B3922 Buick Code - Front Wiper Function Select Circuit
Quick Answer
The B3922 diagnostic trouble code (DTC) for Buick vehicles refers to an issue with the Front Wiper Function Select Circuit. Common causes include Faulty front wiper control switch, Damaged wiring or connectors in the Front Wiper Function Select Circuit, Defective wiper motor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3922 Buick indicates Front Wiper Function Select Circuit.
- Common causes
- Common causes include Faulty front wiper control switch, Damaged wiring or connectors in the Front Wiper Function Select Circuit, Defective wiper motor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B3922 Buick Description
The B3922 diagnostic trouble code (DTC) for Buick vehicles refers to an issue with the Front Wiper Function Select Circuit. This code indicates a problem with the circuit that controls the front wiper system's various functions, such as speed settings, intermittent operation, and washer fluid activation. The Front Wiper Function Select Circuit is responsible for receiving input from the wiper control switch and sending signals to the wiper motor to adjust its operation accordingly.
Common Causes of B3922 Buick
- Faulty front wiper control switch.
- Damaged wiring or connectors in the Front Wiper Function Select Circuit.
- Defective wiper motor.
- Corrosion or poor connections in the circuit.
- Issues with the Body Control Module (BCM) responsible for wiper system control.
Symptoms of B3922 Buick
- Front wipers not responding to control switch inputs.
- Wipers operating at incorrect speeds or intermittently.
- Wipers getting stuck in one position.
- Inability to activate washer fluid along with wiper operation.
How to Fix B3922 Buick
- Begin by conducting a thorough inspection of the front wiper system, including the control switch, wiring, connectors, and wiper motor.
- Use a multimeter to test the continuity of the Front Wiper Function Select Circuit and identify any open or short circuits.
- Check for any signs of corrosion or damage in the wiring and connectors, repairing or replacing them as necessary.
- Test the wiper motor's functionality and replace it if found to be faulty.
- Reset the BCM and reprogram it if needed to ensure proper communication with the wiper system.
Cost to Fix B3922 Buick
The typical repair costs for addressing the B3922 code related to the Front Wiper Function Select Circuit can vary depending on the extent of the issue and the specific components that require repair or replacement. On average, the parts and labor for this repair could range from $150 to $400. However, it's important to note that diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and the complexity of the repair. It's advisable to consult with a professional technician or local repair shop to get a more accurate estimate based on your specific circumstances.
Need more information about the B3922 Buick code?
Need more information on how to fix the B3922 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3922 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3922 Buick Code
1. What does the OBDII code B3922 mean for a Buick?
B3922 indicates an issue with the Front Wiper Function Select Circuit, which affects the operation of the windshield wipers.
2. What are common symptoms of the B3922 code?
Symptoms may include wipers not functioning, operating only on certain speeds, or failing to respond to the wiper switch.
3. What causes the B3922 code to appear?
Common causes include a faulty wiper switch, damaged wiring or connectors, or a malfunctioning wiper motor.
4. Can I still drive my Buick with the B3922 code?
Yes, but driving without functional wipers can be unsafe in bad weather, so it’s important to address the issue promptly.
5. How do I diagnose the B3922 code?
Diagnosis involves inspecting the wiper switch, testing the circuit for continuity, and checking for signs of damaged wiring or loose connectors.
6. What tools are needed to troubleshoot the B3922 code?
You’ll need a multimeter to test the circuit, an OBDII scanner to confirm the code, and possibly a wiring diagram for reference.
7. How do I fix the B3922 code on my Buick?
Repairs may include replacing the wiper switch, repairing damaged wiring, or replacing the wiper motor if it’s faulty.
8. How much does it cost to repair a B3922 code?
Repair costs vary depending on the specific issue, but replacing a wiper switch typically costs $100–$300, including parts and labor.
9. Can a blown fuse cause the B3922 code?
It’s possible if the fuse connected to the wiper circuit is blown, so it’s worth checking during the diagnostic process.
10. Is the B3922 code specific to Buicks?
While it commonly appears on Buicks, other GM vehicles may also use this code for similar wiper circuit issues.
Discuss the causes and fixes for B3922 Buick OBDII Code
Code B3922 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.