal Signal Of Rear ABS Wheel Speed Sensor Left
Quick Answer
The C0106 code indicates that there is an abnormal signal coming from the rear ABS wheel speed sensor on the left side of the vehicle. Common causes include Faulty ABS wheel speed sensor, Damaged or corroded wiring/connectors, ABS control module malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0106 indicates Abnormal Signal Of Rear ABS Wheel Speed Sensor Left.
- Common causes
- Common causes include Faulty ABS wheel speed sensor, Damaged or corroded wiring/connectors, ABS control module malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code C0106 Description
The C0106 code indicates that there is an abnormal signal coming from the rear ABS wheel speed sensor on the left side of the vehicle. The ABS (Anti-lock Braking System) wheel speed sensors are responsible for monitoring the speed of each wheel and transmitting this data to the ABS control module. This information is crucial for the ABS to function properly and prevent the wheels from locking up during braking, especially in emergency situations.
Common Causes of C0106
- Faulty ABS wheel speed sensor
- Damaged or corroded wiring/connectors
- ABS control module malfunction
- Wheel bearing issues affecting sensor performance
- Contaminants or debris interfering with sensor operation
Symptoms of C0106
- ABS warning light illuminated on the dashboard
- Traction control system engaging unexpectedly
- Increased stopping distances during braking
- ABS system malfunctioning or not working properly
- Uneven braking or pulling to one side while braking
How to Fix C0106
- Diagnose the specific cause of the abnormal signal using a professional diagnostic tool.
- Inspect the rear ABS wheel speed sensor, wiring, and connectors for damage or corrosion.
- Replace the faulty ABS wheel speed sensor if necessary.
- Repair or replace damaged wiring/connectors as needed.
- Reset the ABS system and clear the diagnostic trouble codes to verify the repair.
Cost to Fix C0106
The typical repair costs for addressing an abnormal signal of the rear ABS wheel speed sensor left can range from $150 to $300, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It is advisable to check local rates for a more precise estimate. Keep in mind that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the C0106 code?
Need more information on how to fix the C0106 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0106 code diagnosed by a professional: Find a repair shop in your area
Code C0106 Information for Specific Makes
- C0106 Subaru — Abnormal Signal Of Rear ABS Wheel Speed Sensor Left
Frequently Asked Questions about C0106 Code
1. What are the common symptoms of OBDII code C0106 (Abnormal Signal Of Rear ABS Wheel Speed Sensor Left)?
The common symptoms include the ABS warning light illuminating on the dashboard, unstable braking, and potential traction control system issues.
2. What are the possible causes of OBDII code C0106?
The code C0106 is typically triggered by a faulty rear ABS wheel speed sensor on the left side, damaged wiring or connectors, or issues with the ABS control module.
3. How can I diagnose the cause of OBDII code C0106?
You can diagnose the cause by conducting a visual inspection of the wheel speed sensor and related wiring, performing a scan tool test to check sensor readings, and conducting a road test to observe ABS system behavior.
4. Can a DIY enthusiast repair OBDII code C0106 at home?
Yes, depending on the exact cause, DIY repairs are possible for this code. You may need to replace the rear ABS wheel speed sensor, repair damaged wiring, or reset the ABS system using a scan tool.
5. How important is it to address OBDII code C0106 promptly?
It is crucial to address the code promptly as it indicates a potential issue with the ABS system, which is essential for safe braking and vehicle stability.
6. Are there any temporary fixes for OBDII code C0106?
Temporary fixes like clearing the code with a scan tool may temporarily turn off the warning light, but addressing the root cause is necessary to ensure proper functionality.
7. Can driving with OBDII code C0106 cause further damage to the vehicle?
Continuing to drive with the code may lead to compromised ABS system performance, affecting braking efficiency and overall vehicle safety.
8. How much does it typically cost to repair OBDII code C0106 at a repair shop?
The cost of repair can vary depending on the exact cause, but it may involve sensor replacement, wiring repairs, or ABS module reprogramming, ranging from $100 to $500 or more.
9. Is it safe to drive my vehicle with OBDII code C0106 if ABS functionality is affected?
It is not recommended to drive the vehicle if ABS functionality is compromised, as it can increase the risk of accidents, especially in slippery or emergency braking situations.
10. How long does it usually take to repair OBDII code C0106?
The repair time can vary based on the complexity of the issue, but skilled technicians can typically diagnose and repair the problem within a few hours to a day, depending on parts availability.
Discuss the causes and fixes for C0106 OBDII Code
Code C0106 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.