B2737 Dodge Code - Right Pedestrian Satellite Acceleration Sensor
Quick Answer
The B2737 diagnostic trouble code for Dodge vehicles indicates an issue with the right pedestrian satellite acceleration sensor. Common causes include Faulty right pedestrian satellite acceleration sensor, Damaged wiring or connectors leading to the sensor, Corrosion or poor connections in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2737 Dodge indicates Right Pedestrian Satellite Acceleration Sensor.
- Common causes
- Common causes include Faulty right pedestrian satellite acceleration sensor, Damaged wiring or connectors leading to the sensor, Corrosion or poor connections in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2737 Dodge Description
The B2737 diagnostic trouble code for Dodge vehicles indicates an issue with the right pedestrian satellite acceleration sensor. This sensor is responsible for detecting changes in acceleration on the vehicle's right side, particularly in the event of a collision with a pedestrian. The sensor plays a crucial role in activating safety systems such as airbags and seat belt pretensioners to protect pedestrians and occupants in case of an impact.
Common Causes of B2737 Dodge
- Faulty right pedestrian satellite acceleration sensor
- Damaged wiring or connectors leading to the sensor
- Corrosion or poor connections in the sensor circuit
- Issues with the electronic control unit (ECU) receiving signals from the sensor
- Impact or physical damage to the sensor causing malfunction
Symptoms of B2737 Dodge
- Airbag warning light illuminated on the dashboard
- Seat belt warning light stays on
- Inability of airbags to deploy in a collision
- Faulty or erratic readings from the right pedestrian satellite acceleration sensor
How to Fix B2737 Dodge
- Begin by conducting a thorough diagnosis using a professional diagnostic tool to pinpoint the exact cause of the issue.
- Inspect the right pedestrian satellite acceleration sensor, wiring, and connectors for any visible damage or corrosion.
- Test the sensor's functionality and signal output using a multimeter to determine if it is faulty.
- If the sensor is confirmed to be the culprit, replace it with a new, OEM part to ensure proper functioning.
- Clear the diagnostic trouble code from the vehicle's ECU and perform a final test to ensure the issue has been resolved.
Cost to Fix B2737 Dodge
The cost of repairing the right pedestrian satellite acceleration sensor can vary depending on the make and model of the vehicle, the location of the repair shop, and the specific parts required for the repair. On average, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $150 to $400. Overall, the total cost of repairing the B2737 code is estimated to be between $250 and $700. It is essential to consult with a professional mechanic or repair shop to get an accurate estimate based on the specific circumstances of the vehicle in question.
Tech Notes for B2737 Dodge
B2737-78 RIGHT PEDESTRIAN PROTECTION SATELLITE SENSOR ALIGNMENT OR ADJUSTMENT INCORRECT
Need more information about the B2737 Dodge code?
Need more information on how to fix the B2737 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2737 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2737 Dodge Code
1. What are the common symptoms of OBDII code B2737 (Dodge) related to the Right Pedestrian Satellite Acceleration Sensor?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system.
2. What causes OBDII code B2737 (Dodge) for the Right Pedestrian Satellite Acceleration Sensor?
- The code B2737 can be triggered by a faulty Right Pedestrian Satellite Acceleration Sensor or issues with the wiring connecting the sensor.
3. How can I diagnose the OBDII code B2737 (Dodge) for the Right Pedestrian Satellite Acceleration Sensor?
- Diagnosis typically involves using an OBDII scanner to read the code, checking the sensor and its wiring for any visible damage, and conducting further testing if needed.
4. Can I continue driving with OBDII code B2737 (Dodge) active?
- It is not recommended to continue driving with the B2737 code as it indicates a potential issue with the airbag system, which is crucial for safety.
5. How do I repair OBDII code B2737 (Dodge) for the Right Pedestrian Satellite Acceleration Sensor?
- To repair the B2737 code, you may need to replace the faulty Right Pedestrian Satellite Acceleration Sensor or repair any damaged wiring associated with the sensor.
6. Are there any DIY tips for fixing OBDII code B2737 (Dodge)?
- DIY tips may include checking the sensor connections for any loose or damaged wires, ensuring the sensor is securely mounted, and clearing the code with an OBDII scanner after any repairs.
7. Is it necessary to reset the OBDII code B2737 (Dodge) after repairs?
- Yes, it is important to reset the code after repairs to clear the error from the system and ensure proper functioning of the airbag system.
8. What are the potential risks of ignoring OBDII code B2737 (Dodge)?
- Ignoring the B2737 code can lead to potential safety risks in the event of a collision, as the airbag system may not deploy correctly if there is an issue with the Right Pedestrian Satellite Acceleration Sensor.
9. Can weather conditions affect the triggering of OBDII code B2737 (Dodge)?
- Extreme weather conditions or exposure to moisture can potentially affect the sensors and wiring associated with the Right Pedestrian Satellite Acceleration Sensor, leading to the B2737 code.
10. How can I prevent OBDII code B2737 (Dodge) from recurring in the future?
- To prevent the B2737 code from recurring, regular maintenance checks on the airbag system, including the Right Pedestrian Satellite Acceleration Sensor, are essential.
Discuss the causes and fixes for B2737 Dodge OBDII Code
Code B2737 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.