B3715 Code - Windshield Wiper Relay Drive Circuit
Quick Answer
The B3715 code indicates a problem with the windshield wiper relay drive circuit in the vehicle. Common causes include Faulty windshield wiper relay, Electrical wiring issues, Corrosion or damage to the relay drive circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3715 indicates Windshield Wiper Relay Drive Circuit.
- Common causes
- Common causes include Faulty windshield wiper relay, Electrical wiring issues, Corrosion or damage to the relay drive circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B3715 Description
The B3715 code indicates a problem with the windshield wiper relay drive circuit in the vehicle. The windshield wiper relay is responsible for controlling the operation of the windshield wipers, allowing them to move at the appropriate speed and interval. When this circuit is not functioning properly, it can lead to issues with the windshield wipers, affecting visibility and safety while driving.
Common Causes of B3715
- Faulty windshield wiper relay.
- Electrical wiring issues.
- Corrosion or damage to the relay drive circuit.
- Poor connections or loose wiring.
- Malfunctioning wiper motor.
Symptoms of B3715
- Intermittent or complete failure of windshield wiper operation.
- Wipers moving at incorrect speeds.
- Wipers moving at irregular intervals.
- Inability to clear the windshield effectively.
How to Fix B3715
- Diagnose the issue by checking the windshield wiper relay and associated wiring for any visible damage or corrosion.
- Test the relay using a multimeter to determine if it is functioning properly.
- Replace the faulty windshield wiper relay if it is found to be the cause of the issue.
- Inspect and repair any damaged wiring or connections in the relay drive circuit.
- Test the windshield wipers after the repair to ensure they are operating correctly.
Cost to Fix B3715
The cost of repairing a windshield wiper relay drive circuit issue can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the cost of parts for this repair can range from $50 to $150, while the labor costs can be around $100 to $200. Overall, the total repair cost may amount to approximately $150 to $350. It's important to note that these estimates are general figures and actual costs may differ based on the vehicle's make and model, the location of the repair shop, and any additional repairs that may be needed. It's recommended to obtain quotes from local auto repair shops for a more accurate cost estimate.
Need more information about the B3715 code?
Need more information on how to fix the B3715 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3715 code diagnosed by a professional: Find a repair shop in your area
Code B3715 Information for Specific Makes
- B3715 Buick — Windshield Wiper Relay Drive Circuit
- B3715 Cadillac — Windshield Wiper Relay Drive Circuit
- B3715 Chevrolet — Windshield Wiper Relay Drive Circuit
- B3715 GMC — Windshield Wiper Relay Drive Circuit
- B3715 Pontiac — Windshield Wiper Relay Drive Circuit
- B3715 Saturn — Windshield Wiper Relay Drive Circuit
Frequently Asked Questions about B3715 Code
What does the OBDII code B3715 indicate?
The OBDII code B3715 indicates a malfunction in the windshield wiper relay drive circuit, which can affect the operation of the windshield wipers.
What symptoms might I experience if my vehicle has a B3715 code?
Common symptoms include inoperative windshield wipers, intermittent wiper function, or wipers that operate erratically.
What are some possible causes of the B3715 code?
Possible causes include a faulty windshield wiper relay, damaged wiring in the relay circuit, a malfunctioning wiper control module, or a blown fuse.
How can I diagnose the B3715 code?
To diagnose B3715, check the windshield wiper relay and its connections, inspect the wiring for damage, test the control module, and verify that the fuses are intact.
What is the first step in fixing a B3715 code?
The first step is to visually inspect the windshield wiper relay and its wiring for any signs of damage or corrosion.
Can I clear the B3715 code, and will it come back?
Yes, you can clear the code using an OBDII scanner, but if the underlying issue isn't resolved, the code will likely return.
What tools do I need to repair the B3715 code?
You will need basic automotive tools, including a multimeter for electrical testing, a socket set for removing components, and an OBDII scanner for code reading.
Is it safe to drive with a B3715 code?
While it is technically safe to drive, inoperative wipers can be dangerous in adverse weather conditions, so it’s advisable to address the issue promptly.
How much does it typically cost to repair a B3715 code?
Repair costs can vary widely depending on the cause but typically range from $50 to $300, including parts and labor.
Can I fix the B3715 code myself?
If you have basic automotive repair skills and tools, you may be able to diagnose and replace the faulty relay or repair damaged wiring yourself. Otherwise, it’s best to consult a professional mechanic.
Discuss the causes and fixes for B3715 OBDII Code
Code B3715 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.