B2665 GMC Code - Park Lamp Switch Circuit High
Quick Answer
The B2665 GMC code indicates a problem with the park lamp switch circuit being too high. Common causes include Faulty park lamp switch, Corrosion or loose connections in the wiring related to the park lamp switch, Issues with the lighting control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2665 GMC indicates Park Lamp Switch Circuit High.
- Common causes
- Common causes include Faulty park lamp switch, Corrosion or loose connections in the wiring related to the park lamp switch, Issues with the lighting control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B2665 GMC Description
The B2665 GMC code indicates a problem with the park lamp switch circuit being too high. The park lamp switch is a component that controls the turning on and off of the park lights on a vehicle. When this circuit reads a high voltage, it means that there is an issue with the electrical connection or the switch itself. This can lead to the park lights not functioning properly, which can affect the visibility of the vehicle to other drivers, especially at night or in low light conditions.
Common Causes of B2665 GMC
- Faulty park lamp switch.
- Corrosion or loose connections in the wiring related to the park lamp switch.
- Issues with the lighting control module.
- Electrical short circuits in the park lamp circuit.
- Water damage or exposure to the elements affecting the switch or wiring.
Symptoms of B2665 GMC
- Park lights not turning on or off properly.
- Dim or flickering park lights.
- Warning light on the dashboard indicating a lighting system issue.
- Battery draining faster than usual.
How to Fix B2665 GMC
- Begin by inspecting the park lamp switch and its connections for any signs of damage or corrosion.
- Test the voltage in the circuit to determine if it is reading too high.
- Replace the park lamp switch if it is found to be faulty.
- Repair or replace any damaged wiring in the circuit.
- Reset the vehicle's computer system to clear the error code and test the park lights to ensure they are functioning properly.
Cost to Fix B2665 GMC
The cost of repairing a park lamp switch circuit high issue can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair costs for this issue can range from $100 to $300, including parts and labor. However, it is important to note that labor rates at auto repair shops can vary, typically ranging from $80 to $150 per hour. It is advisable to check with local repair shops for a more accurate estimate based on your specific vehicle make and model.
Need more information about the B2665 GMC code?
Need more information on how to fix the B2665 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2665 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2665 GMC Code
1. What does the OBDII code B2665 mean on a GMC?
B2665 indicates a "Park Lamp Switch Circuit High," meaning the vehicle's control module has detected a high voltage issue in the park lamp switch circuit.
2. What are the symptoms of the B2665 code in a GMC vehicle?
Common symptoms include malfunctioning or non-operational park lamps, dashboard warning lights, or issues with exterior lighting at night.
3. What causes the B2665 code to appear on a GMC?
The code can be triggered by a faulty park lamp switch, damaged wiring, corroded connectors, or a malfunctioning body control module (BCM).
4. Can I drive my GMC with the B2665 code active?
While the vehicle may still function, driving with this issue could reduce visibility at night and create a safety hazard. It’s best to address the problem promptly.
5. How is the B2665 code diagnosed on a GMC?
A technician will inspect the park lamp switch, check for damaged or corroded wiring, and test the circuit voltage to ensure it is within the correct range.
6. Can I fix the B2665 code on my GMC myself?
If you are experienced with automotive electrical systems, you can check for loose connections or damaged wiring. However, more complex repairs may require professional assistance.
7. How much does it cost to repair the B2665 code on a GMC?
Repair costs can vary but typically range from $100 to $300, depending on the cause, such as replacing a switch, repairing wiring, or addressing BCM issues.
8. What tools are needed to diagnose the B2665 code?
Tools include a diagnostic scanner, a multimeter for voltage testing, and potentially wiring diagrams specific to your GMC model.
9. Can a blown fuse cause the B2665 code on a GMC?
While a blown fuse is not a typical cause of this code, it’s worth checking the fuse associated with the park lamp circuit as part of the diagnosis.
10. Does the B2665 code reset itself after repairs?
The code may reset after the issue is fixed, but in many cases, you’ll need to use an OBDII scanner to clear the code manually.
Discuss the causes and fixes for B2665 GMC OBDII Code
Code B2665 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.