B2736 Chrysler Code - Left Pedestrian Satellite Acceleration Sensor
Quick Answer
The B2736 Chrysler diagnostic trouble code (DTC) indicates an issue with the Left Pedestrian Satellite Acceleration Sensor in the vehicle. Common causes include Physical damage to the sensor due to collisions or road debris, Wiring harness issues, such as frayed wires or loose connections, Electrical faults within the sensor itself. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2736 Chrysler indicates Left Pedestrian Satellite Acceleration Sensor.
- Common causes
- Common causes include Physical damage to the sensor due to collisions or road debris, Wiring harness issues, such as frayed wires or loose connections, Electrical faults within the sensor itself.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2736 Chrysler Description
The B2736 Chrysler diagnostic trouble code (DTC) indicates an issue with the Left Pedestrian Satellite Acceleration Sensor in the vehicle. This sensor is responsible for detecting the vehicle's acceleration and deceleration, providing crucial data to the vehicle's safety systems, such as the airbag deployment system and stability control. When this sensor malfunctions, it can have serious implications for the vehicle's safety and performance.
Common Causes of B2736 Chrysler
- Physical damage to the sensor due to collisions or road debris
- Wiring harness issues, such as frayed wires or loose connections
- Electrical faults within the sensor itself
- Corrosion or water damage affecting the sensor
- Faulty sensor calibration or programming
Symptoms of B2736 Chrysler
- Airbag warning light illuminated on the dashboard
- Stability control warning light activated
- Inaccurate readings from the acceleration sensor
- Vehicle may exhibit erratic acceleration or deceleration behavior
How to Fix B2736 Chrysler
- Begin by locating the Left Pedestrian Satellite Acceleration Sensor in the front bumper area of the vehicle.
- Inspect the sensor and wiring harness for any visible damage, such as cracks, dents, or loose connections.
- Test the sensor using a diagnostic tool to determine if it is sending accurate readings to the vehicle's systems.
- If the sensor is faulty, replace it with a new OEM or aftermarket sensor that is compatible with the vehicle.
- Clear the trouble codes from the vehicle's computer using a diagnostic tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix B2736 Chrysler
The typical repair costs for addressing a B2736 Chrysler code related to the Left Pedestrian Satellite Acceleration Sensor can range from $200 to $500, including parts and labor. However, it's important to note that prices can vary based on the vehicle make and model, location, and the specific repair shop. Diagnostic time and labor rates at auto repair shops can range from $80 to $150 per hour, with rates potentially higher in metropolitan areas or at dealerships. It's advisable to obtain quotes from multiple repair shops to compare prices and find the best option for your specific situation.
Tech Notes for B2736 Chrysler
B2736-78 LEFT PEDESTRIAN PROTECTION SATELLITE SENSOR ALIGNMENT OR ADJUSTMENT INCORRECT
Need more information about the B2736 Chrysler code?
Need more information on how to fix the B2736 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2736 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2736 Chrysler Code
1. What are the common symptoms of OBDII code B2736 in a Chrysler related to the Left Pedestrian Satellite Acceleration Sensor?
- Common symptoms include the illumination of the check engine light, erratic acceleration, or issues with the vehicle's stability control system.
2. What could cause the OBDII code B2736 in a Chrysler indicating a problem with the Left Pedestrian Satellite Acceleration Sensor?
- The code B2736 can be triggered by a faulty left pedestrian satellite acceleration sensor, damaged wiring, or issues with the sensor's calibration.
3. How can I diagnose the OBDII code B2736 in a Chrysler related to the Left Pedestrian Satellite Acceleration Sensor?
- Diagnosing code B2736 typically involves using a diagnostic scanner to retrieve the fault codes, performing a visual inspection of the sensor and its wiring, and conducting relevant tests as per the manufacturer's guidelines.
4. Can I drive my Chrysler with the OBDII code B2736 related to the Left Pedestrian Satellite Acceleration Sensor?
- It is not recommended to drive the vehicle with an active fault code related to the Left Pedestrian Satellite Acceleration Sensor, as it may affect the vehicle's performance and safety systems.
5. How can I reset the OBDII code B2736 in my Chrysler after repairing the issue with the Left Pedestrian Satellite Acceleration Sensor?
- Once the issue with the Left Pedestrian Satellite Acceleration Sensor is fixed, you can reset the fault code using a diagnostic scanner or by disconnecting the car's battery for a few minutes.
6. Are there any DIY repair tips for resolving the OBDII code B2736 in a Chrysler linked to the Left Pedestrian Satellite Acceleration Sensor?
- DIY repair tips may include checking and cleaning the sensor's connectors, inspecting the sensor's mounting for proper alignment, and ensuring there are no visible signs of damage to the sensor or its wiring.
7. Is it necessary to visit a dealership or mechanic to fix the OBDII code B2736 related to the Left Pedestrian Satellite Acceleration Sensor?
- While some repairs may require specialized tools and knowledge, basic troubleshooting steps for the Left Pedestrian Satellite Acceleration Sensor can often be performed by DIY enthusiasts with the right resources.
8. What is the function of the Left Pedestrian Satellite Acceleration Sensor in a Chrysler, and why is it important for vehicle safety?
- The Left Pedestrian Satellite Acceleration Sensor helps monitor the vehicle's acceleration and stability, playing a crucial role in the proper functioning of safety systems like stability control and pedestrian detection.
9. Can extreme weather conditions or rough driving terrain trigger the OBDII code B2736 related to the Left Pedestrian Satellite Acceleration Sensor in a Chrysler?
- Yes, extreme weather conditions, rough driving terrain, or physical impacts can potentially damage the Left Pedestrian Satellite Acceleration Sensor, leading to the triggering of code B2736.
10. How much does it typically cost to repair the OBDII code B2736 in a Chrysler attributed to the Left Pedestrian Satellite Acceleration Sensor?
- The cost of repairing the Left Pedestrian Satellite Acceleration Sensor can vary depending on the extent of the damage, labor costs, and whether OEM or aftermarket parts are used. It is advisable to get quotes from different repair shops for accurate pricing.
Discuss the causes and fixes for B2736 Chrysler OBDII Code
Code B2736 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.