B3606:61 Code - Adjustable Pedal Position Sensor Circuit Stuck
Quick Answer
The B3606:61 diagnostic trouble code indicates that the adjustable pedal position sensor circuit is stuck. Common causes include Faulty adjustable pedal position sensor, Corrosion or damage to sensor wiring, Loose or disconnected sensor connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3606:61 indicates Adjustable Pedal Position Sensor Circuit Stuck.
- Common causes
- Common causes include Faulty adjustable pedal position sensor, Corrosion or damage to sensor wiring, Loose or disconnected sensor connector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B3606:61 Description
The B3606:61 diagnostic trouble code indicates that the adjustable pedal position sensor circuit is stuck. The adjustable pedal position sensor is responsible for detecting the position of the pedals (accelerator, brake, and clutch pedals) in vehicles equipped with adjustable pedals. The sensor sends this information to the vehicle's engine control module (ECM) to assist in various functions, such as cruise control and throttle response. When the sensor circuit is stuck, it means that the sensor is unable to provide accurate pedal position information to the ECM, potentially leading to performance issues.
Common Causes of B3606:61
- Faulty adjustable pedal position sensor
- Corrosion or damage to sensor wiring
- Loose or disconnected sensor connector
- ECM software issue
- Electrical system malfunction
Symptoms of B3606:61
- Inaccurate pedal position readings
- Cruise control not functioning properly
- Delayed throttle response
- Check Engine Light illuminated
- Vehicle going into limp mode
How to Fix B3606:61
- Perform a visual inspection of the adjustable pedal position sensor and wiring for any visible damage or corrosion.
- Test the sensor using a multimeter to check for proper resistance values.
- Check the sensor connector for any loose or disconnected wires and ensure proper connection.
- Clear the diagnostic trouble codes and reset the ECM to see if the issue resolves.
- If the problem persists, replace the adjustable pedal position sensor with a new one.
Cost to Fix B3606:61
The cost of repairing a stuck adjustable pedal position sensor circuit can vary depending on the make and model of the vehicle, as well as the labor rates in your area. On average, the cost of replacing an adjustable pedal position sensor ranges from $100 to $300, including parts and labor. However, additional diagnostic time may be required to pinpoint the exact cause of the issue, so it's advisable to consult with a professional mechanic for a more accurate estimate. Labor rates typically range from $80 to $150 per hour, but can be higher at dealerships or in metropolitan areas.
Tech Notes for B3606:61
B3606:06 Adjustable Pedal Position Sensor Circuit Low Voltage/Open
B3606:5A Adjustable Pedal Position Sensor Circuit Not Plausible
B3606:61 Adjustable Pedal Position Sensor Circuit Stuck
Need more information about the B3606:61 code?
Need more information on how to fix the B3606:61 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3606:61 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3606:61 Code
1. What does the OBDII code B3606:61 mean?
The code B3606:61 indicates an issue with the Adjustable Pedal Position Sensor Circuit being stuck, likely due to a malfunction in the sensor or its related wiring.
2. What are the common symptoms of the B3606:61 code?
The most common symptoms include unresponsive or stuck adjustable pedals, a warning light on the dashboard, and potentially limited pedal movement.
3. What causes the B3606:61 code to appear?
This code is typically caused by a faulty pedal position sensor, damaged or corroded wiring, poor electrical connections, or mechanical obstructions in the pedal assembly.
4. Can I drive my vehicle with the B3606:61 code?
While the vehicle may still be drivable, it’s not recommended as the adjustable pedals may not function properly, which could affect driving comfort or safety.
5. How is the B3606:61 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the pedal position sensor and related wiring, and check for mechanical obstructions in the pedal assembly.
6. How can I fix the B3606:61 code?
Repairs may include replacing the faulty pedal position sensor, repairing damaged wiring, cleaning corroded connectors, or addressing any mechanical issues in the pedal assembly.
7. How much does it cost to repair the B3606:61 code?
The repair cost varies depending on the issue, but replacing the pedal position sensor typically costs between $100 and $300, including parts and labor.
8. Can I reset the B3606:61 code without fixing the problem?
Clearing the code without addressing the underlying issue may temporarily turn off the warning, but the problem will likely return until properly repaired.
9. Is the B3606:61 code common in all vehicles?
This code is specific to vehicles equipped with adjustable pedals and may be more common in certain makes and models that use similar systems.
10. What tools are needed to troubleshoot the B3606:61 code?
A diagnostic scan tool, a multimeter for checking electrical connections, and basic hand tools for accessing and inspecting the pedal assembly are typically required.
Discuss the causes and fixes for B3606:61 OBDII Code
Code B3606:61 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.