B2737 Jeep Code - Right Pedestrian Satellite Acceleration Sensor
Quick Answer
The B2737 diagnostic trouble code (DTC) for Jeep vehicles specifically refers to the Right Pedestrian Satellite Acceleration Sensor. Common causes include Sensor damage due to impact or corrosion, Wiring issues such as frayed or broken wires, Electronic malfunctions within the sensor module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2737 Jeep indicates Right Pedestrian Satellite Acceleration Sensor.
- Common causes
- Common causes include Sensor damage due to impact or corrosion, Wiring issues such as frayed or broken wires, Electronic malfunctions within the sensor module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2737 Jeep Description
The B2737 diagnostic trouble code (DTC) for Jeep vehicles specifically refers to the Right Pedestrian Satellite Acceleration Sensor. This sensor is a crucial component of the vehicle's safety system, particularly in the event of a collision. The sensor is responsible for detecting sudden changes in acceleration, which can indicate a potential impact with a pedestrian on the right side of the vehicle. When this sensor malfunctions or fails to operate correctly, it can compromise the effectiveness of the vehicle's safety features, such as pedestrian detection systems and airbag deployment.
Common Causes of B2737 Jeep
- Sensor damage due to impact or corrosion.
- Wiring issues such as frayed or broken wires.
- Electronic malfunctions within the sensor module.
- Software glitches affecting sensor calibration.
- Vehicle collision leading to sensor misalignment or damage.
Symptoms of B2737 Jeep
- Illumination of the airbag warning light on the dashboard.
- Inaccurate or delayed deployment of airbags in the event of a collision.
- Warning messages related to pedestrian detection system on the instrument cluster.
- Decreased overall safety system functionality.
How to Fix B2737 Jeep
- Begin by diagnosing the specific cause of the issue using a diagnostic scan tool to retrieve the fault codes and pinpoint the problem.
- Inspect the Right Pedestrian Satellite Acceleration Sensor for any visible damage or corrosion. Replace the sensor if necessary.
- Check the wiring harness connected to the sensor for any signs of damage or disconnection. Repair or replace any damaged wires.
- Perform a recalibration of the sensor using manufacturer-approved procedures to ensure accurate detection of pedestrian impacts.
- Clear the fault codes from the vehicle's system and test the sensor to verify proper functionality.
Cost to Fix B2737 Jeep
The typical repair costs for addressing the Right Pedestrian Satellite Acceleration Sensor issue can vary depending on the extent of the damage and the specific components that require replacement. In general, the cost of replacing the sensor itself can range from $150 to $300, while labor costs for diagnosis and repair can add an additional $100 to $200. Overall, the total repair cost for this issue may fall within the range of $250 to $500. It is important to note that these estimates are approximate and can vary based on factors such as location, vehicle make and model, and labor rates at auto repair shops. It is recommended to consult with a professional mechanic to obtain a more accurate cost estimate for this repair.
Tech Notes for B2737 Jeep
B2737-78 RIGHT PEDESTRIAN PROTECTION SATELLITE SENSOR ALIGNMENT OR ADJUSTMENT INCORRECT
Need more information about the B2737 Jeep code?
Need more information on how to fix the B2737 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2737 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2737 Jeep Code
1. What are the common symptoms of OBDII code B2737 in a Jeep related to the Right Pedestrian Satellite Acceleration Sensor?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.
2. What can cause the OBDII code B2737 to be triggered in a Jeep?
- The code B2737 is typically triggered by a malfunction or failure in the Right Pedestrian Satellite Acceleration Sensor.
3. How serious is the OBDII code B2737 related to the Right Pedestrian Satellite Acceleration Sensor in a Jeep?
- This code is considered serious as it indicates a potential problem with the airbag system, which is crucial for passenger safety in the event of a collision.
4. Can I continue driving my Jeep with the OBDII code B2737 present?
- It is not recommended to drive the vehicle with the B2737 code present, as it may compromise the proper functionality of the airbag system.
5. How can I diagnose and repair the OBDII code B2737 in my Jeep?
- Diagnosis and repair of the B2737 code should be performed by a qualified mechanic using specialized diagnostic equipment to pinpoint the exact issue with the Right Pedestrian Satellite Acceleration Sensor.
6. Are there any DIY tips for fixing the OBDII code B2737 in a Jeep?
- Due to the complexity of the airbag system and safety concerns, it is best to leave the diagnosis and repair of the B2737 code to professionals with the right expertise and tools.
7. How much does it typically cost to repair the OBDII code B2737 related to the Right Pedestrian Satellite Acceleration Sensor in a Jeep?
- The cost of repair can vary depending on the extent of the issue, parts needed, and labor costs. It is advisable to get a detailed quote from a reputable mechanic.
8. Can resetting the OBDII code B2737 in my Jeep temporarily fix the issue?
- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem with the Right Pedestrian Satellite Acceleration Sensor.
9. Is the Right Pedestrian Satellite Acceleration Sensor a common part to fail in Jeeps?
- While failures of the Right Pedestrian Satellite Acceleration Sensor are not as common as other components, they can still occur and should be addressed promptly.
10. How long does it typically take to repair the OBDII code B2737 in a Jeep?
- The repair time can vary depending on the exact cause of the B2737 code and the availability of parts. It is best to consult with a mechanic for an accurate estimate of the repair duration.
Discuss the causes and fixes for B2737 Jeep OBDII Code
Code B2737 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.