B2699:02 Code - Right Headlamp Control Circuit Short to Ground
Quick Answer
The diagnostic trouble code (DTC) B2699:02 indicates a malfunction within the right headlamp control circuit, specifically a short to ground condition. Common causes include Damaged or frayed wiring in the headlamp circuit that creates a direct path to ground, Corrosion or poor connections at the headlamp connector or within the wiring harness, A faulty headlamp relay that may cause incorrect voltage distribution. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2699:02 indicates Right Headlamp Control Circuit Short to Ground.
- Common causes
- Common causes include Damaged or frayed wiring in the headlamp circuit that creates a direct path to ground, Corrosion or poor connections at the headlamp connector or within the wiring harness, A faulty headlamp relay that may cause incorrect voltage distribution.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2699:02 Description
The diagnostic trouble code (DTC) B2699:02 indicates a malfunction within the right headlamp control circuit, specifically a short to ground condition. This code is typically triggered when the vehicle’s onboard diagnostic system detects an abnormal voltage level in the headlamp control circuit, which is designed to regulate the operation of the right headlamp. A short to ground means that the electrical current intended for the headlamp is inadvertently being diverted to the vehicle's chassis or ground, leading to potential failure of the headlamp to illuminate properly.
Common Causes of B2699:02
- Damaged or frayed wiring in the headlamp circuit that creates a direct path to ground.
- Corrosion or poor connections at the headlamp connector or within the wiring harness.
- A faulty headlamp relay that may cause incorrect voltage distribution.
- Water intrusion or moisture accumulation in the headlamp assembly or wiring.
- Installation of aftermarket lighting components that are incompatible with the vehicle’s electrical system.
Symptoms of B2699:02
- Right headlamp fails to illuminate or flickers intermittently.
- Dashboard warning lights related to the lighting system are activated.
- Other electrical components may exhibit erratic behavior, such as dimming lights or malfunctioning indicators.
- Increased resistance in the electrical circuit may lead to blown fuses.
- Unusual noises or smells may emanate from the headlamp assembly or wiring harness.
How to Fix B2699:02
- Visual Inspection: Begin with a thorough visual inspection of the right headlamp assembly, wiring harness, and connectors for any signs of damage, corrosion, or loose connections.
- Test for Short Circuits: Use a multimeter to check for continuity in the wiring and identify any shorts to ground. This will help pinpoint the exact location of the issue.
- Repair or Replace Wiring: If damaged wiring is found, repair or replace the affected sections of the wiring harness to restore proper function.
- Check Headlamp Components: Inspect the headlamp relay and the headlamp itself for faults. Replace any components that are not functioning correctly.
- Reassemble and Test: After repairs, reassemble the headlamp assembly and test the circuit to ensure that the right headlamp operates correctly without any faults.
Cost to Fix B2699:02
The cost to repair a B2699:02 code can vary widely depending on the specific cause of the issue and the labor rates in your area. On average, the total repair cost can range from $100 to $500. This estimate includes parts such as wiring harnesses, connectors, or relays, which may cost between $20 and $150, and labor, which typically ranges from $80 to $150 per hour. It's important to note that diagnosis time and labor rates can vary based on factors such as location, vehicle make and model, and engine type. In metropolitan areas or at dealerships, rates may be higher, while independent shops often charge less. For a more precise estimate, it's advisable to check local rates and obtain quotes from multiple repair shops.
Tech Notes for B2699:02
B2699:02 Right Headlamp Control Circuit Short to Ground
B2699:04 Right Headlamp Control Circuit Open
Need more information about the B2699:02 code?
Need more information on how to fix the B2699:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2699:02 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2699:02 Code
No Frequently Asked Questions about B2699:02 Code found.
Discuss the causes and fixes for B2699:02 OBDII Code
Code B2699:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.