Engine-Codes.com
Engine-Codes – RAM – B2767 RAM

B2767 RAM Code - Left Impact Pressure Sensor

Quick Answer

The B2767 diagnostic trouble code (DTC) refers to an issue with the Left Impact Pressure Sensor in the vehicle. Common causes include Faulty Left Impact Pressure Sensor, Wiring issues or corrosion in the sensor circuit, Damage to the sensor due to impact or collision. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2767 RAM indicates Left Impact Pressure Sensor.
Common causes
Common causes include Faulty Left Impact Pressure Sensor, Wiring issues or corrosion in the sensor circuit, Damage to the sensor due to impact or collision.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2767 RAM Description

The B2767 diagnostic trouble code (DTC) refers to an issue with the Left Impact Pressure Sensor in the vehicle. This sensor is a crucial component of the vehicle's safety system, specifically designed to detect impacts or collisions on the left side of the vehicle. When this sensor malfunctions or fails, it can have serious implications for the vehicle's safety features and overall performance.

OBDII Code B2767 RAM - Left Impact Pressure Sensor
B2767 RAM Code - Left Impact Pressure Sensor

Common Causes of B2767 RAM

  1. Faulty Left Impact Pressure Sensor.
  2. Wiring issues or corrosion in the sensor circuit.
  3. Damage to the sensor due to impact or collision.
  4. Issues with the airbag control module.
  5. Software glitches or malfunctions in the vehicle's computer system.

Symptoms of B2767 RAM

  1. Airbag warning light illuminated on the dashboard.
  2. Inaccurate or delayed airbag deployment in a collision.
  3. Fault codes related to the airbag system stored in the vehicle's computer.
  4. Loss of communication with the airbag control module.

How to Fix B2767 RAM

  1. Begin by diagnosing the specific cause of the B2767 code using a professional diagnostic scan tool.
  2. Inspect the wiring and connections related to the Left Impact Pressure Sensor for any damage or corrosion.
  3. Test the sensor itself to determine if it is functioning correctly or needs replacement.
  4. If the sensor is faulty, replace it with a new, OEM-quality sensor.
  5. Clear the DTCs from the vehicle's computer system and perform a test drive to ensure the issue has been resolved.

Cost to Fix B2767 RAM

The typical repair costs for addressing the B2767 code can vary depending on the specific cause of the issue and the vehicle's make and model. In general, replacing the Left Impact Pressure Sensor can cost between $200 and $500, including parts and labor. However, additional costs may apply if there are wiring issues or problems with the airbag control module. It is advisable to consult with a professional mechanic or auto repair shop to get an accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary widely, so it's essential to research local rates for a more precise cost estimate.

Need more information about the B2767 RAM code?

Need more information on how to fix the B2767 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2767 RAM code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2767 RAM Code

1. What does the OBDII code B2767 RAM mean?

The B2767 code indicates an issue with the Left Impact Pressure Sensor, which is part of the vehicle's airbag system designed to detect side-impact collisions.

2. What are the common symptoms of the B2767 code?

Symptoms may include the airbag warning light illuminating, a malfunctioning side airbag system, or no visible symptoms in some cases.

3. What causes the B2767 RAM code to trigger?

Common causes include a faulty Left Impact Pressure Sensor, damaged wiring or connectors, or a malfunction in the airbag control module.

4. Is it safe to drive with the B2767 code active?

Driving may be safe under normal conditions, but the airbag system may not function properly in a collision, posing a safety risk.

5. How do I diagnose the B2767 code?

Diagnose the code by scanning the vehicle with an OBDII tool, inspecting the Left Impact Pressure Sensor and its wiring, and checking the airbag system for additional fault codes.

6. Can I fix the B2767 RAM code myself?

If you're experienced with automotive repairs, you can inspect and replace the sensor or repair damaged wiring. However, airbag systems are sensitive, and professional assistance is recommended.

7. How much does it cost to repair the B2767 RAM code?

Repair costs can vary but typically range from $100 to $400, depending on whether the sensor, wiring, or airbag module needs replacement.

8. Does the B2767 code always mean the sensor is faulty?

No, the issue could also be with the wiring, connectors, or airbag control module, so a thorough diagnosis is essential.

9. Will clearing the B2767 code fix the problem?

Clearing the code may temporarily turn off the warning light, but the issue must be resolved to prevent the code from returning.

10. Can a dead battery cause the B2767 code?

A dead or weak battery can sometimes cause electrical issues, including triggering airbag-related codes, but it’s not a common cause for this specific code.

Discuss the causes and fixes for B2767 RAM OBDII Code

Submit a New Comment

Code B2767 RAM comments

No comments found for this page.