B2722 Buick Code - PASS-Key Detection Circuit
Quick Answer
The B2722 Buick code refers to an issue with the PASS-Key detection circuit in the vehicle's security system. Common causes include Faulty key with a damaged resistor pellet, Malfunctioning ignition switch, Damaged or corroded wiring in the PASS-Key circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2722 Buick indicates PASS-Key Detection Circuit.
- Common causes
- Common causes include Faulty key with a damaged resistor pellet, Malfunctioning ignition switch, Damaged or corroded wiring in the PASS-Key circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2722 Buick Description
The B2722 Buick code refers to an issue with the PASS-Key detection circuit in the vehicle's security system. The PASS-Key system is designed to prevent unauthorized starting of the vehicle by requiring a specific key with a unique resistor pellet to be inserted into the ignition. When the key is inserted, the system reads the resistance of the pellet and compares it to the programmed value. If the values match, the system allows the vehicle to start.
Common Causes of B2722 Buick
- Faulty key with a damaged resistor pellet
- Malfunctioning ignition switch
- Damaged or corroded wiring in the PASS-Key circuit
- Defective PASS-Key module
- Poor connection between components in the system
Symptoms of B2722 Buick
- Difficulty starting the vehicle
- Intermittent starting problems
- Engine cranks but does not start
- Security light flashing on the dashboard
- Vehicle immobilized and unable to start
How to Fix B2722 Buick
- Inspect the key for damage and test the resistance of the pellet.
- Check the ignition switch for proper operation and replace if necessary.
- Inspect the wiring harness for any damage or corrosion and repair as needed.
- Test the PASS-Key module for faults and replace if found to be defective.
- Clear the diagnostic trouble codes from the system and test the vehicle to ensure proper starting.
Cost to Fix B2722 Buick
The cost of repairing a B2722 Buick code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, the parts and labor for this repair could range from $200 to $500. However, it's important to note that labor rates can vary widely, so it's advisable to check with local shops for a more accurate estimate. Keep in mind that this estimate does not include any additional diagnostic time that may be required to pinpoint the exact cause of the issue.
Need more information about the B2722 Buick code?
Need more information on how to fix the B2722 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2722 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2722 Buick Code
1. What does the OBDII code B2722 mean on a Buick?
The B2722 code indicates a fault in the PASS-Key detection circuit, which is part of the vehicle's anti-theft system.
2. What are common symptoms of the B2722 code in a Buick?
Symptoms may include the car not starting, the security light staying on or flashing, and intermittent starting issues.
3. What causes the B2722 PASS-Key Detection Circuit code to appear?
Common causes include a faulty ignition key resistor, worn key contacts, damaged wiring in the ignition lock cylinder, or a malfunctioning body control module (BCM).
4. Can I drive my Buick with a B2722 code?
It may be possible, but starting issues are likely. The anti-theft system could prevent the engine from starting altogether.
5. How do I diagnose a B2722 code on my Buick?
Diagnosis involves checking the key resistor value, inspecting the ignition lock cylinder wiring, and testing the body control module for faults.
6. Can a worn ignition key cause the B2722 code?
Yes, worn or damaged key contacts can lead to incorrect resistor values, triggering the code.
7. How do I fix the B2722 code on a Buick?
Repairs might include replacing the ignition key, repairing or replacing the ignition lock cylinder, or addressing damaged wiring in the PASS-Key system.
8. Does the B2722 code require programming after repairs?
If the body control module (BCM) or ignition components are replaced, reprogramming or relearning the system may be necessary.
9. How much does it cost to fix the B2722 code on a Buick?
Costs vary depending on the repair. A new key and reprogramming might cost $100–$200, while replacing the ignition lock cylinder or BCM could cost significantly more.
10. Can a dead battery cause the B2722 code?
A dead or weak battery typically won't cause this code but could contribute to electrical issues that complicate diagnosis.
Discuss the causes and fixes for B2722 Buick OBDII Code
Code B2722 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.