Engine-Codes.com
Engine-Codes – Chrysler – B2767 Chrysler

B2767 Chrysler Code - Left Impact Pressure Sensor

Quick Answer

The B2767 Chrysler code refers to an issue with the Left Impact Pressure Sensor in the vehicle's system. Common causes include Damage to the Left Impact Pressure Sensor, Wiring issues or a poor connection in the sensor circuit, Faulty airbag control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2767 Chrysler indicates Left Impact Pressure Sensor.
Common causes
Common causes include Damage to the Left Impact Pressure Sensor, Wiring issues or a poor connection in the sensor circuit, Faulty airbag control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 13, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code B2767 Chrysler Description

The B2767 Chrysler code refers to an issue with the Left Impact Pressure Sensor in the vehicle's system. This sensor is responsible for detecting impacts or collisions on the left side of the vehicle and sending this information to the airbag control module. When this sensor malfunctions or fails, it can have serious implications for the vehicle's safety systems.

OBDII Code B2767 Chrysler - Left Impact Pressure Sensor
B2767 Chrysler Code - Left Impact Pressure Sensor

Common Causes of B2767 Chrysler

  1. Damage to the Left Impact Pressure Sensor.
  2. Wiring issues or a poor connection in the sensor circuit.
  3. Faulty airbag control module.
  4. Corrosion or debris affecting the sensor's performance.
  5. Impact or collision that caused damage to the sensor.

Symptoms of B2767 Chrysler

  1. Airbag warning light is illuminated on the dashboard.
  2. Airbags do not deploy in a collision on the left side of the vehicle.
  3. Seat belt pretensioners do not activate during a collision.
  4. Diagnostic trouble code B2767 is stored in the vehicle's system.

How to Fix B2767 Chrysler

  1. Begin by diagnosing the issue using a professional automotive scan tool to retrieve the specific trouble code and pinpoint the exact cause of the problem.
  2. Inspect the Left Impact Pressure Sensor and its wiring for any visible damage, corrosion, or loose connections. Repair or replace any damaged components.
  3. Test the sensor's functionality using a multimeter to ensure it is sending the correct signals to the airbag control module.
  4. If the sensor is functioning correctly, inspect the airbag control module for any faults or damage. Replace if necessary.
  5. Clear the trouble code from the vehicle's system and perform a test drive to verify that the issue has been resolved.

Cost to Fix B2767 Chrysler

The typical repair costs for addressing the B2767 Chrysler code can vary depending on the specific cause of the issue. In general, replacing a Left Impact Pressure Sensor can cost between $200 and $500, including parts and labor. However, if the issue is related to wiring or the airbag control module, the costs may be higher. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. It is advisable to consult with a professional technician to get a more accurate estimate based on your vehicle's make and model.

Need more information about the B2767 Chrysler code?

Need more information on how to fix the B2767 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2767 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2767 Chrysler Code

1. What does the OBDII code B2767 mean in a Chrysler vehicle?

The code B2767 indicates an issue with the Left Impact Pressure Sensor, which is part of the vehicle's airbag system responsible for detecting side impacts.

2. What are the symptoms of a B2767 code in a Chrysler?

Common symptoms include an illuminated airbag warning light, the airbag system being disabled, or no noticeable symptoms until the vehicle is scanned for codes.

3. What causes the B2767 code to appear?

Causes can include a faulty Left Impact Pressure Sensor, damaged wiring or connectors, corrosion in the sensor circuit, or a malfunction in the airbag control module.

4. Can I drive my Chrysler with the B2767 code active?

It is not recommended to drive with this code active, as the airbag system may not deploy correctly in the event of an accident, compromising safety.

5. How do I diagnose the B2767 code in a Chrysler?

Diagnosis involves scanning for codes, inspecting the Left Impact Pressure Sensor, checking the wiring and connectors for damage or corrosion, and testing the airbag control module if needed.

6. How can the B2767 code be fixed?

Repairs may include replacing the Left Impact Pressure Sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the airbag control module.

7. How much does it cost to repair the B2767 code in a Chrysler?

Repair costs vary but typically range from $100 to $500, depending on whether the sensor, wiring, or airbag module needs repair or replacement.

8. Can I reset the B2767 code without fixing the problem?

Resetting the code without addressing the cause is not recommended, as the issue will likely return and the airbag system may remain compromised.

9. Is the B2767 code specific to Chrysler vehicles?

While the code itself can appear in other brands, its definition and application to the Left Impact Pressure Sensor are specific to Chrysler vehicles.

10. What tools are needed to troubleshoot the B2767 code?

You’ll need an OBDII scanner capable of reading airbag system codes, a multimeter for testing electrical circuits, and possibly factory repair manuals for detailed wiring diagrams.

Discuss the causes and fixes for B2767 Chrysler OBDII Code

Submit a New Comment

Code B2767 Chrysler comments

No comments found for this page.