B2964 GMC Code - Key In Ignition Circuit High
Quick Answer
The B2964 GMC diagnostic trouble code (DTC) indicates that there is a high voltage condition in the key in ignition circuit. Common causes include Faulty key fob or key, Damaged key detection sensor, Wiring issues in the key detection circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2964 GMC indicates Key In Ignition Circuit High.
- Common causes
- Common causes include Faulty key fob or key, Damaged key detection sensor, Wiring issues in the key detection circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2964 GMC Description
The B2964 GMC diagnostic trouble code (DTC) indicates that there is a high voltage condition in the key in ignition circuit. This code is typically found in vehicles with keyless entry systems and push-button start features. The key in ignition circuit is responsible for detecting the presence of the key fob or key in the vehicle, allowing the engine to start and preventing unauthorized starting of the vehicle. When this circuit detects a high voltage, it means that there is an issue with the key detection system, which can lead to starting problems or even prevent the vehicle from starting altogether.
Common Causes of B2964 GMC
- Faulty key fob or key
- Damaged key detection sensor
- Wiring issues in the key detection circuit
- Malfunctioning control module
Symptoms of B2964 GMC
- Engine not starting or turning over
- Intermittent starting issues
- Dashboard warning lights (security light, key symbol)
- Key fob not detected message on the instrument cluster
How to Fix B2964 GMC
- Inspect the key fob and key for any damage or malfunction. Replace if necessary.
- Check the key detection sensor for proper operation and replace if faulty.
- Inspect the wiring in the key detection circuit for any damage or loose connections. Repair or replace as needed.
- Scan the vehicle's computer system for any stored fault codes and perform necessary repairs or resets.
- If the issue persists, consult a professional technician for further diagnosis and repair.
Cost to Fix B2964 GMC
The cost of repairing a key in ignition circuit high issue can vary depending on the specific cause of the problem and the extent of the repairs needed. In general, the cost of parts for this repair can range from $50 to $200, while labor costs can range from $100 to $300. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate.
Need more information about the B2964 GMC code?
Need more information on how to fix the B2964 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2964 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2964 GMC Code
1. What are the common symptoms of OBDII code B2964 GMC (Key In Ignition Circuit High)?
- Common symptoms include the inability to start the vehicle, issues with the ignition system, and the key not being recognized.
2. What are the possible causes of OBDII code B2964 GMC?
- The code may be triggered by a faulty ignition switch, a damaged key, issues with the immobilizer system, or wiring problems in the key-in-ignition circuit.
3. How can I diagnose OBDII code B2964 GMC at home?
- You can start by checking the key for any physical damage, ensuring it is the correct key for the vehicle, and inspecting the wiring connected to the ignition switch for any visible issues.
4. Is it safe to drive with OBDII code B2964 GMC active?
- It is not recommended to drive with this code active, as it may result in the vehicle not starting or shutting off unexpectedly while driving.
5. Can I reset OBDII code B2964 GMC without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is essential to address the root cause to prevent the issue from reoccurring.
6. How much does it typically cost to repair OBDII code B2964 GMC?
- The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $500, including parts and labor.
7. Are there any DIY repair tips for fixing OBDII code B2964 GMC?
- DIY repair tips may include checking and cleaning the key contacts, inspecting and repairing any damaged wiring, or replacing the ignition switch if necessary.
8. Can a locksmith help with OBDII code B2964 GMC related issues?
- Yes, a locksmith specializing in automotive keys and immobilizer systems may be able to assist in diagnosing and resolving the issue.
9. Will OBDII code B2964 GMC cause my vehicle to fail an emissions test?
- Depending on the regulations in your area, a persistent issue with this code may cause your vehicle to fail an emissions test, as it can affect the proper functioning of the ignition system.
10. How long does it take to repair OBDII code B2964 GMC?
- The repair time can vary based on the specific cause of the code and the availability of parts, but it may take anywhere from a few hours to a day to complete the repair.
Discuss the causes and fixes for B2964 GMC OBDII Code
Code B2964 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.