B3702 Cadillac Code - Intermittent Wiper Delay Input Circuit Low
Quick Answer
The B3702 diagnostic trouble code (DTC) for Cadillac vehicles indicates an issue with the intermittent wiper delay input circuit being low. Common causes include Faulty wiper delay control module, Corroded or damaged wiring in the intermittent wiper circuit, Loose or poor electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3702 Cadillac indicates Intermittent Wiper Delay Input Circuit Low.
- Common causes
- Common causes include Faulty wiper delay control module, Corroded or damaged wiring in the intermittent wiper circuit, Loose or poor electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B3702 Cadillac Description
The B3702 diagnostic trouble code (DTC) for Cadillac vehicles indicates an issue with the intermittent wiper delay input circuit being low. This means that there is a problem with the signal being sent from the wiper delay control module to the vehicle's computer. The wiper delay function allows the driver to adjust the speed at which the wipers operate intermittently, providing better visibility in varying weather conditions. When this circuit is low, it can lead to erratic wiper behavior or even complete failure of the intermittent wiper function.
Common Causes of B3702 Cadillac
- Faulty wiper delay control module.
- Corroded or damaged wiring in the intermittent wiper circuit.
- Loose or poor electrical connections.
- Water or moisture intrusion causing electrical issues.
- Defective wiper motor.
Symptoms of B3702 Cadillac
- Wipers not operating at the set intermittent speed.
- Wipers operating erratically or inconsistently.
- Wipers not responding to delay settings.
- Wipers not stopping in the correct position after use.
- Wipers not functioning at all.
How to Fix B3702 Cadillac
- Begin by conducting a thorough inspection of the wiper delay control module, wiring, and connections for any visible damage or corrosion.
- Test the intermittent wiper delay input circuit using a multimeter to check for proper voltage levels.
- Replace any damaged wiring or connectors in the circuit.
- If the issue persists, replace the wiper delay control module.
- Test the wiper system after repairs to ensure proper functionality.
Cost to Fix B3702 Cadillac
The cost of repairing the intermittent wiper delay input circuit low issue can vary depending on the specific cause of the problem and the labor rates in your area. In general, the cost of parts for this repair could range from $50 to $200, while labor costs could range from $100 to $300. It is advisable to consult with a professional mechanic to get an accurate estimate based on your vehicle's make and model, as well as the extent of the repair needed. Keep in mind that additional diagnostic time may be necessary to pinpoint the exact cause of the issue before proceeding with repairs.
Need more information about the B3702 Cadillac code?
Need more information on how to fix the B3702 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3702 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3702 Cadillac Code
1. What does the OBDII code B3702 mean on a Cadillac?
The code B3702 indicates an issue with the intermittent wiper delay input circuit, specifically that it is reading a low voltage or signal.
2. What are the common symptoms of code B3702 in a Cadillac?
Symptoms may include intermittent wipers not functioning, wipers stuck at one speed, or failure to adjust the wiper delay setting.
3. What causes the B3702 code to appear?
Common causes include a faulty wiper switch, damaged wiring or connectors in the wiper delay circuit, or a malfunctioning body control module (BCM).
4. Can I still drive my Cadillac with the B3702 code active?
Yes, you can usually drive safely with this code, but it may cause inconvenience during rain if the wipers don’t function properly.
5. How do I diagnose the B3702 code on my Cadillac?
Start by inspecting the wiper switch, wiring, and connectors for damage or corrosion. Use a multimeter to check for continuity and proper voltage in the circuit.
6. What tools are needed to fix the B3702 code?
Basic tools like a multimeter, wiring diagram, and possibly an OBDII scanner for clearing the code after repair are typically required.
7. How much does it cost to fix the B3702 code on a Cadillac?
Repairs can range from $50 to $300 depending on whether you need to replace the wiper switch, repair wiring, or address issues with the BCM.
8. Can a faulty wiper motor cause the B3702 code?
While unlikely, a faulty wiper motor could indirectly affect the circuit, so it’s worth testing if other components check out.
9. Will clearing the B3702 code solve the problem?
Clearing the code may temporarily remove it, but the underlying issue must be resolved to prevent it from returning.
10. When should I seek professional help for the B3702 code?
If you’re unable to identify or repair the issue after inspecting the switch and wiring, it’s best to consult a professional mechanic for further diagnosis.
Discuss the causes and fixes for B3702 Cadillac OBDII Code
Code B3702 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.