B3857 Pontiac Code - Incorrect Rollover Sensor Installed
Quick Answer
The B3857 diagnostic trouble code (DTC) in a Pontiac indicates that there is an incorrect rollover sensor installed in the vehicle. Common causes include Incorrect installation of a replacement rollover sensor, Faulty wiring or connections to the rollover sensor, Damage to the rollover sensor due to impact or corrosion. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3857 Pontiac indicates Incorrect Rollover Sensor Installed.
- Common causes
- Common causes include Incorrect installation of a replacement rollover sensor, Faulty wiring or connections to the rollover sensor, Damage to the rollover sensor due to impact or corrosion.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B3857 Pontiac Description
The B3857 diagnostic trouble code (DTC) in a Pontiac indicates that there is an incorrect rollover sensor installed in the vehicle. The rollover sensor is a crucial component of the vehicle's safety system, as it is designed to detect the angle at which the vehicle is tilting and deploy the airbags and other safety measures accordingly in the event of a rollover. When the incorrect rollover sensor is installed, it can lead to incorrect readings and potentially compromise the effectiveness of the vehicle's safety systems.
Common Causes of B3857 Pontiac
- Incorrect installation of a replacement rollover sensor
- Faulty wiring or connections to the rollover sensor
- Damage to the rollover sensor due to impact or corrosion
- Incompatibility between the replacement sensor and the vehicle's system
Symptoms of B3857 Pontiac
- Airbag warning light is illuminated on the dashboard
- False alarms or unexpected deployment of airbags
- Inconsistent or erratic behavior of other safety systems
- Loss of confidence in the vehicle's safety features
How to Fix B3857 Pontiac
- Diagnose the issue by using a scan tool to read the DTC and verify the rollover sensor's functionality
- Identify the correct rollover sensor model for the vehicle
- Remove the incorrect sensor and replace it with the correct one
- Test the new sensor to ensure proper functionality
- Clear the DTC and reset the airbag system if necessary
Cost to Fix B3857 Pontiac
The typical repair costs for addressing an incorrect rollover sensor installed in a Pontiac can vary depending on the specific model and year of the vehicle, as well as the labor rates in your area. On average, the parts for a replacement rollover sensor can cost between $200 and $500, while the labor cost can range from $100 to $300. In total, you can expect to pay anywhere from $300 to $800 for this repair. It's recommended to contact local auto repair shops for a more accurate cost estimate based on your vehicle's specific needs. Keep in mind that additional costs may apply if there are other underlying issues contributing to the incorrect rollover sensor code.
Need more information about the B3857 Pontiac code?
Need more information on how to fix the B3857 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3857 Pontiac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B3857 Pontiac Code
1. What does the OBDII code B3857 mean on a Pontiac?
The code B3857 indicates that the incorrect rollover sensor has been installed in the vehicle, causing a mismatch with the vehicle's specifications.
2. What are the symptoms of the B3857 code?
Common symptoms include the airbag warning light being illuminated, potential deactivation of the airbag system, or error messages related to the rollover sensor.
3. What causes the B3857 code to appear?
The main cause is the installation of a rollover sensor that does not match the vehicle's specifications or communication errors between the sensor and the airbag control module.
4. Can driving with the B3857 code be dangerous?
Yes, it can be dangerous as the airbag system may not function properly in the event of a rollover or collision.
5. How do I diagnose the B3857 code?
Diagnose the code by using a scan tool to read the error, checking the part number of the installed rollover sensor, and verifying compatibility with your vehicle.
6. How can I fix the B3857 code?
Fix the issue by replacing the incorrect rollover sensor with the correct one specified for your Pontiac model.
7. Can I clear the B3857 code without replacing the sensor?
Clearing the code without replacing the sensor may temporarily remove the warning, but the issue will likely return until the correct sensor is installed.
8. Who should repair the B3857 code issue?
It is recommended to have a qualified mechanic or dealership technician handle the issue to ensure the correct sensor is installed and the airbag system is functioning properly.
9. How much does it cost to fix the B3857 code?
The cost depends on the price of the correct rollover sensor and labor charges, which can vary based on your location and vehicle model.
10. Can a faulty airbag control module cause the B3857 code?
While rare, a malfunctioning airbag control module could misinterpret the rollover sensor, but this is less common than an incorrect sensor being installed.
Discuss the causes and fixes for B3857 Pontiac OBDII Code
Code B3857 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.