B2711 Code - Short Key Pellet
Quick Answer
The B2711 diagnostic trouble code (DTC) refers to a "Short Key Pellet." This code typically indicates a problem with the chip inside the key that communicates with the vehicle's immobilizer system. Common causes include Wear and tear on the key pellet, Damage to the key pellet due to dropping or mishandling of the key, Corrosion on the key pellet contacts. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2711 indicates Short Key Pellet.
- Common causes
- Common causes include Wear and tear on the key pellet, Damage to the key pellet due to dropping or mishandling of the key, Corrosion on the key pellet contacts.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2711 Description
The B2711 diagnostic trouble code (DTC) refers to a "Short Key Pellet." This code typically indicates a problem with the chip inside the key that communicates with the vehicle's immobilizer system. The key pellet is a small electronic device embedded in the key that sends a signal to the vehicle's immobilizer system to allow the engine to start. When a short circuit occurs in the key pellet, the vehicle may not recognize the key, resulting in starting issues or even immobilization of the vehicle.
Common Causes of B2711
- Wear and tear on the key pellet.
- Damage to the key pellet due to dropping or mishandling of the key.
- Corrosion on the key pellet contacts.
- Electrical issues in the immobilizer system.
- Faulty key pellet programming.
Symptoms of B2711
- Engine cranks but does not start.
- The vehicle's security light stays illuminated.
- Key is not recognized by the immobilizer system.
- Vehicle goes into anti-theft mode and does not start.
- Key fob does not unlock or lock the doors.
How to Fix B2711
- Replace the key pellet with a new one programmed to the vehicle's immobilizer system.
- Check for any corrosion on the key pellet contacts and clean if necessary.
- Inspect the key fob for any damage and replace if needed.
- Re-program the new key pellet to the vehicle's immobilizer system.
- Test the vehicle to ensure the issue is resolved and the key is recognized by the immobilizer system.
Cost to Fix B2711
The cost of repairing a short key pellet can vary depending on the make and model of the vehicle, the location of the repair shop, and the specific parts needed. On average, the cost of replacing a key pellet and reprogramming it can range from $100 to $300. Additional costs may apply if other components of the immobilizer system need to be inspected or repaired. It's recommended to get a few quotes from different repair shops to compare prices and services offered.
Need more information about the B2711 code?
Need more information on how to fix the B2711 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2711 code diagnosed by a professional: Find a repair shop in your area
Code B2711 Information for Specific Makes
- B2711 Buick — Short Key Pellet
- B2711 Cadillac — Short Key Pellet
- B2711 Chevrolet — Short Key Pellet
- B2711 GMC — Short Key Pellet
Frequently Asked Questions about B2711 Code
1. What does the OBDII code B2711 mean?
B2711 indicates an issue with the short key pellet circuit, typically found in vehicles with a key-based immobilizer system that uses resistor pellets for security.
2. What are the common symptoms of a B2711 code?
Symptoms may include the engine not starting, the security or anti-theft light staying illuminated, or intermittent starting issues.
3. What causes the B2711 code to trigger?
The code is usually caused by a faulty ignition key resistor pellet, damaged wiring in the key circuit, a malfunctioning ignition lock cylinder, or issues with the vehicle's theft deterrent module.
4. How can I diagnose a B2711 code?
Start by inspecting the key's resistor pellet for damage or wear, check the wiring in the ignition lock cylinder, and use a multimeter to measure the resistance of the key pellet and compare it to the vehicle's specifications.
5. Can a worn-out key cause the B2711 code?
Yes, a worn or damaged key with a faulty resistor pellet can cause this code, as the key's resistance value may not match what the system expects.
6. Is it safe to drive with a B2711 code?
Typically, the vehicle may not start with this code present, so it’s not a matter of safety but functionality. The car might not be drivable until the issue is resolved.
7. How is a B2711 code fixed?
Repairs may include replacing the ignition key, repairing or replacing the lock cylinder wiring, or reprogramming the theft deterrent module if necessary.
8. Can I bypass the key pellet to fix the B2711 code?
Bypassing the resistor pellet is not recommended, as it compromises the vehicle's anti-theft system and may void warranties or violate laws in some regions.
9. How much does it cost to repair a B2711 code?
Repair costs can vary but generally range from $100 to $300 depending on whether you need a new key, ignition cylinder, or wiring repairs.
10. Do I need to reprogram my vehicle after fixing the B2711 code?
In some cases, reprogramming the theft deterrent module or resetting the system may be required after repairs to clear the code and ensure proper operation.
Discuss the causes and fixes for B2711 OBDII Code
Code B2711 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.